Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers114.3 × 31.8 mmControl Box Interface Board, the printed circuit board in 3D

    Control Box Interface Board

    stormbots/MarketingBot

    See the attached Wiki for documentation about the general system functionality

    13 parts3
  • 2 layers21.3 × 14.5 mmSDM27 breakout, the printed circuit board in 3D

    SDM27 breakout

    sundevilmotorsports/pcb-dev

    PCB development repository

    8 parts3
  • 2 layers48 × 62 mmMega adapter, the printed circuit board in 3D

    Mega adapter

    teaguecl/nes_tengen_rambo1_research

    Reverse engineering of the Tengen RAMBO-1 (337006, iNES mapper 64): findings, emulator guide, FPGA notes, hardware-verified test ROMs, jig and adapter designs

    2 parts3MIT
  • 2 layers75 × 96 mmRp2350 adapter, the printed circuit board in 3D

    Rp2350 adapter

    teaguecl/nes_tengen_rambo1_research

    Reverse engineering of the Tengen RAMBO-1 (337006, iNES mapper 64): findings, emulator guide, FPGA notes, hardware-verified test ROMs, jig and adapter designs

    23 parts3MIT
  • 4 layers32.5 × 32.5 mmBus Isolator, the printed circuit board in 3D

    Bus Isolator

    TERA-TU-Graz/BatteryManagement_2017

    26 parts3
  • 4 layers32.5 × 32.5 mmBus Isolator V3-2, the printed circuit board in 3D

    Bus Isolator V3-2

    TERA-TU-Graz/BatteryManagement_2017

    26 parts3
  • 6 layers54 × 84.5 mmCW308T to cardedge, the printed circuit board in 3D

    CW308T to cardedge

    therealdreg/abductor

    Adapter board that lets CW312-format targets run on the ChipWhisperer CW308 UFO, bridging the UFO target socket to a CW312 card-edge slot.

    7 parts3MIT
  • 2 layers100 × 100 mmBreakout, the printed circuit board in 3D

    Breakout

    UBC-Thunderbots/Electrical

    All things electrical, from radio communication to BLDC motors. Zappity zap!

    37 parts3
  • 2 layers16 × 16 mmAs5600 adapter, the printed circuit board in 3D

    As5600 adapter

    UofA-SPEAR/pcb_designs

    A place for SPEAR PCBs

    6 parts3
  • 2 layersCanbus basic, the printed circuit board in 3D

    Canbus basic

    UofA-SPEAR/pcb_designs

    A place for SPEAR PCBs

    5 parts3
  • 2 layers100 × 50 mmSpeedy breakout, the printed circuit board in 3D

    Speedy breakout

    UofA-SPEAR/pcb_designs

    A place for SPEAR PCBs

    19 parts3
  • 2 layers157.5 × 109.2 mmInterface board, the printed circuit board in 3D

    Interface board

    uvmaero/AERO-Boards-KiCad

    UVM AERO boards.

    80 parts3
  • 2 layers181.5 × 110 mmInterface board, the printed circuit board in 3D

    Interface board

    uvmaero/AERO-Boards-KiCad

    UVM AERO boards.

    81 parts3
  • 2 layers38.9 × 16.4 mmRelease serial i2c atmega328p switch, the printed circuit board in 3D

    Release serial i2c atmega328p switch

    waynepiekarski/hydro-modem

    HydroModem: Underwater Bell 103 modem implementation for low-power microcontrollers

    34 parts3GPL-3.0
  • 2 layers112 × 69 mmAdapter, the printed circuit board in 3D

    Adapter

    weiszpal/fpga-floppy

    FPGA interface board to use an IBM PC floppy disk drive as any C64 comatible FDD

    21 parts3
  • 2 layers72 × 43 mmTuner adapter, the printed circuit board in 3D

    Tuner adapter

    wh201906/RFIDetector

    Detect RFID reader field type(HF/LF)

    17 parts3CERN-OHL-S-2.0
  • 2 layers79.5 × 57.9 mmEsp cm breakout, the printed circuit board in 3D

    Esp cm breakout

    zeodotdev/zeo-boards

    ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.

    25 parts3
  • 2 layers51 × 20 mmJtag to usb, the printed circuit board in 3D

    Jtag to usb

    zeodotdev/zeo-boards

    ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.

    27 parts3
  • 2 layers9.5 × 8.9 mmUfl sma adapter, the printed circuit board in 3D

    Ufl sma adapter

    zleffke/kicad_rtl_cohere

    KiCAD projects for RTL-SDR coherency projects

    2 parts3MIT
  • 2 layers22.9 × 38.1 mmAdapter, the printed circuit board in 3D

    Adapter

    zzeneg/zzelia65

    65% keyboard with external ProMicro-compatible controller.

    2 parts3
  • 2 layers12.3 × 17.5 mmPortaRe0 HDMI adapter, the printed circuit board in 3D

    PortaRe0 HDMI adapter

    0Re0-8192/PortaRe0

    Cubie A7Z based clamshell cyberdeck

    2 parts2
  • 2 layers105.2 × 39 mmPortaRe0 USB adapter, the printed circuit board in 3D

    PortaRe0 USB adapter

    0Re0-8192/PortaRe0

    Cubie A7Z based clamshell cyberdeck

    4 parts2
  • 2 layers65 × 45 mmKnx temperature monitor, the printed circuit board in 3D

    Knx temperature monitor

    4ilo/knx-temperature-monitor

    Custom Pt100 temperature probe interface to KNX.

    42 parts2MIT