4 layers17.8 × 51.6 mm
2 layers130 × 115 mm
Fate
hasenbanck/fate1An adapter to connect a high voltage electrostatic amplifier to an ADC for audio measurement
- Size
- 130 × 115 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 15
- Pads
- 68
- Tracks, vias
- 57, 267
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Feb 2019
- Updated
- 9 Feb 2019
Overview
Fate is an open-source printed circuit board by hasenbanck, from the hasenbanck/fate repository on GitHub. It is a 2-layer board of 130 × 115 mm with 33 parts on 15 nets, routed with 57 tracks and 267 vias.
It is built around the PMEG2010AEB. Its parts include 12 resistors, 10 connectors and 4 diodes. It belongs with the audio and music and interfaces and adapters boards of this library.
Main components
1README
README.mdFate
Fate is a annutation adapter to connect an electrostatic amplifier with a ADC for audio measurments.
It steps down the voltage from maximal 1.6 kVpp down to 40 Vpp. It also contains some diodes for overvoltage protection (use low capacitance diodes).
Simulation
License
CERN Open Hardware License 1.2
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 35k | Resistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P30.48mm | R1, R2, R5, R6, R7, R8, R11, R12 |
| 4 | 1.8k | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_Horizontal | R3, R4, R9, R10 |
| 4 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_Drill2mm | J7, J8, J9, J10 |
| 4 | Conn_Coaxial | fate:CUI_RCJ-017 | J2, J3, J4, J5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | PMEG2010AEB | Diode_SMD:D_SOD-523 | D1, D2, D3, D4 |
| 2 | SYM_Flash_Large | Symbol:Symbol_HighVoltage_Type1_CopperTop_Big | SYM2, SYM3 |
| 2 | XLR3 | fate:XLR-NC3MA | J1, J6 |
| 1 | SYM_ESD_Large | Symbol:OSHW-Logo2_24.3x20mm_SilkScreen | SYM1 |
Similar boards
- 4 layers180.4 × 157.2 mm
- 8 layers100 × 65 mm
MatrixDrive RevB
Matrixite/MatrixDrive
MatrixDrive is a USB-loadable Mega Drive/Genesis cartridge
143 parts - 2 layers20 × 110 mm
- 2 layers19 × 108.4 mm
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915
Questions
How big is the Fate PCB?
It measures 130 × 115 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fate use?
33 parts, built around the PMEG2010AEB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fate KiCad files?
From the hasenbanck/fate repository on GitHub, at the commit this page was made from: the board is PCB/fate.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fate design in my own project?
Its repository states no licence, so its author keeps all rights: ask hasenbanck before reusing the design.