

Cette carte génére une tension de 3.3V ou 5V et se branche sur une plaquette de prototypage (breadboard).
- Size
- 58.4 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 10
- Pads
- 61
- Tracks, vias
- 12, 0
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 May 2023
- Updated
- 4 Jun 2023
Overview
Breadboard psu is an open-source printed circuit board by cegep-electronique-programmable, from the cegep-electronique-programmable/pcb_alimentation_prototypage repository on GitHub. It is a 2-layer board of 58.4 × 71.1 mm with 22 parts on 10 nets, routed with 12 tracks and 0 vias.
It is built around the LM317KCS, RDER71H104K0K1H03B and EEU-EB1J100SB, with the 1N4001RLG, PJ-002A and XLUG12D among its other parts. Its parts include 5 connectors, 4 resistors, 3 capacitors, 2 diodes and 2 switches. It belongs with the power boards of this library.
Main components
6LM317KCS
TO-2200℃~+125℃@(Tj) 1 1.25V~37V 1.5A 10mA 40V 64dB@(120Hz) Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRDER71H104K0K1H03B
插件,P=5mm100nF 50V 5mm X7R ±10% Plugin,P=5mm Multilayer Ceramic Capacitors MLCC - Leaded ROHSMurataMultilayer Ceramic Capacitors MLCC - LeadedEEU-EB1J100SB
插件,D5xL12mm-40℃~+105℃ 10uF 12mm 30mA@120Hz 5000hrs@105℃ 5mm 5mm 63V ±20% 插件,D5xL12mm Aluminum Electrolytic Capacitors - Leaded ROHSPanasonicAluminum Electrolytic Capacitors - Leaded1N4001RLG
DO-41-65℃~+175℃ 1 Independent 1A 30A 50V 50nA@50V 930mV@1A DO-41 Diodes - General Purpose ROHSonsemiDiodes - General PurposePJ-002A
插件-25℃~+85℃ 2.5A 24V 2mm 5.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power ConnectorsXLUG12D
插件LED Indication - DiscreteSunLED
README
README.mdCarte d'alimentation de prototypage
Cette carte génére une tension de 3.3V ou 5V et se branche sur une plaquette de prototypage(breadboard).
La plage de tension d'entrée recommandée est 9V à 37V.

Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 330 | Library:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_Oversized | R1, R4 |
| 2 | Conn_02x02_Odd_Even | Library:PinHeader_2x02_P2.54mm_Vertical_Oversized | J2, J3 |
| 2 | SW_DPDT_x2 | Library:PinHeader_1x03_P2.54mm_Vertical_Oversized | SW1, SW2 |
| 1 | 0.1u | Library:C_Rect_L4.0mm_W2.5mm_P5.00mm_RDER71H104K0K1H03B | C2 |
| 1 | 100u | Library:CP_Radial_D6.3mm_P2.50mm_Oversized | C3 |
| 1 | 10u | Library:CP_Radial_D5.0mm_P5.0mm_EEU-EB1J100SB | C1 |
| 1 | 1N4001 | Library:D_DO-41_SOD81_P7.62mm_Horizontal_Oversized | D1 |
| 1 | 240 | Library:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_Oversized | R2 |
| 1 | 390 | Library:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_Oversized | R3 |
| 1 | Barrel_Jack_MountingPin | Library:BarrelJack_Horizontal_PJ-002A_Oversized | J1 |
| 1 | Conn_01x02 | Library:PinSocket_1x02_P2.54mm_Vertical_Oversized | J5 |
| 1 | Conn_02x04_Odd_Even | Library:PinHeader_2x04_P2.54mm_Vertical_Oversized | J4 |
| 1 | LED | Library:LED_D5.0mm_Oversized | D2 |
| 1 | LM317_TO-220 | Library:TO-220-3_Horizontal_TabDown_Connected_Oversized | U1 |
| 1 | LOGO | LOGO | G*** |
Similar boards
- 2 layers140 × 100 mm

- 2 layers49.5 × 43.2 mm

- 2 layers83 × 30 mm

Wifi extender
MikiyasFekadu/Wifi-extender
I had a wifi range problem so I made an extender to fix it I have the wiring, code using Arduino IDE and the PCB in this repo
11 parts - 2 layers111.8 × 71.1 mm

- 2 layers82.5 × 127 mm

Power supply
nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.
59 parts - 2 layers51.3 × 96.2 mm

Minisynth32
grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.
32 parts45CC-BY-SA-4.0 - 6 layers228.6 × 110.7 mm

Driver
thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules
690 parts4MIT - 2 layers65 × 30.5 mm

Led pi board
jrowe88/RPi-LED-RGBMatrix-Hat
Hardware hat for Raspberry Pi to support RGB Matrix and LED strips
32 parts2
Questions
How big is the Breadboard psu PCB?
It measures 58.4 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breadboard psu use?
22 parts, built around the LM317KCS, RDER71H104K0K1H03B, EEU-EB1J100SB and 1N4001RLG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breadboard psu KiCad files?
From the cegep-electronique-programmable/pcb_alimentation_prototypage repository on GitHub, at the commit this page was made from: the board is breadboard_psu.kicad_pcb and its schematic breadboard_psu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breadboard psu design in my own project?
Its repository states no licence, so its author keeps all rights: ask cegep-electronique-programmable before reusing the design.