Skip to the content
12345678

OPA1642AID

Texas InstrumentsExtended

-18V~-2.25V、2.25V~18V -40℃~+85℃ 0.00005% 1.8mA 2 Pairs Differential Inputs 2-Channel Overvoltage protection SOIC-8 Audio Amplifiers ROHS

Part id
ti/OPA1642AID
Category
Audio Amplifiers
Package
SOIC-8
Pins
8
In stock
11,218 at JLCPCB (C67640)
Used on
14 open-source boards

Overview

The OPA1642AID is an audio Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+85℃ 0.00005% 1.8mA 2 Pairs Differential Inputs 2-Channel Overvoltage protection SOIC-8 Audio Amplifiers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AS2376QM8-13, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 11,218 are in stock at JLCPCB (part C67640). 14 open-source boards in 9 repositories on GitHub use it.

Symbol

1OUT A2-IN A3+IN A4V-8V+
EasyEDA_Cloud:AS2376QM8-13From EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

14
Supply, least
4.5 V · V+, V–, single supply, recommended operating min · p. 6
Supply, most
36 V · V+, V–, single supply, recommended operating max · p. 6
Supply, least
2.25 V · V+, symmetrical dual supply, recommended operating min · p. 6
Supply, most
18 V · V+, symmetrical dual supply, recommended operating max · p. 6
Supply, least
18 V · V–, symmetrical dual supply, recommended operating min · p. 6
Supply, most
2.25 V · V–, symmetrical dual supply, recommended operating max · p. 6
Supply, absolute maximum
40 V · VS, total supply voltage, absolute max · p. 6
Works from
-55 °C · ambient operating range, min · p. 8
Works up to
125 °C · ambient operating range, max · p. 8
Junction, hottest
150 °C · junction temperature, absolute max · p. 6
Takes working
3.6 mA · sum of two amplifiers' quiescent currents, IOUT = 0 A, 25°C, typical · p. 8
Junction to air (D (SOIC))
160 K/W · junction-to-ambient, thermal information table · p. 6
Junction to board (D (SOIC))
60 K/W · junction-to-board, thermal information table · p. 6
Junction to case (D (SOIC))
75 K/W · junction-to-case top, thermal information table · p. 6

Open-source boards using it

14See all 14
  • 2 layers129.8 × 82 mmUberamp1, the printed circuit board in 3D

    Uberamp1

    DeepSOIC/uberamp1

    8-channel tpa3255 amp with dsp (adau1701) and bluetooth (esp32)

    585 parts3
  • 2 layers61.4 × 110.6 mmIRONMix, the printed circuit board in 3D

    IRONMix

    VoltageFoundryMod/IRONMix

    Eurorack Line-level mixer and Headphone Output module in 4HP

    97 parts2MIT
  • 2 layers22 × 37.2 mmHydrophone preamp, the printed circuit board in 3D

    Hydrophone preamp

    starlingcode/piezo-preamp

    phantom powered piezotransducer preamplifier

    34 parts1
  • 4 layers60 × 46 mmAFE v1, the printed circuit board in 3D

    AFE v1

    auselia/afe_pcb

    The first acoustic emission (AE) front-end board of Auselia. It turns the charge of a piezoelectric sensor into 14-bit samples and a wake-up signal.

    167 parts
  • 2 layersOpenmic, the printed circuit board in 3D

    Openmic

    oliverpaddock/OpenMic

    An open source audio interface

    432 partsCERN-OHL-S-2.0
  • 2 layers84 × 52 mmModulo3-fv1, the printed circuit board in 3D

    Modulo3-fv1

    nodep/myAmp

    Battery powered, solid state, guitar amplifier schematic and PCB

    57 parts4GPL-3.0
  • 4 layers85 × 55 mmInputSel, the printed circuit board in 3D

    InputSel

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    82 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA1642AID?

Yes. The symbol is EasyEDA_Cloud:AS2376QM8-13 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA1642AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA1642AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA1642AID?

JLCPCB lists it as part C67640, with 11,218 in stock; the sellers' links on this page open their listings.

What can replace the OPA1642AID?

Parts like it in the library: the TC8002D by FM, the LM833D by onsemi, the LM4871MX by Texas Instruments and the FM8002E by Shenzhen Fuman Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA1642AID?

14 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.