Skip to the content

Computers and single-board computers

1,525 boards
  • 2 layers97.8 × 72.4 mmChihuahua, the printed circuit board in 3D

    Chihuahua

    zuiko21/chihuahua

    simple 65C02-based Single Board Computer

    40 partsMIT
  • 2 layers27.8 × 22.3 mmAudio, the printed circuit board in 3D

    Audio

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    46 parts4.3kMIT
  • 4 layers52.1 × 22.6 mmDisplay eval, the printed circuit board in 3D

    Display eval

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    12 parts4.3kMIT
  • 4 layers33.7 × 12.4 mmDisplay eval short, the printed circuit board in 3D

    Display eval short

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    4 parts4.3kMIT
  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 6 layers59.5 × 62.7 mmCM5 MINIMA 3, the printed circuit board in 3D

    CM5 MINIMA 3

    KiCad/kicad-source-mirror

    This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.

    112 parts3.1kGPL-3.0
  • 8 layers58.4 × 22.9 mmRoyalBlue54L Feather, the printed circuit board in 3D

    RoyalBlue54L Feather

    KiCad/kicad-source-mirror

    This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.

    71 parts3.1kGPL-3.0
  • 4 layers104.5 × 81 mmTinytapeout demo, the printed circuit board in 3D

    Tinytapeout demo

    KiCad/kicad-source-mirror

    This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.

    309 parts3.1kGPL-3.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers53.2 × 59.6 mmA20 OLinuXino Lime2 SHIELD TEMPLATE Rev AA, the printed circuit board in 3D

    A20 OLinuXino Lime2 SHIELD TEMPLATE Rev AA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers104 × 66 mmLCD DRIVER Rev B, the printed circuit board in 3D

    LCD DRIVER Rev B

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    141 parts1.5k
  • 2 layers104 × 66 mmLCD DRIVER Rev D, the printed circuit board in 3D

    LCD DRIVER Rev D

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    146 parts1.5k
  • 2 layers90 × 38 mmLCD OLinuXino-5TS Rev.B, the printed circuit board in 3D

    LCD OLinuXino-5TS Rev.B

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    56 parts1.5k
  • 4 layers60 × 71 mmLCD OLinuXino-15.6FHD Rev H, the printed circuit board in 3D

    LCD OLinuXino-15.6FHD Rev H

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    68 parts1.5k
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers63.3 × 15 mmSs front panel, the printed circuit board in 3D

    Ss front panel

    loopj/short-stack

    World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs

    13 parts804
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0
  • 6 layers107 × 89 mmTERES PCB1-A64-MAIN Rev.B, the printed circuit board in 3D

    TERES PCB1-A64-MAIN Rev.B

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    437 parts578Apache-2.0
  • 2 layers25.5 × 73.5 mmTERES PCB2-IO Rev.B, the printed circuit board in 3D

    TERES PCB2-IO Rev.B

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    46 parts578Apache-2.0