

Pressure sensor
PCB stuff
- Size
- 36 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 37
- Pads
- 70
- Tracks, vias
- 124, 8
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Jul 2017
- Updated
- 7 Jan 2018
Overview
Pressure sensor is an open-source printed circuit board by CambridgeAUV, from the CambridgeAUV/cauv_electronics repository on GitHub. It is a 2-layer board of 36 × 30 mm with 15 parts on 37 nets, routed with 124 tracks and 8 vias.
It is built around the STM32F042K4T6, MCP2551-I/SN and MS580314BA01-00. Its parts include 7 connectors, 3 ICs, 2 capacitors and 2 resistors. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
3STM32F042K4T6
LQFP-32(7x7)-40℃~+85℃ 1.65V~3.6V 12bit 16KB 26 32 Bit 48MHz 6KB ARM Cortex-M0 Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMS580314BA01-00
SMD-8P,6.4x6.2mm-40℃~+85℃ 1.4Mpa 1.8V~3.6V 10000pa Yes SMD-8P,6.4x6.2mm Pressure Sensors ROHSTE ConnectivityPressure Sensors
README
README.mdcauv-electronics
This is the electronics repository for our newest vehicle. This library is dependent on the Adam Greig KiCAD library. Additional components are added in the cauv_lib directory.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1M | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | SCREW_TERM | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J1, J2 |
| 1 | 100uF | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 1uF | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C2 |
| 1 | LOGO | footprints:LOGO | G*** |
| 1 | MCP2551-I/SN | SMD_Packages:SOIC-8-N | U3 |
| 1 | MS580314BA01-00 | footprints:XDCR_MS580314BA01-00 | U2 |
| 1 | S1 | agg:SIL-254P-01 | J3 |
| 1 | S2 | agg:SIL-254P-01 | J4 |
| 1 | S3 | agg:SIL-254P-01 | J5 |
| 1 | S4 | agg:SIL-254P-01 | J6 |
| 1 | STM32F042K4 | agg:LQFP-32 | U1 |
| 1 | SWD_TC | footprints:SWD_CONN | P1 |
More from CambridgeAUV/cauv_electronics
6- 2 layers144 × 88 mm

- 2 layers52 × 26 mm

- 2 layers45 × 38 mm

- 2 layers36.5 × 29 mm

- 2 layers30 × 45 mm

- 2 layers24 × 16 mm

Similar boards
- 2 layers53.9 × 43.3 mm

Welder Button
LHRIC/Welder-Button
Hardware and software for sensor button to control arc amperage of welder torch.
74 parts - 2 layers65 × 56.5 mm

Rpi odroid expansion
simpleiot/hardware
Hardware designs for IoT devices and sensor nodes.
14 parts9Apache-2.0 - 2 layers68 × 31 mm

- 4 layers83.4 × 68.5 mm

Ms3
pggood/Megasquirt-MS3-Bootloader
Bootloader to initialise MS3 if you need to replace the HCS12
82 parts7 - 2 layers109 × 95 mm

- 2 layers140 × 178.7 mm

- 2 layers256.5 × 172.9 mm

- 2 layers239.3 × 121.3 mm

Questions
How big is the Pressure sensor PCB?
It measures 36 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pressure sensor use?
15 parts, built around the STM32F042K4T6, MCP2551-I/SN and MS580314BA01-00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pressure sensor KiCad files?
From the CambridgeAUV/cauv_electronics repository on GitHub, at the commit this page was made from: the board is pressure_sensor/pressure_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pressure sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask CambridgeAUV before reusing the design.