Skip to the content
12345678

OPA2340PA

Texas InstrumentsExtended

-40℃~+85℃ 0.2pA 0.2pA 150uV 2 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 50mA 6V/us 750uA 80dB Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS

Part id
ti/OPA2340PA
Category
Operational Amplifier
Package
PDIP-8
Pins
8
In stock
3 at JLCPCB (C544484)
Used on
16 open-source boards

Overview

The OPA2340PA is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -40℃~+85℃ 0.2pA 0.2pA 150uV 2 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 50mA 6V/us 750uA 80dB Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA2340, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 3 are in stock at JLCPCB (part C544484). 16 open-source boards in 11 repositories on GitHub use it.

Symbol

12-3+
Amplifier_Operational:OPA2340From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the OPA2340PA
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

16See all 16
  • 2 layers80 × 55.5 mmAudioBoard, the printed circuit board in 3D

    AudioBoard

    MarJong/AudioBoard

    120 parts1
  • 2 layers110.1 × 59.9 mmPerimeter sender v2, the printed circuit board in 3D

    Perimeter sender v2

    vasimv/myardumower

    Private-use only! (you need to ask for a commercial-use)

    35 parts1
  • 4 layers100 × 100 mmPROJECT VD KICAD, the printed circuit board in 3D

    PROJECT VD KICAD

    anhbuianhanhbaba-ui/MY_KICAD_PROJECT

    104 parts
  • 2 layers57.3 × 79.5 mmEsp32 example, the printed circuit board in 3D

    Esp32 example

    csteber02/ECE-445

    PCB Design of SAFF

    104 parts
  • 2 layers92 × 96 mmPrecond, the printed circuit board in 3D

    Precond

    liubo817/SPRO4

    49 parts
  • 4 layers100 × 100 mmProject VD, the printed circuit board in 3D

    Project VD

    taitannguyen17022005-dev/MY_KICAD_PROJECT_VD

    112 parts
  • 4 layers88 × 50 mmBBMini3, the printed circuit board in 3D

    BBMini3

    TheUncleKai/bbsensor

    BBQ Sensor

    105 partsApache-2.0
  • 4 layers193.7 × 142.2 mmCampKeen, the printed circuit board in 3D

    CampKeen

    TJLTM/CampKeen

    What this can monitor: 1. Holding Tanks - Grey/Sewage via galvanic sensors (posts in the tank) these are the ones i'm using (https://www.amazon.com/gp/product/B07YVK2V2K/ref=ppxyodtbsearchasintitle?ie=UTF8&psc=1 and…

    326 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2340PA?

Yes. The symbol is Amplifier_Operational:OPA2340 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2340PA?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2340PA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2340PA?

JLCPCB lists it as part C544484, with 3 in stock; the sellers' links on this page open their listings.

What can replace the OPA2340PA?

Parts like it in the library: the LM358AN by HGSEMI, the LM358GN by HTC Korea TAEJIN Tech, the NE5532N(XBLW) by XBLW and the LM358-DW by DOWO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2340PA?

16 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.