Skip to the content

Computers and single-board computers

1,525 boards
  • 6 layers80 × 70 mmIMX6 Demo Board, the printed circuit board in 3D

    IMX6 Demo Board

    ts-manuel/iMX6-Demo-Board

    Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core

    498 parts10GPL-3.0
  • 2 layers179 × 64.3 mmJornada keyboard mainboard, the printed circuit board in 3D

    Jornada keyboard mainboard

    38911-BASIC-BYTES-FREE/USB-Jornada-keyboard-mainboard

    Jornada keyboard adapter for using it as a USB HID Keyboard. Compile it and upload in Arduino choosing Arduino Micro board. Modification of https://github.com/RasmusB/USB-Keyboard-Adapter .

    80 parts9
  • 4 layers25.4 × 38.1 mmSom, the printed circuit board in 3D

    Som

    embedconsult/quadesc

    BeagleConnect QuadESC is a four-motor power board with BeagleConnect Torque installed as its system-on-module. This repository contains the editable mainboard and module designs, schematics, firmware sources and…

    69 parts9
  • 4 layers80 × 85 mmMainboard v13, the printed circuit board in 3D

    Mainboard v13

    TIGERs-Mannheim/electronics

    TIGERs Mannheim Open-Source Electronics

    118 parts9
  • 4 layers90 × 80 mmEos cm4-base, the printed circuit board in 3D

    Eos cm4-base

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    46 parts8MIT
  • 4 layers90 × 80 mmEos cm5-base, the printed circuit board in 3D

    Eos cm5-base

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    36 parts8MIT
  • 16 layers420 × 300 mmInference servers, the printed circuit board in 3D

    Inference servers

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    637 parts8MIT
  • 6 layers67.6 × 50 mmSOM, the printed circuit board in 3D

    SOM

    fsnitz/CcSoM

    An open source system on chip based on the GateMate FPGA from Cologne Chip (Supports: CCGM1A1 & CCGM1A2)

    135 parts8
  • 2 layers92.4 × 96.6 mmLiBo BaseBoard, the printed circuit board in 3D

    LiBo BaseBoard

    ItsNotDaan/LiberBoard

    LiberBoard: An open-source, modular platform for learning electronics. Offers LiBo ARM-based PCBs and add-on boards with practical exercises and code snippets. Designed for easy learning and project creation.

    65 parts8CERN-OHL-P-2.0
  • 2 layers53.6 × 68.8 mmM.2 Arduino Module Board, the printed circuit board in 3D

    M.2 Arduino Module Board

    ItsNotDaan/LiberBoard

    LiberBoard: An open-source, modular platform for learning electronics. Offers LiBo ARM-based PCBs and add-on boards with practical exercises and code snippets. Designed for easy learning and project creation.

    23 parts8CERN-OHL-P-2.0
  • 2 layers31 × 17 mmUsbaCarrierMM8108 revC, the printed circuit board in 3D

    UsbaCarrierMM8108 revC

    JeffersonSchostakovich/halowBoards

    MM8108-based adapters in different form factors for EU availability of sub-GHz halow 802.11ah hardware - mainly for decentralised networking (Reticulum mesh) and distributed IoT experimentation purposes.

    23 parts8
  • 2 layers48.6 × 70.9 mmCarrier board, the printed circuit board in 3D

    Carrier board

    JamesTwallin/gas_sensor

    A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…

    12 parts7MIT
  • 2 layersRevision 1 - motherboard, the printed circuit board in 3D

    Revision 1 - motherboard

    MickMad/Teensy-USB-MIDI-MPC-style

    DIY USB MIDI controller MPC style - An MPC style MIDI controller featuring a 4x4 FSR matrix and based on Teensy 3.0, fully compatible with the Teensy Audio Adaptor Board

    9 parts7
  • 4 layers1.3 × 4.2 mmDifferential, the printed circuit board in 3D

    Differential

    williamyang98/oculink_m2_adapter

    Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

    5 parts7
  • 2 layers82.9 × 76.9 mmFlex pcb, the printed circuit board in 3D

    Flex pcb

    williamyang98/oculink_m2_adapter

    Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

    2 parts7
  • 4 layers42 × 22 mmM2 card, the printed circuit board in 3D

    M2 card

    williamyang98/oculink_m2_adapter

    Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

    9 parts7
  • 4 layers20.7 × 87.1 mmOculink port, the printed circuit board in 3D

    Oculink port

    williamyang98/oculink_m2_adapter

    Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

    8 parts7
  • 4 layers17.8 × 38.1 mmSbc av, the printed circuit board in 3D

    Sbc av

    dpicken/atari-hw

    Hardware for Atari 8-bit projects

    42 parts6MIT
  • 2 layers101.6 × 101.6 mmSbc case, the printed circuit board in 3D

    Sbc case

    dpicken/atari-hw

    Hardware for Atari 8-bit projects

    4 parts6MIT
  • 4 layers55.9 × 25.4 mmSbc sd, the printed circuit board in 3D

    Sbc sd

    dpicken/atari-hw

    Hardware for Atari 8-bit projects

    17 parts6MIT
  • 2 layers13 × 1.4 mmPicoPloT, the printed circuit board in 3D

    PicoPloT

    SloeComputers/PDK

    Portable Development Kit

    13 parts6MIT
  • 2 layers85.6 × 54 mmHdmizness, the printed circuit board in 3D

    Hdmizness

    Tuetuopay/hdmizness

    A business card that runs Linux, with a HDMI output

    67 parts6