Skip to the content
12345678

OPA1641AID

Texas InstrumentsExtended

-40℃~+85℃ 0.00005% 1-Channel 1.8mA 2.25V~18V Overvoltage protection SOIC-8 Audio Amplifiers ROHS

Part id
ti/OPA1641AID
Category
Audio Amplifiers
Package
SOIC-8
Pins
8
In stock
2,972 at JLCPCB (C2057597)
Used on
14 open-source boards

Overview

The OPA1641AID is an audio Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+85℃ 0.00005% 1-Channel 1.8mA 2.25V~18V Overvoltage protection SOIC-8 Audio Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA1641, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 2,972 are in stock at JLCPCB (part C2057597). 14 open-source boards in 12 repositories on GitHub use it.

Symbol

2-3+4V-67V+
Amplifier_Operational:OPA1641From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA1641AID
PinNameType
1NCNot connected
2-Input
3+Input
4V-Power in
5NCNot connected
6—Output
7V+Power in
8NCNot connected

Open-source boards using it

14See all 14
  • 2 layers45.7 × 22.9 mmSensors, the printed circuit board in 3D

    Sensors

    ten-point-nine/freETarget

    Electronic Air Rifle Target

    13 parts126
  • 2 layers100 × 90 mmCurrent dr amp, the printed circuit board in 3D

    Current dr amp

    werediver/current-dr-amp

    A current drive headphone amplifier

    83 parts7
  • 2 layers90 × 52 mmChannel, the printed circuit board in 3D

    Channel

    yu2924/XPS

    preamplifier & power distributor for instruments

    68 parts3CC0-1.0
  • 2 layers80 × 10.2 mmMic, the printed circuit board in 3D

    Mic

    werediver/mic

    A phantom-powered balanced electret microphone interface

    26 parts2
  • 2 layers21.9 × 17.4 mmAUDIO, the printed circuit board in 3D

    AUDIO

    marilesh-kabilan/Audio-Amplifier-PCB

    6 parts
  • 2 layers20 × 110 mmDual ears, the printed circuit board in 3D

    Dual ears

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    125 parts83
  • 2 layers94 × 72.4 mmDac i2s nos, the printed circuit board in 3D

    Dac i2s nos

    schenkmi/electronic-projects

    misc electronic projects

    77 parts6CERN-OHL-W-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA1641AID?

Yes. The symbol is Amplifier_Operational:OPA1641 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA1641AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA1641AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA1641AID?

JLCPCB lists it as part C2057597, with 2,972 in stock; the sellers' links on this page open their listings.

What can replace the OPA1641AID?

Parts like it in the library: the TC8002D by FM, the LM833D by onsemi, the LM4871MX by Texas Instruments and the FM8002E by Shenzhen Fuman Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA1641AID?

14 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.