2 layers43 × 41 mm
Df40-adapter
mikegoelzer/Homebrew-ECP5-SBC
Kicad files for homebrew hobbyist computer with custom RISC-V CPU
7 parts
Interfaces and adapters
7,328 boards- 2 layers55.6 × 22.9 mm
- 2 layers86 × 66.1 mm
Mayfly adapter v1p1 revC
millerlp/Mayfly_adapter
Circuit board for interfacing 8 analog sensors with EnviroDIY Mayfly v1.1
24 partsGPL-3.0 - 2 layers19.3 × 14.5 mm
- 2 layers60 × 65.6 mm
- 2 layers38.1 × 28.4 mm
UV Vis Spectrometer LED Breakout
MissouriMRDT/UV-Vis_Spectrometer_Hardware
Schematics and Layouts for the UV-Vis Spectrometer Board.
18 parts - 2 layers24 × 39 mm
- 2 layers37 × 24.5 mm
TPA6111A2-breakout
mjhagen/dap
Firmware for a portable DAP using a AVR128DA48 and VS1063 chip.
14 parts - 2 layers42.2 × 42.2 mm
- 2 layers132.1 × 81.9 mm
Zx50 Serial
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
24 parts - 4 layers132.1 × 81.9 mm
Zx50 Serial
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
25 parts - 2 layers50 × 33.5 mm
Bridge rectifier
Mo-Kara/kicad-learning-projects
KiCad practice boards recreated from public tutorials while learning PCB design
10 parts - 2 layers28 × 31 mm
AS5600 Encoder Node
mohamed-belal-10/can-motor-controller-node
CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB
9 partsMIT - 2 layers100.5 × 34 mm
Project 5 Dc H bridge controller
MohammedjavidjafirN/PCB-Design
This section contains all my PCB design files which i created using KICAD software for Hardware design practice
10 parts - 2 layers107 × 229.1 mm
HDMI to DB9
morgensternR/CryoChamberPCBs
MicroD Adapter and Vacuum Feedthrough for KF40 & KF50
30 parts - 2 layers53.3 × 44.5 mm
Atx breakout
mothdotmonster/random-pcbs
This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.
15 parts - 2 layers63 × 23.5 mm
Jetson breakout
Mouse-GYM/auto-trainer-hardware
Repository for hardware, firmware, and software related to the Mouse-GYM modules
19 parts - 2 layers
IS250 Interface Board SMT Edition
MrArgon39/SimDrivingCockpit
All the code and other assorted stuff for this project
57 parts - 2 layers100 × 66.4 mm
- 2 layers38 × 35.5 mm
- 2 layers36.1 × 29.2 mm
Lmv324 breakout
msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025
16 parts - 2 layers47.1 × 42 mm
- 2 layers40 × 130.5 mm
- 2 layers82 × 50 mm
