Skip to the content
2 layers45.7 × 22.9 mmSensors, the printed circuit board in 3D

Electronic Air Rifle Target

Size
45.7 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
16
Pads
47
Tracks, vias
91, 6
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Dec 2019
Updated
6 Nov 2026

Overview

Sensors is an open-source printed circuit board by ten-point-nine, from the ten-point-nine/freETarget repository on GitHub. It is a 2-layer board of 45.7 × 22.9 mm with 13 parts on 16 nets, routed with 91 tracks and 6 vias.

It is built around the OPA1641AID and CMC-2742PBJ-A. Its parts include 7 resistors, 3 capacitors, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.

Main components

2

README

README.md

freETarget

What is freETarget?

freETarget is an 'electronic target' (or E-Target) for small calibre (air) rifles and pistols. It uses microphones arranged around the target card to detect the impact of the bullet on the paper and then calculates the point of impact using triangulation. The basic principles are detailed in

It does this using relatively inexpensive electronics, based around the Arduino open-source ecosystem. This means you can have your own E-Target for a lot less than the current commercial offerings. How much exactly depends mostly on you own skill and effort. You can source and build everything yourself including the electronics and have a system running for around $200. If you want to have the electronics ready made, this price will be around $300.

And yes, we realize this isn't exactly 'free', but it's still pretty cheap for such a system.

Check out the BOM for the electronics to get a feel for the costs of that part. The enclosure can be as expensive as you want, in it's cheapest form it can be made of sturdy cardboard!

The second part of the solution is actually free and consists of the excellent frETarget software. This software offers incredible functionality and is maintained free of charge! See something you want changed, it's open-source, feel free to improve (and please share back).

How do I work with the firmware?

The firmware is written for an Arduino and the Arduino IDE. This makes it pretty accessible for anybody in the world. Lots of aftermarket support

The software starts with freETarget.ino. This is the startup and main control loop. The other files, gpio.ino are helper files to interface to various hardware elements. The heavy lifting is done buy the file compute_hit.ino.

I just want to build and upload the latest firmware

You can always download the latest firmware from https://www.free-e-target.com/downloads and upload the HEX file through the freETarget PC software.

If you want to build from source, just open the freETarget.ino file located in the freETarget subfolder in the Arduino IDE. You won't see any code, but hitting Verify and upload will work just the same.

I want to work on the PC source code

Great! The PC software is wrtten in C# using Visual Studio. You can download a free version from the Microsoft web site.

How do I work with the hardware?

The hardware is maintained in the electronics subfolder of the GIT repository and is developed in KiCad. Download and install KiCad EDA to work on the schematics and PCB's.

Tell me more

The documentation folder contains all of the documents that have been created for this project.

Theory of Operation details the algorithm and hardware used to detect the shot location

Building freETarget is the instructions for assembling a target

Mechanical Folder contains all of the mechanical drawings to complete your system

Parts

13
QtyValueFootprintReferences
50rResistor_SMD:R_0805_2012MetricR3, R4, R5, R6, R7
210u0Resistor_SMD:R_1206_3216MetricC2, C3
110K0Resistor_SMD:R_0805_2012MetricR2
122pfResistor_SMD:R_0805_2012MetricC1
12k2Resistor_SMD:R_0805_2012MetricR1
1BERG 2x6Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ1
1CMC-2742PBJ-ACMC-2742PBJ-A:CUI_CMC-2742PBJ-AMK1
1OPA1641Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmU1

More from ten-point-nine/freETarget

2
  • 2 layers31.8 × 20.3 mmFilter Network, the printed circuit board in 3D

    Filter Network

    ten-point-nine/freETarget

    Electronic Air Rifle Target

    10 parts126
  • 2 layers27.9 × 15.2 mmVoltage Reference, the printed circuit board in 3D

    Voltage Reference

    ten-point-nine/freETarget

    Electronic Air Rifle Target

    8 parts126

Similar boards

  • 2 layers100 × 90 mmCurrent dr amp, the printed circuit board in 3D

    Current dr amp

    werediver/current-dr-amp

    A current drive headphone amplifier

    83 parts7
  • 2 layers90 × 52 mmChannel, the printed circuit board in 3D

    Channel

    yu2924/XPS

    preamplifier & power distributor for instruments

    68 parts3CC0-1.0
  • 2 layers80 × 10.2 mmMic, the printed circuit board in 3D

    Mic

    werediver/mic

    A phantom-powered balanced electret microphone interface

    26 parts2
  • 2 layers21.9 × 17.4 mmAUDIO, the printed circuit board in 3D

    AUDIO

    marilesh-kabilan/Audio-Amplifier-PCB

    6 parts
  • 2 layers20 × 110 mmDual ears, the printed circuit board in 3D

    Dual ears

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    125 parts83
  • 2 layers94 × 72.4 mmDac i2s nos, the printed circuit board in 3D

    Dac i2s nos

    schenkmi/electronic-projects

    misc electronic projects

    77 parts6CERN-OHL-W-2.0
  • 2 layers19 × 108.4 mmEars v40, the printed circuit board in 3D

    Ears v40

    jonstapleton/mutable_eurorack

    Eurorack modules

    80 parts

Questions

How big is the Sensors PCB?

It measures 45.7 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sensors use?

13 parts, built around the OPA1641AID and CMC-2742PBJ-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensors KiCad files?

From the ten-point-nine/freETarget repository on GitHub, at the commit this page was made from: the board is KiCad/Sensors/Sensors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensors design in my own project?

Its repository states no licence, so its author keeps all rights: ask ten-point-nine before reusing the design.