Skip to the content

Computers and single-board computers

1,525 boards
  • 2 layers177.8 × 77.5 mmMotherboard, the printed circuit board in 3D

    Motherboard

    carlosmendesjunior/rfremotelab

    RF Remote Laboratory

    26 parts2GPL-3.0
  • 2 layers98.1 × 53.9 mmSenseU Mainboard, the printed circuit board in 3D

    SenseU Mainboard

    dersian/embeddedBikeSafety

    EBS is an Embedded solution protecting a cyclist from vehicles by detecting approaching vehicles using microphones and machine learning.

    63 parts2
  • 4 layers45 × 46 mmBay card, the printed circuit board in 3D

    Bay card

    dmz006/brain-drain

    Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure

    39 parts2
  • 6 layers150 × 122 mmBrain drain, the printed circuit board in 3D

    Brain drain

    dmz006/brain-drain

    Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure

    167 parts2
  • 2 layers48 × 46 mmOpi hat, the printed circuit board in 3D

    Opi hat

    eddyem/ARMsingleboard

    Something for singleboard PC (Orange Pi Zero1/2 etc): I2C, SPI etc.

    37 parts2GPL-3.0
  • 2 layers222.3 × 127 mmMotherboard, the printed circuit board in 3D

    Motherboard

    ethanjamesauto/modular_8bit_computer

    208 parts2
  • 4 layers150 × 90 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Foosa7/koi_8x8

    The controller board for Koi 8×8. Carries a Raspberry Pi Pico (RP2040) and hosts up to 8 daughterboards in PCIe-x4 card-edge slots, addressing each board's DAC/ADC over a shared SPI bus. Formerly codenamed MOBO.

    56 parts2
  • 4 layers150 × 90 mmMotherboard bak, the printed circuit board in 3D

    Motherboard bak

    Foosa7/koi_8x8

    The controller board for Koi 8×8. Carries a Raspberry Pi Pico (RP2040) and hosts up to 8 daughterboards in PCIe-x4 card-edge slots, addressing each board's DAC/ADC over a shared SPI bus. Formerly codenamed MOBO.

    28 parts2
  • 4 layers66.2 × 14 mmPcie mini bridge host, the printed circuit board in 3D

    Pcie mini bridge host

    ihartwig/pcie-mini-bridge

    PCIe x1 bridge over USB C cable for hard to reach slots under graphics cards.

    16 parts2CC-BY-SA-4.0
  • 2 layers99.1 × 99.1 mmFilter carrier board, the printed circuit board in 3D

    Filter carrier board

    JordanAceto/angelo_modular

    modular analog synthesizer for a.p.

    52 parts2CC-BY-4.0
  • 2 layers99.1 × 99.1 mmOscillator carrier board, the printed circuit board in 3D

    Oscillator carrier board

    JordanAceto/angelo_modular

    modular analog synthesizer for a.p.

    38 parts2CC-BY-4.0
  • 8 layers14 × 9.2 mmWLMS v0 2 1-motherboard, the printed circuit board in 3D

    WLMS v0 2 1-motherboard

    miniscope/MiniscopeZero

    Miniscope Zero hardware and software

    80 parts2CERN-OHL-S-2.0
  • 2 layers20 × 64 mmThinkpad teensy keyboard, the printed circuit board in 3D

    Thinkpad teensy keyboard

    mukelarvin/thinkpad-x61-compute-module

    A motherboard replacement for the Thinkpad X61 laptop, using the Raspberry Pi Computer Module

    10 parts2
  • 4 layers38.5 × 20 mmDisplay module, the printed circuit board in 3D

    Display module

    pulseopen/PulsePhone

    An almost fully modular open source phone running off of the DART-MX8M-MINI SoM.

    14 parts2GPL-3.0
  • 2 layers24.7 × 24.4 mmP8C PROMs, the printed circuit board in 3D

    P8C PROMs

    rallepalaveev/Pravetz8A

    Motherboard for Pravetz8A with GAL

    3 parts2MIT
  • 2 layersRaspberry Pi Compute Module 4 Carrier Board, the printed circuit board in 3D

    Raspberry Pi Compute Module 4 Carrier Board

    Roshan-khatri78/Electronics-Projects-KiCad-

    A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.

    17 parts2
  • 2 layers36.6 × 44.5 mmAnalog board, the printed circuit board in 3D

    Analog board

    smartbench/mainboard

    Smartbench Project - Mainboard (KiCad)

    48 parts2
  • 2 layers86 × 54.1 mmBaseBoard, the printed circuit board in 3D

    BaseBoard

    synthkore/drivepackhw

    drivePACK's schematics and PCB

    42 parts2
  • 2 layersEchelon, the printed circuit board in 3D

    Echelon

    systemsculptor/Echelon

    Advanced RISC-V Modular Laptop

    5 parts2
  • 4 layers90 × 40 mmCm4-carrier net, the printed circuit board in 3D

    Cm4-carrier net

    Unlim8ted-Studios/unlim8ted-phone

    A custom CM4-based handheld phone project.

    27 parts2