

EDP Converter
- Size
- 55.7 × 72.2 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 54
- Nets
- 122
- Pads
- 326
- Tracks, vias
- 1,346, 174
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Jun 2024
- Updated
- 9 Jun 2024
Overview
EDP Converter is an open-source printed circuit board by brendena, from the brendena/SN65DSI84_hat repository on GitHub. It is a 4-layer board of 55.7 × 72.2 mm with 54 parts on 122 nets, routed with 1,346 tracks and 174 vias.
It is built around the TLV62569DBVR-TP, SN74LVC1G07DCKR and SN65DSI84TPAPRQ1, with the TXB0104RGYR, RC1005J000CS and RC0402JR-074K7L among its other parts. Its parts include 24 resistors, 18 capacitors, 6 connectors, 4 ICs and 1 inductor.
Main components
12TLV62569DBVR-TP
SOT-23-51 1.5MHz 2.7V~5.5V 2A 40uA Adjustable Buck Built-in No SOT-23-5 DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersSN74LVC1G07DCKR
SOT-353-40℃~+125℃ 1 1 1.65V~5.5V 1.7V、2V 10uA 24mA 700mV、800mV 74LVC 800mV 8ns@3.3V,50pF SOT-353 Logic Gates ROHSTECH PUBLICLogic GatesSN65DSI84TPAPRQ1
HTQFP-64(10x10)HTQFP-64(10x10) LVDS ICs ROHSTexas InstrumentsLVDS ICsTXB0104RGYR
VQFN-14-EP(3.5x3.5)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional Tri-State VQFN-14-EP(3.5x3.5) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersRC1005J000CS
0402-55℃~+155℃ 0Ω 50V 62.5mW Thick Film Resistor ±5% 0402 Chip Resistor - Surface Mount ROHSSamsung Electro-MechanicsChip Resistor - Surface MountRC0402JR-074K7L
UncategorisedUnknown makerPJ-037AH
SMD-25℃~+85℃ 24V 2mm 5A 6.5mm DC Power Jack Right Angle SMD DC Power Connectors ROHSCUIDC Power ConnectorsRC0402FR-07100KL
UncategorisedUnknown makerRC0402JR-071KL
UncategorisedUnknown makerMHCI05018-2R2M-R8A
SMD,5.7x5.4mm2.2uH 35mΩ 5A 6.5A Magnetic Shielded Inductor ±20% SMD,5.7x5.4mm Power Inductors ROHSChilisin ElectronicsPower Inductors20455-030E-76
SMD,P=0.5mm,卧贴30P Gold SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSI-PEXFFC, FPC (Flat Flexible) Connector AssembliesASCO2-27.000MHZ-EK-T3
SMD1612-4P-20℃~+70℃ 1.8V 27MHz 3.5mA CMOS SMD1612-4P Crystal Oscillators ROHSAbraconCrystal Oscillators
README
README.mdSN64DSI84_hat
This is a dev board for the pi 5 to take the DSI input and output LVDS. To do this, the board uses the SN64DSI84. This chip should be able to output most types of pinout. It has a 30 pin flat connector and a 2.0mm pitch header poinout to do to most all pinouts. There's external inputs for power for the LCD and LED if it has them.
important links
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0R | Resistor_SMD:R_0402_1005Metric | R4, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +2 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C16, C30, C32, C34, C36, C39 |
| 4 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C17, C23, C29, C31 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C15 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C14, C35, C38 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Barrel_Jack | Pattern:CUI_PJ-037AH | J1, J6 |
| 1 | 0R-DNP | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 2.2uH | Pattern:Induct | L1 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 20455-030E-76 | Pattern:IPEX_20455-030E-76 | J4 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 74LVC1G07 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | ASCO | Oscillator:Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm | X1 |
| 1 | Conn_01x22_Socket | Connector_FFC-FPC:TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal | J2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x20_P2.00mm_Vertical | J5 |
| 1 | SN65DSI84TPAPRQ1 | Pattern:QFP50P1200X1200X120-65N | IC1 |
| 1 | TLV62569DBVR | Pattern:SOT95P280X145-5N | U1 |
| 1 | TXB0104RGY | Package_DFN_QFN:Texas_S-PVQFN-N14 | U4 |
Similar boards
- 4 layers55.8 × 58.4 mm

- 6 layers52 × 43 mm

Cm4-lvds adapter
antmicro/cm4-baseboard-lvds-adapter
Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays
155 parts7Apache-2.0 - 4 layers50 × 30 mm

- 4 layers78 × 59 mm

- 4 layers80 × 80 mm

- 4 layers41.2 × 80 mm

- 4 layers31.6 × 27.7 mm

Moon child
Matthew-Bon/moon_child
A rocket flight computer to support CBJAMO's amoral interests.
172 partsGPL-3.0 - 4 layers78 × 89 mm

Questions
How big is the EDP Converter PCB?
It measures 55.7 × 72.2 mm and has 4 copper layers, 1.62 mm thick.
What parts does the EDP Converter use?
54 parts, built around the TLV62569DBVR-TP, SN74LVC1G07DCKR, SN65DSI84TPAPRQ1 and TXB0104RGYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EDP Converter KiCad files?
From the brendena/SN65DSI84_hat repository on GitHub, at the commit this page was made from: the board is EDP Converter.kicad_pcb and its schematic EDP Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EDP Converter design in my own project?
Its repository states no licence, so its author keeps all rights: ask brendena before reusing the design.