4 layers130.2 × 115.2 mm
Controller board
oresat/oresat-solar-simulator-hardware
Solar simulator for our 1U solar panels
147 parts7CERN-OHL-S-2.0
2 layers65 × 30.5 mm
Led pi board
jrowe88/RPi-LED-RGBMatrix-Hat2Hardware hat for Raspberry Pi to support RGB Matrix and LED strips
- Size
- 65 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 71
- Pads
- 262
- Tracks, vias
- 701, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Mar 2019
- Updated
- 21 Mar 2019
Overview
Led pi board is an open-source printed circuit board by jrowe88, from the jrowe88/RPi-LED-RGBMatrix-Hat repository on GitHub. It is a 2-layer board of 65 × 30.5 mm with 32 parts on 71 nets, routed with 701 tracks and 33 vias.
It is built around the 74AHCT245D, ADS1015IRUGR and DMC3021LSD, with the PJ-002A among its other parts. Its parts include 11 connectors, 6 ICs, 5 resistors, 4 capacitors and 2 diodes. It belongs with the lEDs and displays boards of this library.
Main components
4
74AHCT245D
SOIC-20-300mil-40℃~+125℃ 1 11ns@5.5V,50pF 4.5V~5.5V 74AHCT 8 80uA 8mA 8mA Bidirectional TTL-compatible CMOS Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
ADS1015IRUGR
X2-QFN-10(1.5x2)-40℃~+125℃ 0.5LSB 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2 2V~5.5V 2uA 3.3kHz 6.144V Built-in Built-in I2C Sigma-Delta Support Yes X2-QFN-10(1.5x2) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
DMC3021LSD
SO-8-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.45V、1.7V 105pF、118pF 110pF、125pF 14mΩ@10V、30mΩ@10V 16.1nC@10V、21.1nC@10V 2.5W 30V、30V 767pF、1.002nF 7A、8.5A Common source N-Channel + P-Channel SO-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
PJ-002A
插件-25℃~+85℃ 2.5A 24V 2mm 5.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power Connectors
README
README.mdled_pi_board
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | 74AHCT245 | Footprints:SOP65P640X110-20N | U2, U3, U4 |
| 3 | Conn_01x04 | Footprints:PinSocket_1x04_P2.54mm_Vertical | J6, J7, J11 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | Footprints:LOGO | LOGO | |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | ADS1015IRUGR | Footprints:SOP50P490X110-10N | U5 |
| 1 | CP | Footprints:2917 Cap | C3 |
| 1 | Conn_01x03 | Footprints:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x04 | Footprints:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x25 | Footprints:PinHeader_1x25_P2.54mm_Vertical | J4 |
| 1 | Conn_02x08_Odd_Even | Footprints:PinSocket_2x08_P2.54mm_Vertical | J8 |
| 1 | Conn_02x20_Odd_Even | Footprints:PinHeader_2x20_P2.54mm_Vertical_SMD | J10 |
| 1 | DMC3021LSD | Footprints:SO-8 | U6 |
| 1 | MAX4866LEUT-T | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | MBR0120 | Footprints:D_SOD-123 | D1 |
| 1 | PJ-002A | Footprints:CUI_PJ-002A | J1 |
| 1 | Raspberry_Pi_2_3 | Footprints:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | SJ Open 3 | Footprints:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Screw_Terminal_01x02 | Footprints:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | green LED | Footprints:LED_0603_1608Metric | D2 |
The 30 most common of 32 parts.
Similar boards
- 4 layers91.5 × 91.5 mm
- 4 layers304.8 × 330.2 mm
- 4 layers152.4 × 64.8 mm
Breakout
adrienkohlbecker/BB816
A homebrew 16 bit breadboard computer based on WDC's 65C816 processor
83 parts52 - 4 layers70 × 56 mm
Pi adapter hc
hzeller/spixels
Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).
40 parts41LGPL-3.0 - 2 layers76.2 × 134.1 mm
Multiplier board
michaelkamprath/minimal-64x4-expansion-cards
A set of expansion boards for the Minimal 64x4 Home Computer
80 parts19 - 4 layers401.3 × 203.2 mm
Cpu010
thorpej/pg68k
The 68k Playground, a 680x0-based home-brew computer with multiple CPU options
272 parts15 - 4 layers306 × 244 mm
Questions
How big is the Led pi board PCB?
It measures 65 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led pi board use?
32 parts, built around the 74AHCT245D, ADS1015IRUGR, DMC3021LSD and PJ-002A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led pi board KiCad files?
From the jrowe88/RPi-LED-RGBMatrix-Hat repository on GitHub, at the commit this page was made from: the board is led_pi_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led pi board design in my own project?
Its repository states no licence, so its author keeps all rights: ask jrowe88 before reusing the design.