Skip to the content

Computers and single-board computers

1,525 boards
  • 4 layers94 × 43.6 mmSTLoRa Carrier Board, the printed circuit board in 3D

    STLoRa Carrier Board

    collins-emasi/KiCAD-PROJECTS-PCB

    In this repository, I will be sharing some of the project I'm working on with KiCAD software.

    28 parts1
  • 4 layers153.5 × 153.5 mmLed panel 4x5, the printed circuit board in 3D

    Led panel 4x5

    Draganito/kicad-mcp

    Mini MCP server that drives a running KiCad 10 PCB editor from Cursor over the official IPC API. LCSC/EasyEDA footprints for JLCPCB.

    232 parts1AGPL-3.0
  • 2 layers97.7 × 59.7 mmDCR MainBoard, the printed circuit board in 3D

    DCR MainBoard

    drajnauth/DCR

    Direct Conversion Receiver

    50 parts1CC0-1.0
  • 2 layers97.7 × 59.7 mmDCR MainBoard, the printed circuit board in 3D

    DCR MainBoard

    drajnauth/DCR

    Direct Conversion Receiver

    43 parts1CC0-1.0
  • 2 layersKeyboard, the printed circuit board in 3D

    Keyboard

    EfficientThings/GuavaBook

    A Big(CM4)-Little(emacsOS) based laptop

    109 parts1
  • 2 layers98.9 × 91.4 mmMicroKit09, the printed circuit board in 3D

    MicroKit09

    electrickery/MicroKit09MK2

    A recreation of an MC6809 Single Board Computer from the 1980's

    34 parts1
  • 2 layers62.2 × 49.5 mmMicroKit09Serial, the printed circuit board in 3D

    MicroKit09Serial

    electrickery/MicroKit09MK2

    A recreation of an MC6809 Single Board Computer from the 1980's

    17 parts1
  • 2 layers60 × 80 mmCarrier Board.kicad pro, the printed circuit board in 3D

    Carrier Board.kicad pro

    gamantaray-2026/Electronic-Control-System-ASV-Gamantaray-2026

    Dokumentasi teknis, skematik PCB, manajemen daya, arsitektur sistem kontrol, dan arsitektur sistem komunikasi untuk Autonomous Surface Vehicle (ASV) Gamantaray Safinah One 2026

    20 parts1MIT
  • 2 layers33 × 58.4 mmDe0raspi, the printed circuit board in 3D

    De0raspi

    Gamby-1791/H.O.D.E.

    HODE is a 16-bit transistor computer that uses a RaspberryPi for memory and IO. This project includes a simulator and requires a Linux computer (x86 or Raspberry Pi) for software building.

    28 parts1GPL-3.0
  • 2 layers63.5 × 63.5 mmIOW56Paddle, the printed circuit board in 3D

    IOW56Paddle

    Gamby-1791/H.O.D.E.

    HODE is a 16-bit transistor computer that uses a RaspberryPi for memory and IO. This project includes a simulator and requires a Linux computer (x86 or Raspberry Pi) for software building.

    37 parts1GPL-3.0
  • 4 layers63.5 × 68.6 mmMAX7317Paddle, the printed circuit board in 3D

    MAX7317Paddle

    Gamby-1791/H.O.D.E.

    HODE is a 16-bit transistor computer that uses a RaspberryPi for memory and IO. This project includes a simulator and requires a Linux computer (x86 or Raspberry Pi) for software building.

    20 parts1GPL-3.0
  • 2 layers190.5 × 25.4 mmPowerDist, the printed circuit board in 3D

    PowerDist

    Gamby-1791/H.O.D.E.

    HODE is a 16-bit transistor computer that uses a RaspberryPi for memory and IO. This project includes a simulator and requires a Linux computer (x86 or Raspberry Pi) for software building.

    11 parts1GPL-3.0
  • 4 layers85 × 96 mmZ80 romless sbc, the printed circuit board in 3D

    Z80 romless sbc

    gloveboxes/Z80ROMlessSBC

    This is a separate KiCad project for a 98.3 × 60 mm, four-layer board. JLCPCB assembles every top-side SMT part, including the Raspberry Pi Pico 2 W module, and only four parts are hand-soldered:

    34 parts1MIT
  • 2 layers95 × 45 mmLine follower mainboard, the printed circuit board in 3D

    Line follower mainboard

    GR3Y-SCALE/EGB220-A10

    General repository for CAD designs, meeting docs, planners and code

    22 parts1
  • 2 layers73.5 × 52.8 mmTyphoon Motherboard KiCad, the printed circuit board in 3D

    Typhoon Motherboard KiCad

    hpvdt/typhoon_motherboard

    Folder for each of the boards designed for a given project, even if there is only one board for a given project.

    55 parts1
  • 2 layers20 × 40 mmFramework laptop converter, the printed circuit board in 3D

    Framework laptop converter

    imnotjames/framework-laptop-projects

    The framework laptop uses the I-PEX Cabline-UM 20879-040E-01 for interacting with the eDP port - and I want to use it for things other than the framework laptop display kit.

    7 parts1MIT
  • 2 layers29 × 46 mmFramework laptop edp breakout, the printed circuit board in 3D

    Framework laptop edp breakout

    imnotjames/framework-laptop-projects

    The framework laptop uses the I-PEX Cabline-UM 20879-040E-01 for interacting with the eDP port - and I want to use it for things other than the framework laptop display kit.

    6 parts1MIT
  • 4 layers152 × 69 mmMotherboard, the printed circuit board in 3D

    Motherboard

    jacob-wigent/esp32-handheld

    Handheld game console powered by an ESP32-S3, featuring a custom LED matrix display and a variety of inputs.

    105 parts1
  • 2 layers100 × 70 mmSCAN mainboard, the printed circuit board in 3D

    SCAN mainboard

    jjsprandel/SCAN_PCB

    Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.

    58 parts1
  • 2 layers75 × 50 mmTransmitter, the printed circuit board in 3D

    Transmitter

    jpetkauskas/Hybrid-Buzzer

    Semi-wireless ESP32 Quiz Bowl Buzzers featuring custom ESP-NOW protocol, autopairing algorithm, and locally hosted management web server.

    36 parts1
  • 2 layers100 × 100 mmMainBoard-2024, the printed circuit board in 3D

    MainBoard-2024

    LesKaribous/leskaribous.github.io

    https://leskaribous.github.io/

    146 parts1MIT
  • 2 layers80 × 80 mmMainBoard PAMI-2025, the printed circuit board in 3D

    MainBoard PAMI-2025

    LesKaribous/leskaribous.github.io

    https://leskaribous.github.io/

    101 parts1MIT
  • 2 layers117.5 × 103.5 mmMotherboard Sch, the printed circuit board in 3D

    Motherboard Sch

    Masaharu41/Midi-Bass-Guitar

    A repository for all design work, assembly, and schematics for a robotic bass guitar programmed with MIDI

    74 parts1GPL-3.0