

EDP Converter
V1.1 - added a external clock, routed test to ground
- Size
- 55.8 × 58.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 102
- Pads
- 300
- Tracks, vias
- 1,173, 174
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 May 2024
- Updated
- 1 Jun 2024
Overview
EDP Converter is an open-source printed circuit board by brendena, from the brendena/SN65DSI86_hat repository on GitHub. It is a 4-layer board of 55.8 × 58.4 mm with 67 parts on 102 nets, routed with 1,173 tracks and 174 vias.
It is built around the SN65DSI86IPAPRQ1, SN74LVC1G07DCKR and MCP1700T-1802E/TT(MS), with the TXB0104RGYR, RC1005J000CS and RC0402FR-07100KL among its other parts. Its parts include 39 capacitors, 14 resistors, 5 ICs, 3 connectors and 1 diode.
Main components
11SN65DSI86IPAPRQ1
HTQFP-64(10x10)-40℃~+85℃ 1.14V~1.26V 5.4Gbps 52mA I2C HTQFP-64(10x10) Interface - Specialized ROHSTexas InstrumentsInterface - SpecializedSN74LVC1G07DCKR
SOT-353-40℃~+125℃ 1 1 1.65V~5.5V 1.7V、2V 10uA 24mA 700mV、800mV 74LVC 800mV 8ns@3.3V,50pF SOT-353 Logic Gates ROHSTECH PUBLICLogic GatesMCP1700T-1802E/TT(MS)
SOT-23-40℃~+125℃@(Tj) 1 1.8V 280mV@(300mA) 2uA 300mA 5.5V Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTXB0104RGYR
VQFN-14-EP(3.5x3.5)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional Tri-State VQFN-14-EP(3.5x3.5) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersRC1005J000CS
0402-55℃~+155℃ 0Ω 50V 62.5mW Thick Film Resistor ±5% 0402 Chip Resistor - Surface Mount ROHSSamsung Electro-MechanicsChip Resistor - Surface MountRC0402FR-07100KL
UncategorisedUnknown makerRC0402JR-074K7L
UncategorisedUnknown makerRC0402JR-071KL
UncategorisedUnknown makerASCO2-27.000MHZ-EK-T3
SMD1612-4P-20℃~+70℃ 1.8V 27MHz 3.5mA CMOS SMD1612-4P Crystal Oscillators ROHSAbraconCrystal OscillatorsSFH11-PBPC-D20-ST-BK
插件,P=2.54mmFemale HeadersSullins Connector SolutionsXZMOK68W-2
SMD,1x0.5mmLED Indication - DiscreteSunLED
README
README.mddev board DSI to eDP

Changes
V1.1 - added a external clock, routed test to ground
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C10, C16, C17, C18, C19, C21, C23, C25, C27, C30, C32, C34, C36 +8 |
| 9 | 1uF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C20, C24, C29, C33, C35 |
| 6 | 0R | Resistor_SMD:R_0402_1005Metric | R1, R4, R5, R6, R7, R14 |
| 5 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C22, C26, C28, C31, C37 |
| 4 | TP | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R10, R13 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 348 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 47272-0001 | Footprints:MOLEX_47272-0001 | J1 |
| 1 | 74LVC1G07 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | ASCO | Oscillator:Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm | X1 |
| 1 | Conn_01x22_Socket | Connector_FFC-FPC:TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal | J2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | MCP1700x-120xxTT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | MCP1700x-180xxTT | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | ORANGE | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | SN65DSI86IPAPRQ1 | Footprints:ZQE64_TEX | U1 |
| 1 | TXB0104RGY | Package_DFN_QFN:Texas_S-PVQFN-N14 | U4 |
Similar boards
- 4 layers55.7 × 72.2 mm

- 4 layers78 × 59 mm

- 4 layers41.2 × 80 mm

- 4 layers70.8 × 66.5 mm

Nic2
oxidecomputer/hw-gimletlet-nic
Daughterboard for the Gimletlet 2 which uses a KSZ8463 to break out two ethernet (RJ-45) connectors. In active use for Hubris development.
53 partsMPL-2.0 - 12 layers86.4 × 54.6 mm

Beaglebone ai rev a2
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
766 parts8MIT - 4 layers80 × 80 mm

- 4 layers31.6 × 27.7 mm

Moon child
Matthew-Bon/moon_child
A rocket flight computer to support CBJAMO's amoral interests.
172 partsGPL-3.0 - 4 layers78 × 89 mm

Questions
How big is the EDP Converter PCB?
It measures 55.8 × 58.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the EDP Converter use?
67 parts, built around the SN65DSI86IPAPRQ1, SN74LVC1G07DCKR, MCP1700T-1802E/TT(MS) and TXB0104RGYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EDP Converter KiCad files?
From the brendena/SN65DSI86_hat repository on GitHub, at the commit this page was made from: the board is EDP Converter.kicad_pcb and its schematic EDP Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EDP Converter design in my own project?
Its repository states no licence, so its author keeps all rights: ask brendena before reusing the design.