
FMASensor Board
LHRIC/Welder-Button
Hardware and software for sensor button to control arc amperage of welder torch.

Hardware and software for sensor button to control arc amperage of welder torch.
Welder Button is an open-source printed circuit board by LHRIC, from the LHRIC/Welder-Button repository on GitHub. It is a 2-layer board of 53.9 × 43.3 mm with 74 parts on 58 nets, routed with 319 tracks and 50 vias.
It is built around the STM32F042K4T6 and V23079G2008B301. Its parts include 23 capacitors, 17 resistors, 5 ICs, 4 diodes and 3 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C6, C7, C8, C9, C10, C11, C13, C14, C16, C17, C21, C22 |
| 11 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 3 | 10k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R3, R8, R10 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C15, C23 |
| 3 | 47 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R11, R12, R13 |
| 2 | 250 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R1, R2 |
| 2 | 5.1k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R7, R9 |
| 2 | LED | LHR:LED_0603_1608Metric | D1, D2 |
| 1 | .47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 1 | 100 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R4 |
| 1 | 100k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R15 |
| 1 | 10V | Diode_SMD:D_SOD-523 | D5 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 16k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R6 |
| 1 | 1k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R14 |
| 1 | 220k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R17 |
| 1 | 220pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20 |
| 1 | 3.3uH | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | L1 |
| 1 | 30k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R16 |
| 1 | 33uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 1 | 4.2k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R5 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | Conn_02x02_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J1 |
| 1 | Conn_02x03_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J2 |
| 1 | Conn_02x04_Counter_Clockwise | Library:43045-08_00,01,02,10_ | J3 |
| 1 | LM2936-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LOGO | LHR:lain | G*** |
| 1 | LOGO | LHR:LHR_small | G*** |
| 1 | LOGO | LHR:Sawcon_small | G*** |
| 1 | MCP4726A1T-E_CH | Library:SOT95P270X145-6N | IC2 |
| 1 | NPN | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | OPA2209AIDR | Library:SOIC127P600X175-8N | IC1 |
| 1 | STM32F042K4T6 | Library:QFP80P900X900X160-32N | IC3 |
| 1 | SW_SPST | LHR:GF1233011 | SW2 |
| 1 | SW_SPST | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | SW1 |
| 1 | TPS561246DRLR | Library:SOTFL50P160X60-6N | IC4 |
| 1 | V23079G2008B301 | Library:V23079G2008B301 | K1 |
| 1 | ~ | Diode_SMD:D_SOD-123F | D4 |
The 71 most common of 74 parts.

LHRIC/Welder-Button
Hardware and software for sensor button to control arc amperage of welder torch.

simpleiot/hardware
Hardware designs for IoT devices and sensor nodes.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


KaeptnBalu/Arduino_Spot_Welder_V3
This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.
It measures 53.9 × 43.3 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the STM32F042K4T6 and V23079G2008B301. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LHRIC/Welder-Button repository on GitHub, at the commit this page was made from: the board is Hardware/Main_Board/Main_Board.kicad_pcb and its schematic Hardware/FMASensor_Board/FMASensor_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LHRIC before reusing the design.