4 layers51.7 × 51.8 mm
Thunder4671
YaseenTwati/ThunderMini
A modular, stackable brushless motor driver platform based on the TMC6200, TMC4671, and STM32G473.
98 parts3
2 layers96.5 × 58.7 mm
JargonJolt
lgkh2002/ECE445This is the Git repository for the JargonJolt ECE445 project by Daniel Chamoun, Luke Hartmann, and Nan Kang.
- Size
- 96.5 × 58.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 68
- Pads
- 224
- Tracks, vias
- 469, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Feb 2024
- Updated
- 2 May 2024
Overview
JargonJolt is an open-source printed circuit board by lgkh2002, from the lgkh2002/ECE445 repository on GitHub. It is a 2-layer board of 96.5 × 58.7 mm with 75 parts on 68 nets, routed with 469 tracks and 57 vias.
It is built around the 74LVC3G17DP,125-JSM, ESP32-S3-WROOM-1-N16R2 and SS8050-G. Its parts include 19 resistors, 9 capacitors, 8 connectors, 6 switches and 5 diodes. It belongs with the ESP32 boards of this library.
Main components
3
74LVC3G17DP,125-JSM
TSSOP-8-40℃~+125℃ 1 1.65V~5.5V 24mA 24mA 3 3.6ns@3.3V,50pF 4uA 74LVC Power-off isolation、Level shifting Schmitt trigger Unidirectional TSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSJSMSEMIBuffers, Drivers, Receivers, Transceivers
ESP32-S3-WROOM-1-N16R2
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)
README
README.mdECE445
This is the Git repository for the JargonJolt ECE445 project by Daniel Chamoun, Luke Hartmann, and Nan Kang.
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R6, R10, R12, R14 |
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C6 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5 |
| 5 | R | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R19 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C9 |
| 3 | 1M | Resistor_SMD:R_0805_2012Metric | R9, R11, R13 |
| 3 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4, J5, J8 |
| 3 | SW_Push | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | SW4, SW5, SW6 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6, J7 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 100k_Potentiometer | Espressif:TRIM_3296W-1-104LF | RV1 |
| 1 | 74LVC3G17DP_125 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U4 |
| 1 | ADP3339 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1-N16R2 | Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | SW_DIP_x01 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | SW3 |
Questions
How big is the JargonJolt PCB?
It measures 96.5 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JargonJolt use?
75 parts, built around the 74LVC3G17DP,125-JSM, ESP32-S3-WROOM-1-N16R2 and SS8050-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JargonJolt KiCad files?
From the lgkh2002/ECE445 repository on GitHub, at the commit this page was made from: the board is KiCad/JargonJolt/JargonJolt.kicad_pcb and its schematic KiCad/JargonJolt/JargonJolt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the JargonJolt design in my own project?
Its repository states no licence, so its author keeps all rights: ask lgkh2002 before reusing the design.
Similar boards
- 2 layers56.6 × 70 mm
- 2 layers57.3 × 79.5 mm
- 2 layers89 × 45 mm
MonitoringSystem PCB
Danielbaker31/HouseholdWaterMonitoringSystem
This is a personal side project created by Daniel, Advait, and Jack. It is a household water monitoring system, allowing households to track how much water they are using, and pinpoint from which source it is coming…
96 parts - 2 layers65.9 × 44 mm
- 2 layers95 × 53.1 mm
Shematic for power and light system
jasmehar/Smart_motorcycle_helmet
Design report until i get the notebook
35 parts - 2 layers88.9 × 78.7 mm
RecordFlipper PCB
riyaanjain/VinylRecordFlipper_PCB
But each side of a 12 inch LP can only store about 20 minutes of music, and I don't necessarily love having to get up to flip the record often. I just wish that, after I put the record on, it would play the entire album.
34 parts - 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0