4 layers62.1 × 83.8 mm
Ss main board
loopj/short-stack
World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs
69 parts804
2 layers25.4 × 25.4 mm
CE PiicoDev Potentiometer
CoreElectronics/CE-PiicoDev-PotentiometerCE PiicoDev Potentiometer
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 24
- Pads
- 76
- Tracks, vias
- 155, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Mar 2022
- Updated
- 9 Jan 2023
Overview
CE PiicoDev Potentiometer is an open-source printed circuit board by CoreElectronics, from the CoreElectronics/CE-PiicoDev-Potentiometer repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 23 parts on 24 nets, routed with 155 tracks and 21 vias.
It is built around the ATTINY1616-MN. Its parts include 4 resistors, 3 connectors, 1 capacitor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdPiicoDev® Potentiometer
This is the repo for the Core Electronics PiicoDev Potentiometer.
License
This project is open source - please review the LICENSE.md file for further licensing information.
If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.
Attribution
"PiicoDev" and the PiicoDev logo are trademarks of Core Electronics Pty Ltd.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | CoreElectronics_Components:MountingHole_2.7mm_M2.5_PadClearance_1.2 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 2 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J2 | |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 120R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | ADDR | CoreElectronics_Components:SW_DIP_x04_Slide_CHS-04A1 | SW1 |
| 1 | ATtiny1616-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | Conn_01x05_Male | CoreElectronics_Components:TestPoint_Pad_D1.0mm_x05_Pattern1 | J3 |
| 1 | I2C PU | CoreElectronics_Components:SolderJumper-3_P1.3mm_Closed_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO_CoreElectronics_no-text | CoreElectronics_Artwork:CoreElectronics_logo_5mm_v2 | G2 |
| 1 | LOGO_PiicoDev | CoreElectronics_Artwork:piicodev_logo_14.2x3.4mm | G1 |
| 1 | LOGO_made-with-love | CoreElectronics_Artwork:piicodev_logo_14.2x3.4mm | G3 |
| 1 | Logo_Open_Hardware_Small | CoreElectronics_Artwork:oshw | LOGO1 |
| 1 | R_Potentiometer | CoreElectronics_Components:Potentiometer_Alps_RK09L_Single_Vertical | RV1 |
Questions
How big is the CE PiicoDev Potentiometer PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CE PiicoDev Potentiometer use?
23 parts, built around the ATTINY1616-MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CE PiicoDev Potentiometer KiCad files?
From the CoreElectronics/CE-PiicoDev-Potentiometer repository on GitHub, at the commit this page was made from: the board is PCB/CE-PiicoDev-Potentiometer.kicad_pcb and its schematic PCB/CE-PiicoDev-Potentiometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CE PiicoDev Potentiometer design in my own project?
Its repository states no licence, so its author keeps all rights: ask CoreElectronics before reusing the design.
Similar boards
- 2 layers80 × 50 mm
- 4 layers100 × 68 mm
- 2 layers56.9 × 23.6 mm
Hexagon
kieraneglin/hexagon-art
A passive breakout board: two lever-terminal inputs, three JST XH outputs, all six conductors (RX bus, two spares, +12V, GND, +5V) paralleled straight across. No active components, no regulation, nothing to configure.
24 parts19 - 4 layers44.5 × 44.5 mm
Flashlight
engineerbo/flashlight-dev-hw
This repository contains design files for the development board for a flashlight boost driver. The test firmware can be found in the firmware repository.
73 parts15MIT - 2 layers29 × 36 mm
Flux Capacitor Micro Pin Badge
hojadurdy/Flux_Capacitor_Micro
A tiny (36mm x 29mm) pin badge and keychain PCB version of Flux Capacitor featuring 25 animated LEDs that animate to create the “fluxxing” effect.
48 parts6 - 4 layers50.3 × 21.5 mm
- 2 layers25.4 × 52 mm
