Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers53.6 × 58.4 mmHeltec v3 adapter, the printed circuit board in 3D

    Heltec v3 adapter

    twinoak/twinoak.meshcore.standard-repeater-design-v2

    It was decided to go for a design which incorporated an LTE-M module for managinge the node. This gives almost 100% coverage(in Denmark at least!) and high bandwidth for firmware transfers.

    5 partsMIT
  • 2 layers53.6 × 58.4 mmRak4630-adapter, the printed circuit board in 3D

    Rak4630-adapter

    twinoak/twinoak.meshcore.standard-repeater-design-v2

    It was decided to go for a design which incorporated an LTE-M module for managinge the node. This gives almost 100% coverage(in Denmark at least!) and high bandwidth for firmware transfers.

    26 partsMIT
  • 2 layers10.2 × 20.8 mmBmi088 breakout board, the printed circuit board in 3D

    Bmi088 breakout board

    uastw-embsys/bmi088_breakout_board

    BMI088 IMU Breakout Board

    4 partsLGPL-3.0
  • 2 layers13.7 × 10.8 mmDps368 breakout board, the printed circuit board in 3D

    Dps368 breakout board

    uastw-embsys/dps368_breakout_board

    Infineon DPS368 Barometer Breaout Board

    4 partsLGPL-3.0
  • 2 layers26.7 × 24.1 mmDps368-microbus breakout, the printed circuit board in 3D

    Dps368-microbus breakout

    uastw-embsys/dps368_breakout_board

    Infineon DPS368 Barometer Breaout Board

    8 partsLGPL-3.0
  • 2 layers22.9 × 33 mmBreakout boards, the printed circuit board in 3D

    Breakout boards

    UltraBoard/yoctoboard-electronics

    PCB design files for the yoctoboard

    6 partsGPL-3.0
  • 2 layers72.5 × 61.5 mmBreakout boards, the printed circuit board in 3D

    Breakout boards

    UMSATS/SRAD-AvionicsComputer

    This repository contains the schematic, PCB, and supporting design files for the Student Researched and Designed (SRAD) rocket avionics computer.

    54 parts
  • 2 layers98 × 99.8 mmMess Breakout, the printed circuit board in 3D

    Mess Breakout

    unicab369/IOT-Mess-Hardware

    108 parts
  • 2 layers38.1 × 50.8 mmQsop adapter wrong, the printed circuit board in 3D

    Qsop adapter wrong

    University-of-Glasgow-TDP4-2023/COMMS

    Communications team repo

    5 parts
  • 8 layers52 × 36 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    usbalbin/hw-half-bridge

    100 parts
  • 2 layers41.9 × 31.8 mm4ButtonBreakout, the printed circuit board in 3D

    4ButtonBreakout

    UserHackable/Breakouts

    Breakouts

    9 parts
  • 2 layers27.9 × 31.8 mmJoystick, the printed circuit board in 3D

    Joystick

    UserHackable/Breakouts

    Breakouts

    7 parts
  • 2 layers38.1 × 11.4 mmLed Bar, the printed circuit board in 3D

    Led Bar

    UserHackable/Breakouts

    Breakouts

    9 parts
  • 2 layers25.4 × 12.1 mmUsbA, the printed circuit board in 3D

    UsbA

    UserHackable/Breakouts

    Breakouts

    6 parts
  • 2 layers17.8 × 12.7 mmUSBMiniBPower, the printed circuit board in 3D

    USBMiniBPower

    UserHackable/Breakouts

    Breakouts

    3 parts
  • 2 layers22.9 × 25.4 mmRJ11-ICSP Breakout, the printed circuit board in 3D

    RJ11-ICSP Breakout

    UserHackable/HBridge84

    This is the User Hackable HBridge84 Project.

    4 parts
  • 2 layers101.6 × 50.8 mmADC Breakout, the printed circuit board in 3D

    ADC Breakout

    UVicRocketry/A3-Sensors-DAQ

    A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software.

    52 parts
  • 2 layers31.8 × 31.8 mmTransciever Breakout, the printed circuit board in 3D

    Transciever Breakout

    UVicRocketry/A3-Sensors-DAQ

    A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software.

    21 parts
  • 2 layers36 × 22.5 mmCAN Bus Arduino, the printed circuit board in 3D

    CAN Bus Arduino

    uwsailbot/electrical_board_designs_2018

    Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

    18 parts
  • 2 layers30.5 × 29.2 mmMicro Arduino Breakout, the printed circuit board in 3D

    Micro Arduino Breakout

    uwsailbot/electrical_board_designs_2018

    Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

    25 parts