Interfaces and adapters

7,328 boards

2 layers46.4 × 24.5 mm
Picolock breakout board
stellarcorp/tvsc
Core software repository for the Tennessee Valley Stellar Corporation
3 parts1MIT
2 layers50 × 32 mm
System bus breakout board
stellarcorp/tvsc
Core software repository for the Tennessee Valley Stellar Corporation
13 parts1MIT
2 layers90 × 45 mm
Qc3-adapter
tai/qc3-adapter
QC3.0 to 3.6-20V DC Adapter
23 parts1
2 layers30.3 × 65.8 mm
Electrode Breakout
TallesSantosCUBoulder/EIT-Capstone-Project-2023
This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.
6 parts1MIT
2 layers36.3 × 46.2 mm
Electrode Select Breakout
TallesSantosCUBoulder/EIT-Capstone-Project-2023
This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.
3 parts1MIT
2 layers15.7 × 51.6 mm
Power Breakout
TallesSantosCUBoulder/EIT-Capstone-Project-2023
This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.
6 parts1MIT
2 layers25.6 × 36 mm
MS88SF2 breakout
tantecky/embedded
My stuff for embedded devices
5 parts1
2 layers19.4 × 14.2 mm
BodgePCB
Techbeard/RS485_WS2811_10W
RS485 WS2811 10W RGB LED Treiber
12 parts1
2 layers
LED PCB 60mm
Techbeard/RS485_WS2811_10W
RS485 WS2811 10W RGB LED Treiber
10 parts1
4 layers45 × 20 mm
Klipper To CACKLE
techy-robot/Meteoroid
Production-ready 3d printer based on a Ender 5 frame, with multifunction tool changing.
41 parts1
2 layers45.5 × 15.2 mm
H Bridge PCB
Terrapin-Rocket-Team/Payload
Code and PCBS for the payload team
7 parts1MIT
4 layers
Bridge
theatrus/tsumikoro
What if you made lots of spheres roll around?
30 parts1
4 layers20.1 × 18.7 mm
Display Interface Debuger
theBrutzler/BrutzelBoy_V2
Next level Brutzelboy, based on RK3566
54 parts1
2 layers74 × 66.5 mm
TTL to HDMI
theBrutzler/HDMI_to_TTL
Extension for R1gol_DS1054Z
42 parts1
2 layers
RJ12-breakout
TheGreyGhost/SolarPoolHeater
Arduino controller for solar pool heating
3 parts1
2 layers56.6 × 48.3 mm
Resolver adapter
thewonderidiot/cdu
Tools for reverse-engineering, simulating, and interfacing with the Coupling Data Unit (CDU), one of Apollo's most infamous boxes
15 parts1MIT
4 layers24.4 × 16.4 mm
Servo adapter
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
14 parts1GPL-3.0
2 layers30.5 × 19 mm
Teleinfo bridge
tiramiseb/domotego_pcbs
Helpful PCBs for DIY home automation
8 parts1
2 layers20.3 × 22.2 mm
Teleinfo bridge for rpi
tiramiseb/domotego_pcbs
Helpful PCBs for DIY home automation
7 parts1
4 layers58.4 × 99.1 mm
Bridge Controller
tkeller12/openEPR
Open-Source EPR Spectrometer
125 parts1MIT
2 layers28.4 × 47.9 mm
Jtag sniffer jig
tnishinaga/seccamp2022_pcb

4 parts1
2 layers89.9 × 100.5 mm
Jtag sniffer jig
tnishinaga/seccamp2022_pcb

24 parts1
4 layers56.3 × 39.7 mm
FOC DualDRV8323
totaldesaster/SimpleFOC-Serial-Driver
Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.
66 parts1GPL-3.0
4 layers56.3 × 39.7 mm
FOC PowerDRV8323
totaldesaster/SimpleFOC-Serial-Driver
Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.
34 parts1GPL-3.0