Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers41 × 18.1 mmDB19-IDC20-Adapter, the printed circuit board in 3D

    DB19-IDC20-Adapter

    colinleroy/BurgerDisk

    A daisy-chainable Smartport hard drive for the Apple II

    4 parts20
  • 2 layers56 × 120 mmBreakout box, the printed circuit board in 3D

    Breakout box

    cycfi/nexus

    The Nexus breakout box

    47 parts20
  • 2 layers17.8 × 27.9 mmDEBUGEDGE BREAKOUT, the printed circuit board in 3D

    DEBUGEDGE BREAKOUT

    CYMOTIVE/CYMOCAN

    Low cost USB to CAN-FD (Controller Area Network - Flexible Data rate) interface.

    4 parts20
  • 2 layers92.2 × 83.8 mmKonami-2 DE10Nano adapter, the printed circuit board in 3D

    Konami-2 DE10Nano adapter

    RndMnkIII/Konami_arcade

    Hello everyone, I created this repository to share it with other people interested in preserving Konami's arcade boards in the form of core for FPGA.

    45 parts20
  • 2 layers30.5 × 16.3 mmMicrousb breakout clover, the printed circuit board in 3D

    Microusb breakout clover

    settinger/microusb_socket_panel

    A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

    33 parts20
  • 2 layers14.2 × 7.1 mmMicrousb breakout single, the printed circuit board in 3D

    Microusb breakout single

    settinger/microusb_socket_panel

    A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

    7 parts20
  • 4 layers101.6 × 53.3 mmSrx programmer, the printed circuit board in 3D

    Srx programmer

    synthtools/opensrxcard

    open source srx card + programmer

    13 parts20CERN-OHL-S-2.0
  • 2 layers16.5 × 19.5 mmHeadphone breakout, the printed circuit board in 3D

    Headphone breakout

    wntrblm/Speak_to_Me

    A beautiful stereo headphone amplifier and a delightfully lo-fi speaker

    2 parts20
  • 2 layers229 × 96 mmCommons Board, the printed circuit board in 3D

    Commons Board

    Bad-Dog-Designs/ESP32-S3-Synthesizer

    Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine

    101 parts19
  • 2 layers229 × 96 mmESP32 Engine, the printed circuit board in 3D

    ESP32 Engine

    Bad-Dog-Designs/ESP32-S3-Synthesizer

    Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine

    54 parts19
  • 2 layers229 × 96 mmRouting Board, the printed circuit board in 3D

    Routing Board

    Bad-Dog-Designs/ESP32-S3-Synthesizer

    Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine

    137 parts19
  • 2 layers19.5 × 11.5 mmDebug pogo adapter, the printed circuit board in 3D

    Debug pogo adapter

    briskspirit/Sisu_SSE-9

    Experimental six-layer LTE replacement mainboard for the Nokia 3210, built around RP2354B and Telit LE910C1-WWX.

    7 parts19Unlicense
  • 2 layers86.4 × 50 mmPiPLC HMI, the printed circuit board in 3D

    PiPLC HMI

    Chrismettal/PiPLC

    Glorified breakout board + DIN rail case for Pis

    26 parts19
  • 2 layers31.6 × 22.7 mmPiPLC HmiRiser, the printed circuit board in 3D

    PiPLC HmiRiser

    Chrismettal/PiPLC

    Glorified breakout board + DIN rail case for Pis

    2 parts19
  • 2 layers51.9 × 29.4 mmPiPLC PiRiser, the printed circuit board in 3D

    PiPLC PiRiser

    Chrismettal/PiPLC

    Glorified breakout board + DIN rail case for Pis

    2 parts19
  • 2 layers30 × 12 mmUsb programmer, the printed circuit board in 3D

    Usb programmer

    floxcap/fly2040

    Basic RP2040 board

    8 parts19MIT
  • 2 layers43.2 × 64.1 mmInterface, the printed circuit board in 3D

    Interface

    futurelink/linuxcnc-spindle-encoder

    A small AVR controller and a component to connect high precision encoder to LinuxCNC via Modbus RTU

    35 parts19GPL-3.0
  • 2 layers68.6 × 14 mmICM2 FrontPanel Breakout, the printed circuit board in 3D

    ICM2 FrontPanel Breakout

    leighleighleigh/SAAB_ICM2_LCD_RE

    Collection of schematics and resources I've collected while reverse-engineering the LCD used in SAAB 9-3 "Infotainment Control Module 2".

    7 parts19GPL-3.0
  • 2 layers55 × 12 mmDac bnc adapter, the printed circuit board in 3D

    Dac bnc adapter

    menkueclab/GPA-FHDO

    4-channel gradient power amplifier for low field MRI

    6 parts19
  • 2 layers35.6 × 26.9 mmAPB2 Breakout, the printed circuit board in 3D

    APB2 Breakout

    rancilio-pid/clevercoffee-hardware

    hardware layouts for CleverCoffee

    8 parts19
  • 2 layers145 × 10 mmBms interface, the printed circuit board in 3D

    Bms interface

    sufst/pcb

    Monorepo for all schematics and PCB designs

    13 parts19GPL-3.0
  • 2 layers64 × 57.6 mmCAN Bridge, the printed circuit board in 3D

    CAN Bridge

    sufst/pcb

    Monorepo for all schematics and PCB designs

    45 parts19GPL-3.0
  • 2 layers10.5 × 25.4 mmIcm20948-breakout, the printed circuit board in 3D

    Icm20948-breakout

    TheButlah/slimevr_pcb

    A collection of PCBs designed for SlimeVR full-body trackers

    9 parts19