Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers73.2 × 61.6 mmZX Cartridge 2021, the printed circuit board in 3D

    ZX Cartridge 2021

    tebl/ZX-Interface-2.021

    An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself.

    13 parts32
  • 2 layers73.2 × 61.6 mmZX Diagnostic 2021, the printed circuit board in 3D

    ZX Diagnostic 2021

    tebl/ZX-Interface-2.021

    An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself.

    30 parts32
  • 2 layers46.9 × 55.2 mmDexx video adapter, the printed circuit board in 3D

    Dexx video adapter

    marqs85/ossc_pro_hw

    OSSC Pro HW files

    14 parts31CERN-OHL-P-2.0
  • 2 layers43.2 × 80 mmHp breakout, the printed circuit board in 3D

    Hp breakout

    rabidaudio/synthesizer

    My custom synthesizer work

    20 parts31MIT
  • 2 layers15 × 18 mmH bridge, the printed circuit board in 3D

    H bridge

    raspberrypipress/raspberry-pi-pico-with-kicad

    Project files from Design an RP2040 board with KiCad

    10 parts31CERN-OHL-P-2.0
  • 4 layers53 × 42 mmMioLink, the printed circuit board in 3D

    MioLink

    Misaka0x2730/MioLink

    ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.

    112 parts30GPL-3.0
  • 2 layers50 × 50 mmMioLink adapter, the printed circuit board in 3D

    MioLink adapter

    Misaka0x2730/MioLink

    ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.

    13 parts30GPL-3.0
  • 4 layers53 × 54 mmMioLink Pico, the printed circuit board in 3D

    MioLink Pico

    Misaka0x2730/MioLink

    ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.

    73 parts30GPL-3.0
  • 2 layers15 × 30 mmMaskrom adapter, the printed circuit board in 3D

    Maskrom adapter

    partlyhuman/floopydrive

    The Floopy Drive, an open-source flashcart for Casio Loopy

    3 parts30MIT
  • 2 layers56.8 × 30 mmActive rpi hub75-adapter, the printed circuit board in 3D

    Active rpi hub75-adapter

    vitorleal/matrix-led-python

    🤖 Python module to control a 32x32 Matrix Led in the Raspberry Pi

    11 parts30GPL-2.0
  • 2 layers56.8 × 24.3 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    vitorleal/matrix-led-python

    🤖 Python module to control a 32x32 Matrix Led in the Raspberry Pi

    5 parts30GPL-2.0
  • 2 layers41 × 32.2 mmUsb uart, the printed circuit board in 3D

    Usb uart

    absmach/synth

    Open-source circuit compiler for engineers and AI agents

    36 parts29Apache-2.0
  • 2 layers20.5 × 11 mmSwd2usbc programmer, the printed circuit board in 3D

    Swd2usbc programmer

    alvarop/swd2usbc

    Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!

    4 parts29CC0-1.0
  • 2 layers25 × 11 mmICP-10125-breakout, the printed circuit board in 3D

    ICP-10125-breakout

    astuder/icp-101xx

    Arduino library and breakout board for the TDK InvenSense ICP-101xx barometric perssure sensors

    11 parts29BSD-2-Clause
  • 2 layersBlack magic debugger, the printed circuit board in 3D

    Black magic debugger

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    52 parts29MIT
  • 2 layersEthernet, the printed circuit board in 3D

    Ethernet

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    32 parts29MIT
  • 2 layersIsolator-24v-3v3, the printed circuit board in 3D

    Isolator-24v-3v3

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    13 parts29MIT
  • 2 layersIsolator i2c, the printed circuit board in 3D

    Isolator i2c

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    7 parts29MIT
  • 2 layersUsb uart bridge, the printed circuit board in 3D

    Usb uart bridge

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    7 parts29MIT
  • 2 layers81.3 × 104.4 mmCartridge Adapter, the printed circuit board in 3D

    Cartridge Adapter

    Domesday86/BeebSCSI

    SCSI-1 Emulator for 8-bit Acorn computers such as the BBC Master and BBC Model B

    20 parts29
  • 2 layers29.2 × 50.8 mmVFS Adapter, the printed circuit board in 3D

    VFS Adapter

    Domesday86/BeebSCSI

    SCSI-1 Emulator for 8-bit Acorn computers such as the BBC Master and BBC Model B

    10 parts29
  • 2 layers21 × 26.5 mmGj adapter, the printed circuit board in 3D

    Gj adapter

    gipi/electronics-notes

    Here I'm trying to create a header for the Mojo development board that allows to have the basic minimal peripherals for a running system:

    7 parts29