Interfaces and adapters

7,328 boards

2 layers88 × 70 mm
Breakout Potentiometer Panel
theWickedWebDev/Modular-Synth

81 parts
2 layers22 × 26 mm
Sensor breakout
thewriterben/OpenCircuitCore
Electronics engine: circuits as atopile code, verified and emitted through KiCad
6 partsApache-2.0
2 layers61.5 × 34 mm
Bridge Rectifier Layout
thisisarjun18/PCB-PROJECTS
PCB design projects created in KiCad, including schematic capture, PCB layout, routing, and hardware prototyping.
10 parts
2 layers18.8 × 41.7 mm
Cloneless breakout v1
ThorbenMoos/Cloneless_artifacts
PCB designs, FPGA controllers, verification collateral and software artifacts related to the Cloneless series of tamper-resistant open-source ASICs
3 partsGPL-3.0
2 layers33 × 15.2 mm
CAN Bus
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
5 parts
2 layers11.2 × 26 mm
Warp front panel adapter pcb
Tinkerforge/warp-front-panel-bricklet
This Bricklet together with the ESP32 Ethernet Brick form the hardware used in the WARP Energy Manager 2.0
3 parts
2 layers34 × 11.9 mm
IsoSPI interface
tinkeringjoe/HRBbms
A BMS Design for the 400V HRB project.
10 partsMIT
2 layers58 × 52 mm
Adapter tt06-cb tt04-db
TinyTapeout/adapter-pcb
For interfacing between different versions of the carrier board and the demo board
6 partsApache-2.0
2 layers10.9 × 20 mm
Modbus Adapter
titetil/smart-tank-pcb

2 parts
2 layers72.9 × 71.1 mm
AMS - CANBus Sensor - IO
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
34 parts
2 layers72.9 × 71.1 mm
AMS - CANBus Sensor - RPM
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
52 parts
2 layers72.9 × 71.1 mm
AMS - CANBus Sensor - Temperature - RTD
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
59 parts
2 layers72.9 × 71.1 mm
AMS - CANBus Sensor - Vacuum
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
51 parts
2 layers72.9 × 71.1 mm
AMS - CANBus Sensor - Voltage
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
44 parts
2 layers72.9 × 71.1 mm
AMS - CANBus Sensor - Voltage - 2 Out Daughter board
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
15 parts
4 layers50.4 × 49.6 mm
Automotive Monitoring System CANBus Sensor
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
30 parts
4 layers50.4 × 49.6 mm
Automotive Monitoring System CANBus Sensor SMD Processor
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
30 parts
2 layers90.2 × 95.9 mm
REVERB Interface
TJREVERB/reverb_interface
Interface board rework, moved from Eagle to Kicad
69 parts
2 layers90.2 × 95.9 mm
REVERB Interface
TJREVERB/reverb_interface
Interface board rework, moved from Eagle to Kicad
62 parts
2 layers90.2 × 95.9 mm
REVERB Interface
TJREVERB/reverb_interface
Interface board rework, moved from Eagle to Kicad
71 parts
2 layers37.3 × 19.8 mm
CAN Adapter
tlsystems/BreakoutBoards

5 parts
2 layers
CAN Breakout
tlsystems/BreakoutBoards

9 parts
2 layers50.8 × 40.6 mm
H10-Breakout
tlsystems/H10-Paper-Tape-Reader-Punch

3 parts
2 layers13 × 52 mm
Jetson rtc
tmcit-ararobo-2026a/jetson-interface-board
Jetsonのヘッダーに取り付けてCANトランシーバーやデバッグ用USBポートを搭載する基板
12 partsMIT