
Esp32-c3-dip controller
haya1010/esp32-c3-safe-dip-led-controller
Protected ESP32-C3 2.54 mm DIP controller with USB-C and 3-channel 5/12/24 V LED PWM outputs

Digidraw is an open-source printed circuit board by cooper-campbell, from the cooper-campbell/senior_design_pcb_schematic repository on GitHub. It is a 2-layer board of 140 × 100 mm with 152 parts on 193 nets, routed with 1,096 tracks and 146 vias.
It is built around the STM32F051R8T6, STM32F407VGT6 and TPS63070RNMR, with the CAT24C256LI, LM317KCS and PCM5102PW among its other parts. Its parts include 57 capacitors, 53 resistors, 20 connectors, 9 ICs and 4 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R11, R12, R13, R14, R15, R17, R18, R20, R21, R22, R32, R33, R36, R38, R39 +7 |
| 17 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C7, C8, C22, C23, C24, C25, C26, C27, C29, C31, C32, C34, C37, C47, C54 +1 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C4, C6, C35, C51, C53, C56 |
| 6 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14, J15, J16, J17, J18, J19 |
| 5 | 0 | Resistor_SMD:R_0603_1608Metric | R3, R8, R19, R47, R49 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C10, C14, C15, C18, C19 |
| 5 | 470 | Resistor_SMD:R_0603_1608Metric | R29, R30, R31, R44, R45 |
| 4 | .1u | Capacitor_SMD:C_0603_1608Metric | C38, C39, C42, C43 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C40, C52 |
| 4 | 20p | Capacitor_SMD:C_0603_1608Metric | C11, C13, C28, C30 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C20, C21, C46 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C48, C49, C50 |
| 3 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J8, J9 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R10 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C16, C41 |
| 2 | 2.2n | Capacitor_SMD:C_0805_2012Metric | C36, C45 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R34, R35 |
| 2 | 8MHz | Crystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1, Y2 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J13 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3, J11 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | R_2k2 | Resistor_SMD:R_0603_1608Metric | R23, R24 |
| 1 | 1.5u | custom_fp:InductorWEPD | L1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C57 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 10u | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 208 | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R42 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C55 |
| 1 | 300k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 390 | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C44 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | 542 | Resistor_SMD:R_0603_1608Metric | R48 |
| 1 | 5k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 605k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 8k | Resistor_SMD:R_0603_1608Metric | R52 |
| 1 | 9.1 | Diode_SMD:D_0603_1608Metric | D6 |
| 1 | 97k | Resistor_SMD:R_0603_1608Metric | R53 |
| 1 | Barrel_Jack | digikey-footprints:Barrel_Jack_5.5mmODx2.1mmID_PJ-202A | J2 |
| 1 | CAT24C256 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U4 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J7 |
| 1 | FDD5614P | MOSFET_TI:ON_Semi-369AS-09_2016-O-0 | Q1 |
| 1 | LM317KCS | lm317_ti:LM317KCS | U8 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | PGB1010603MR | digikey-footprints:0603 | D1 |
| 1 | SN49B12B | digikey-footprints:Headphone_Jack_6.35mm_SN49B12B | CON1 |
| 1 | STM32F051R8T6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | STM32F407VGT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U5 |
| 1 | STMPS2141STR | digikey-footprints:SOT-753 | U7 |
| 1 | TPS63070RNMR | TI_REG:Texas_Instruments-RNM0015A-0-0-MFG | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J10 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | V7803-1500R | v7803:CONV_V7803-1500R | U2 |

haya1010/esp32-c3-safe-dip-led-controller
Protected ESP32-C3 2.54 mm DIP controller with USB-C and 3-channel 5/12/24 V LED PWM outputs

ersatzavian/yellow_fuzz
A bass fuzz for my good friend! Don't tell him, it's a surprise. Starting with a Boss MT-2 (I know, ew, don't tell anybody) because that's allegedly how Arion Salazar got most of his fuzz tone's on Third Eye Blind's…


cegep-electronique-programmable/pcb_alimentation_prototypage
Cette carte génére une tension de 3.3V ou 5V et se branche sur une plaquette de prototypage (breadboard).


MikiyasFekadu/Wifi-extender
I had a wifi range problem so I made an extender to fix it I have the wiring, code using Arduino IDE and the PCB in this repo


nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.
It measures 140 × 100 mm and has 2 copper layers, 1.6 mm thick.
152 parts, built around the STM32F051R8T6, STM32F407VGT6, TPS63070RNMR and CAT24C256LI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cooper-campbell/senior_design_pcb_schematic repository on GitHub, at the commit this page was made from: the board is digidraw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cooper-campbell before reusing the design.