2 layers121.3 × 52.1 mm
2 layers239.3 × 121.3 mm
Panel
ZeniteSolar/MT192Tachometer Module for CANBUS with ATmega328p
- Size
- 239.3 × 121.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 252
- Nets
- 50
- Pads
- 756
- Tracks, vias
- 1,324, 72
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 May 2019
- Updated
- 13 Jul 2024
Overview
Panel is an open-source printed circuit board by ZeniteSolar, from the ZeniteSolar/MT19 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 239.3 × 121.3 mm with 252 parts on 50 nets, routed with 1,324 tracks and 72 vias.
It is built around the ATMEGA328P-PU, MCP2551-I/SN and A1101ELHLT-T, with the LM7805, LL4148 and RJ45 among its other parts. Its parts include 72 capacitors, 48 resistors, 24 diodes, 20 ICs and 16 connectors. It belongs with the interfaces and adapters and power boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
A1101ELHLT-T
SOT-23W-40℃~+85℃ 3.8V~24V 4.1mA SOT-23W Hall Switches ROHSAllegro MicroSystems, LLCHall Sensor
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
PESD1CAN
SOT-23-65℃~+150℃ 11pF 1nA 2 200W@8/20us 24V 30.3V 3A@8/20us 70V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdMT19
Tachometer Module for CANBUS with ATmega328p
Parts
252| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C102, C102, C102, C102, C201, C201, C201, C201, C202, C202, C202, C202, C205, C205, C205, C205 +24 |
| 16 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R402, R402, R402, R403, R403, R403, R403, R404, R404, R404, R404, R405, R405, R405, R405 |
| 16 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C203, C203, C203, C204, C204, C204, C204, C403, C403, C403, C403, C404, C404, C404, C404 |
| 16 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H101, H101, H101, H102, H102, H102, H102, H103, H103, H103, H103, H104, H104, H104, H104 |
| 12 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R102, R102, R102, R102, R203, R203, R203, R203, R401, R401, R401, R401 |
| 12 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R101, R101, R101, R101, R103, R103, R103, R103, R601, R601, R601, R601 |
| 12 | LL4148 | Diode_SMD:D_MiniMELF_Handsoldering | D101, D101, D101, D101, D401, D401, D401, D401, D501, D501, D501, D501 |
| 8 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y201, Y201, Y201, Y201, Y401, Y401, Y401, Y401 |
| 8 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C501, C501, C501, C504, C504, C504, C504 |
| 8 | 4.7V | Diode_SMD:D_MiniMELF_Handsoldering | Z101, Z101, Z101, Z101, Z102, Z102, Z102, Z102 |
| 8 | LED_RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D402, D402, D402, D402, D403, D403, D403, D403 |
| 8 | RJ45 | KicadZeniteSolarLibrary18:RJ45_YH59_01 | J601, J601, J601, J601, J602, J602, J602, J602 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C101, C101, C101, C101 |
| 4 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201, R201, R201, R201 |
| 4 | 4.7n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C1, C1, C1 |
| 4 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202, R202, R202, R202 |
| 4 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501, F501, F501, F501 |
| 4 | A1101ELHL | Package_TO_SOT_SMD:SOT-23 | U301, U301, U301, U301 |
| 4 | ATMEGA328P-PU | Package_DIP:DIP-28_W7.62mm_Socket | U401, U401, U401, U401 |
| 4 | CAN_H | TestPoint:TestPoint_Pad_2.0x2.0mm | TP207, TP207, TP207, TP207 |
| 4 | CAN_L | TestPoint:TestPoint_Pad_2.0x2.0mm | TP208, TP208, TP208, TP208 |
| 4 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J1, J1, J1 |
| 4 | INT | TestPoint:TestPoint_Pad_2.0x2.0mm | TP209, TP209, TP209, TP209 |
| 4 | LM7805 | KicadZeniteSolarLibrary18:TO-220-3_Horizontal_TabDown_SMD | U501, U501, U501, U501 |
| 4 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U202, U202, U202, U202 |
| 4 | MCP2551-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U201, U201, U201, U201 |
| 4 | RXCAN | TestPoint:TestPoint_Pad_2.0x2.0mm | TP204, TP204, TP204, TP204 |
| 4 | SC | TestPoint:TestPoint_Pad_2.0x2.0mm | TP205, TP205, TP205, TP205 |
| 4 | SCK | TestPoint:TestPoint_Pad_2.0x2.0mm | TP206, TP206, TP206, TP206 |
| 4 | SI | TestPoint:TestPoint_Pad_2.0x2.0mm | TP201, TP201, TP201, TP201 |
| 4 | SO | TestPoint:TestPoint_Pad_2.0x2.0mm | TP202, TP202, TP202, TP202 |
| 4 | TXCAN | TestPoint:TestPoint_Pad_2.0x2.0mm | TP203, TP203, TP203, TP203 |
| 4 | USART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J401, J401, J401, J401 |
| 4 | pesd1can | Package_TO_SOT_SMD:SOT-23_Handsoldering | D201, D201, D201, D201 |
More from ZeniteSolar/MT19
1Similar boards
- 2 layers256.5 × 172.9 mm
- 2 layers
- 2 layers122.6 × 52.7 mm
- 2 layers248 × 174.4 mm
- 2 layers228 × 149.8 mm
MIC19
ZeniteSolar/MIC19
Módulo de Interface do Controle da embarcação solar Guarapuvu II (Zênite Solar)
300 partsGPL-3.0 - 2 layers232.1 × 131.2 mm
- 2 layers63 × 108 mm
MSC25
ZeniteSolar/MSC25
Este projeto consiste em uma placa de circuito impresso (PCB) com firmware embarcado, projetada para realizar a leitura de alta precisão de um sensor de corrente de efeito Hall e transmitir os dados através do…
61 parts - 2 layers247.1 × 121 mm
Questions
How big is the Panel PCB?
It measures 239.3 × 121.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
252 parts, built around the ATMEGA328P-PU, MCP2551-I/SN, A1101ELHLT-T and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the ZeniteSolar/MT19 repository on GitHub, at the commit this page was made from: the board is hardware/panel.kicad_pcb and its schematic hardware/atmega328p.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).