10 layers224.5 × 160 mm
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
586 parts485MIT
2 layers150 × 69 mm
Programming jig r1.0
butterstick-fpga/programming-jig6A FT232H based production programming jig for the ButterStick
- Size
- 150 × 69 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 50
- Pads
- 169
- Tracks, vias
- 395, 82
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210925)
- Created
- 27 Nov 2021
- Updated
- 27 Nov 2021
Overview
Programming jig r1.0 is an open-source printed circuit board by butterstick-fpga, from the butterstick-fpga/programming-jig repository on GitHub. It is a 2-layer board of 150 × 69 mm with 50 parts on 50 nets, routed with 395 tracks and 82 vias.
It is built around the MCP3008-I/P, FT232HQ and RC0402JR-074K7L, with the C0402C103K4RECAUTO among its other parts. Its parts include 16 capacitors, 11 connectors, 4 resistors, 2 ICs and 2 fuses.
Main components
4
MCP3008-I/P
PDIP-16-40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 61dB 8 Multiplexers SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
FT232HQ
QFN48Single Channel High Speed USB To Multipurpose UART/FIFO ICFTDIUncategorised
RC0402JR-074K7L
UncategorisedUnknown maker
C0402C103K4RECAUTO
040210nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdButterStick Programming-jig
A simple FT232H based programming jig for the ButterStick.
What is it
A simple jig made from PCBs that connects to a ButterStick with pogo-pins.
The board supports
- Programming/comms over JTAG.
- Voltage sensing via an SPI ADC connected to the FT232H's I/O pins.
Render
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | .1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 8 | Conn_01x01_Male | programming-jig:0906-4-15-20-75-14-11-0 | J6, J7, J8, J9, J10, J11, J12, J13 |
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | Ferrite_Bead_Small | Inductor_SMD:L_0402_1005Metric | FB1, FB2, FB3 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | G*** | kibuzzard-615A7324 | kibuzzard-615A7324, kibuzzard-615A7324 |
| 2 | G*** | kibuzzard-615A7371 | kibuzzard-615A7371, kibuzzard-615A7371 |
| 2 | G*** | kibuzzard-615A738C | kibuzzard-615A738C, kibuzzard-615A738C |
| 2 | Polyfuse_Small | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 12K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x02_Male | programming-jig:821-22-002-10-004101 | J5 |
| 1 | Conn_01x06_Male | programming-jig:821-22-006-10-004101 | J4 |
| 1 | FT232HQ | Package_DFN_QFN:QFN-48-1EP_8x8mm_P0.5mm_EP6.2x6.2mm | U1 |
| 1 | LOGO | logo | G*** |
| 1 | MCP3008 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Resonator | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
Similar boards
- 4 layers90 × 74 mm
VERTECS CCB A
ezrafielding/vertecs-ccb
The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core.
203 parts7CERN-OHL-P-2.0 - 2 layers38.1 × 22.9 mm
Adafruit adafruit ft232h breakout pcb adafruit ft232h original
oomlout/oomlout_oomp_project_bot_v_2
34 parts - 4 layers78 × 59 mm
- 6 layers100 × 114 mm
MTE USB HUB
MicroType-Engineering/MTE_USB_HUB
As designed on the MicroType Engineering's YouTube series: https://youtu.be/uzqXgHHZUUs
159 parts41GPL-2.0 - 4 layers55.8 × 58.4 mm
- 4 layers40 × 20 mm
Grove - Vision AI Module V2
aram-ap/daredevil
Computer Vision-Based Tactile Feedback for the Visually Impaired
114 parts3MIT - 8 layers80 × 80 mm
Questions
How big is the Programming jig r1.0 PCB?
It measures 150 × 69 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Programming jig r1.0 use?
50 parts, built around the MCP3008-I/P, FT232HQ, RC0402JR-074K7L and C0402C103K4RECAUTO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programming jig r1.0 KiCad files?
From the butterstick-fpga/programming-jig repository on GitHub, at the commit this page was made from: the board is programming-jig-r1.0/pcb-001-src/programming-jig-r1.0.kicad_pcb and its schematic programming-jig-r1.0/pcb-001-src/programming-jig-r1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programming jig r1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask butterstick-fpga before reusing the design.