
Interfaces and adapters
7,328 boards- 2 layers13 × 24.6 mm

- 2 layers6.6 × 13.2 mm

- 2 layers15.5 × 36.6 mm

- 2 layers16.5 × 14 mm

- 2 layers36.3 × 32.4 mm

Iso9141-interface
brucemack/iso9141-interface
KiCad project for an IS0-9141 interface between a car and a micro-controller (ODB2)
19 parts11GPL-3.0 - 2 layers32.5 × 38 mm

DF56C-26S breakout board
Cinetronix/fpv-video-in-v1
KiCad hardware design for an HDMI-to-MIPI CSI bridge board, designed for FPV camera systems.
6 parts11 - 2 layers42 × 33 mm

DF56C-30S breakout board
Cinetronix/fpv-video-in-v1
KiCad hardware design for an HDMI-to-MIPI CSI bridge board, designed for FPV camera systems.
6 parts11 - 4 layers20.1 × 26.5 mm

Wi se opi4
depau/wi-se-hw
Cheap and tiny ESP8266 boards for Wi-Se to access your SBC or router serial port remotely
33 parts11 - 4 layers21.6 × 20 mm

Wi se rpi
depau/wi-se-hw
Cheap and tiny ESP8266 boards for Wi-Se to access your SBC or router serial port remotely
40 parts11 - 2 layers21.7 × 112.9 mm

Pal-2-kim adapter
eduardocasino/kim-1-programmable-memory-card
KIM-1 Programmable Memory Board for the MTU Backplane
6 parts11 - 2 layers75.1 × 111.8 mm

- 2 layers63.5 × 43.2 mm

Pcb rs485
HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
9 parts11GPL-3.0 - 2 layers86.4 × 58.4 mm

Ttl to rs485-proto
HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
5 parts11GPL-3.0 - 2 layers62.2 × 44.5 mm

Ttl to rs485-stoopid
HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
4 parts11GPL-3.0 - 2 layers10.6 × 21.8 mm

- 2 layers8 × 9 mm

- 2 layers7.5 × 9 mm

- 4 layers48 × 27 mm

Usb c breakout
kbeckmann/Kilsyth
Errata: - C9 is not a GPIO on ECP5 F12 and some other variants. To get the LED working put a jumper on pin 31 and 33 on the Wide connector. - FTCLK is not routed to a clock pin.
35 parts110BSD - 2 layers69.9 × 99.1 mm

RPi Interface
Plymouth-Sailboat/Sailboat-Meca
Mechanical documents of the sailboat - Electronic Board and 3D Parts
19 parts11GPL-3.0 - 4 layers50.8 × 50.8 mm

SparkFun GNSS UM980
sparkfun/SparkFun_UM980_Triband_GNSS_RTK_Breakout
Documentation and hardware repository for the SparkFun Triband GNSS RTK Breakout, featuring the UM980 high precision GNSS/RTK module from Unicore Communications
146 parts11 - 2 layers70.7 × 60.9 mm

BulkyModem RS-232 Adapter
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
33 parts11 - 2 layers70.7 × 43.8 mm

BulkyModem UserPort Adapter
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
27 parts11 - 2 layers208.2 × 40.9 mm

- 2 layers102 × 96 mm

Memory loader interface
TomNisbet/sap-plus
Simple As Possible (SAP) 8-bit computer with a modular PCB design
10 parts11MIT