Skip to the content
2 layers20 × 110 mmDual ears, the printed circuit board in 3D

Blattwerk Eurorack modules. Designed by Lorenz Neumann

Size
20 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
125
Nets
73
Pads
330
Tracks, vias
1,320, 193
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Feb 2021
Updated
6 Mar 2025

Overview

Dual ears is an open-source printed circuit board by Cs4System, from the Cs4System/Eurorack repository on GitHub. It is a 2-layer board of 20 × 110 mm with 125 parts on 73 nets, routed with 1,320 tracks and 193 vias.

It is built around the LM324PW, OPA1641AID and PMEG2010AEB, with the WP710A10SEC/J3 and WP710A10SEC/J4 among its other parts. Its parts include 56 resistors, 30 capacitors, 20 diodes, 8 connectors and 6 ICs. It belongs with the audio and music boards of this library.

Main components

5

README

README.md

Eurorack

  • All files are published under CC BY-NC-SA 4.0 if not marked differently

  • DO NOT USE COMMERCIALLY!

  • Build for yourself or for a friend, but do not sell builds, PCBs, pannels or any parts of the designes in this repository!

  • Feel free to modify, copy and use all files provided here. If you want to publish derivative work, please do so under same license as original

  • Any feedback and collaboration is very welcome!

  • Please feel free to open an issue on the issues tab

Have you built a module and would like to say thank you? https://paypal.me/LorenzNeumann

Blattwerk - Betula

  • 8 channels In/Out ADAT Interface
  • Outputs are DC coupled
  • Inputs can be switched with jumpers between AC and DC coupling (In 2 groups: channel 1-4 and channel 5-8)
  • Low noise: -110dB
  • Low THD: >0.01% @ 1kHz, -6dB(+-5Vpp)
  • 22kOhm input-impedance, 1kOhm output-impedance
  • 8HP
  • All channels with bicolored indicator LED
  • ADAT sync indicator LED
  • No μController, no programming required, hardware only
  • CC BY-NC-SA 4.0 DO NOT USE COMMERCIALY!
  • small and dense SMD build (0603,TSSOP)
  • 180mA @ +12V and 100mA @ -12V (Without connected ADTA-signal: 14mA @ +12V and 0mA @ -12V)

Blattwerk - Salix

  • VCF based on the Moog Transistor Ladder Filter
  • Compensation for loss of bass in high resonance settings via potentiometer
  • 6,12,18,24 dB/Oct selectable via potentiometer or CV!
  • 2 Inputs with attenuator for audio and CV
  • Seperate V/Oct input.
  • Input-Drive indicator LED
  • 8HP
  • small and dense SMD build (0603, SOIC, SOT-363!) Not a beginner build, please be sure to have some SMD-soldering practice!
  • 45mA @ +12V and 25mA @ -12V
  • quick demo: https://youtu.be/XMdGtwIK5IQ

Transistor Ladder VCF

  • Deprecated version of Salix VCF
  • VCF based on the Moog Transistor Ladder Filter
  • Compensation for loss of bass in high resonance settings via potentiometer
  • 6,12,18,24 dB/Oct selectable via potentiometer or CV!
  • 2 Inputs with attenuator for audio and CV
  • Seperate V/Oct input.
  • Input-Drive indicator LED
  • 8HP
  • CC BY-NC-SA 4.0
  • small and dense SMD build (0603, SOIC, SOT-363!)
  • 45mA @ +12V and 25mA @ -12V
  • PCB and Panel is available at synthCube
  • Quick demo: https://youtu.be/XMdGtwIK5IQ

Dual Ears

  • BETA!
  • Modification of Mutable Instruments Ears
  • 2 seperat channels of original design, no internal contact microphone
  • no jumpers, fixed values for fast Envelope Follower and Gate-Threshold of 1V
  • 4HP
  • CC-BY-SA 3.0, Orginal schematics by Emilie Gillet
  • small and dense SMD build (0603, TSSOP)

Parts

125
QtyValueFootprintReferences
16200kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR16, R17, R21, R22, R24, R33, R34, R36, R39, R40, R41, R48, R50, R52, R53, R55
10100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R8, R9, R20, R27, R29, R30, R37, R47, R51
10100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC8, C9, C10, C11, C14, C16, C19, C20, C23, C30
1010kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R7, R11, R12, R18, R19, R25, R31, R44, R49
101N4148Diode_SMD:D_SOD-323_HandSolderingD3, D5, D6, D7, D8, D9, D11, D12, D13, D14
8510Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R13, R15, R26, R28, R38, R46, R54
64.7uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC4, C5, C15, C17, C24, C25
41.0MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R4, R35, R42
41uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC12, C13, C22, C29
420kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R10, R32, R45
468pCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC6, C18, C26, C28
4Audio-Jack-2_SwitchEigenes:Thonkicon_noGNDJ3, J4, J7, J8
4Audio-Jack-2_SwitchEigenes:ThonkiconJ1, J2, J5, J6
4LM324PWPackage_SO:TSSOP-14_4.4x5mm_P0.65mmIC2, IC3, IC5, IC6
21.0nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC21, C27
215kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR14, R56
222pCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC3, C7
222uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2
22k7Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR23, R43
250kBEigenes:Potentiometer_Alps_RK09K_HorizontalRV1, RV2
2AOL-3MWY4LED_THT:LED_D3.0mmLED2, LED6
2DNPEigenes:D_SOT-23D4, D10
2OPA1641Package_SO:VSSOP-8_3.0x3.0mm_P0.65mmIC1, IC4
2PMEG2010AEBDiode_SMD:D_SOD-323_HandSolderingD1, D2
2WE-CBF_0603Inductor_SMD:L_0603_1608MetricL1, L2
2WP710A10SEC/J3LED_THT:LED_D3.0mmLED1, LED4
2WP710A10SEC/J4LED_THT:LED_D3.0mmLED3, LED5
1M05X2PTHEigenes:Multicomp_MC9A12-1034_2x05x2.54mm_StraightJP1

More from Cs4System/Eurorack

5
  • 4 layers39.4 × 110.3 mmBetula Main, the printed circuit board in 3D

    Betula Main

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    176 parts83
  • 2 layers39.7 × 109.8 mmSalix VCF, the printed circuit board in 3D

    Salix VCF

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    126 parts83
  • 2 layers39.4 × 43.2 mmBetula Output, the printed circuit board in 3D

    Betula Output

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    77 parts83
  • 2 layers39.4 × 43 mmBetula Input, the printed circuit board in 3D

    Betula Input

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    69 parts83
  • 2 layers39.5 × 12.8 mmBetula ADAT, the printed circuit board in 3D

    Betula ADAT

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    6 parts83

Similar boards

  • 2 layers19 × 108.4 mmEars v40, the printed circuit board in 3D

    Ears v40

    jonstapleton/mutable_eurorack

    Eurorack modules

    80 parts
  • 2 layers88.9 × 106 mmMarbles v70, the printed circuit board in 3D

    Marbles v70

    mort13/clandestine_circuitry

    Collection of diy synth projects

    208 parts12GPL-3.0
  • 4 layers17.8 × 51.6 mmBonsai C4, the printed circuit board in 3D

    Bonsai C4

    customMK/Bonsai-C

    An open-source ARM-based microcontroller board

    59 parts71
  • 4 layers180.4 × 157.2 mmMx track, the printed circuit board in 3D

    Mx track

    freznel10/Zerf9

    Draft repo or Chunky v13 aka Zert9 MX_track

    300 parts20GPL-3.0
  • 2 layers130 × 115 mmFate, the printed circuit board in 3D

    Fate

    hasenbanck/fate

    An adapter to connect a high voltage electrostatic amplifier to an ADC for audio measurement

    33 parts1
  • 8 layers100 × 65 mmMatrixDrive RevB, the printed circuit board in 3D

    MatrixDrive RevB

    Matrixite/MatrixDrive

    MatrixDrive is a USB-loadable Mega Drive/Genesis cartridge

    143 parts
  • 2 layers45.7 × 22.9 mmSensors, the printed circuit board in 3D

    Sensors

    ten-point-nine/freETarget

    Electronic Air Rifle Target

    13 parts126
  • 2 layers100 × 90 mmCurrent dr amp, the printed circuit board in 3D

    Current dr amp

    werediver/current-dr-amp

    A current drive headphone amplifier

    83 parts7

Questions

How big is the Dual ears PCB?

It measures 20 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dual ears use?

125 parts, built around the LM324PW, OPA1641AID, PMEG2010AEB and WP710A10SEC/J3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dual ears KiCad files?

From the Cs4System/Eurorack repository on GitHub, at the commit this page was made from: the board is Dual Ears/PCB/dual_ears.kicad_pcb and its schematic Betula/Betula_ADAT/Betula_ADAT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dual ears design in my own project?

Its repository states no licence, so its author keeps all rights: ask Cs4System before reusing the design.