2 layers75 × 75 mm
4 layers78 × 89 mm
Zbook
VinnieT1/zbook- Size
- 78 × 89 mm
- Copper layers
- 4
- Thickness
- 1.55 mm
- Parts
- 170
- Nets
- 173
- Pads
- 637
- Tracks, vias
- 1,327, 552
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jun 2025
- Updated
- 26 Feb 2026
Overview
Zbook is an open-source printed circuit board by VinnieT1, from the VinnieT1/zbook repository on GitHub. It is a 4-layer board of 78 × 89 mm with 170 parts on 173 nets, routed with 1,327 tracks and 552 vias.
It is built around the SC0914(13), W25Q16JVSSIQ and LTR-329ALS-01, with the MSD-4-A, GSDA213 and SC-15-10J among its other parts. Its parts include 55 capacitors, 44 resistors, 9 diodes, 8 connectors and 7 ICs. It belongs with the RP2040 and RP2350 boards of this library.
Main components
12SC0914(13)
QFN-56(7x7)-40℃~+85℃@(TC) 1.8V~3.3V 12bit 133MHz 264KB 30 32 Bit ARM Cortex-M0+ Built-in+External External QFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
LTR-329ALS-01
VDFN-4-30℃~+70℃ 16bit 2.4V~3.6V 64klx I2C Light Intensity VDFN-4 Ambient Light Sensors ROHSLite-OnAmbient Light Sensors
MSD-4-A
SMDSMD SD Card / Memory Card Connector ROHSCUISD Card / Memory Card ConnectorGSDA213
LGA-12_2X2-40℃~+85℃ 1.62V~3.6V 14bit 700nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-12_2X2 Accelerometers ROHSSuzhou Good-Ark ElecAccelerometersSC-15-10J
插件-25℃~+105℃ 12mΩ 15A 1mH@100kHz 2 250V 250V 插件 Common Mode Filters ROHSKEMETCommon Mode Filters
RC0402JR-0710KL
UncategorisedUnknown makerRC0402JR-071KL
UncategorisedUnknown makerRC0402JR-074K7L
UncategorisedUnknown maker
AC0402FR-075K1L
0402-55℃~+155℃ 5.1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount
CL21A106KOQNNNG
080510uF 16V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
Parts
170| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C10, C11, C12, C13, C14, C15, C18, C20, C21, C22, C23, C24, C26, C28, C29 +19 |
| 21 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21 +5 |
| 16 | 10k | Resistor_SMD:R_0402_1005Metric | R17, R18, R20, R21, R23, R24, R25, R27, R28, R32, R35, R37, R42, R43, R45, R46 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R6, R9, R15, R16, R19, R29, R31, R34 |
| 9 | 1u | Capacitor_SMD:C_0402_1005Metric | C16, C17, C38, C43, C48, C50, C52, C53, C54 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 5 | SW_Push | peripherals1:SW_1825910-6-4 | SW1, SW2, SW3, SW4, SW5 |
| 4 | 15p | Capacitor_SMD:C_0402_1005Metric | C25, C27, C33, C34 |
| 4 | 27R | Resistor_SMD:R_0402_1005Metric | R10, R11, R13, R14 |
| 4 | 4k7 | Resistor_SMD:R_0402_1005Metric | R38, R39, R40, R41 |
| 4 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C5, C6, C19, C51 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3, R7, R8 |
| 4 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2, FID3, FID4 |
| 4 | LED_GREEN | LED_SMD:LED_0603_1608Metric | D3, D4, D5, D7 |
| 3 | 220 | Resistor_SMD:R_0402_1005Metric | R26, R33, R36 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 12MHz/10pF | microcontroller:XTAL_ABM8-272-T3 | Y1, Y2 |
| 2 | T2N7002AK,LM | Package_TO_SOT_SMD:SOT-23 | Q1, Q5 |
| 2 | USB_C_Receptacle_USB2.0_16P | power_supply:SAMESKY_UJ20-C-H-G-SMT-1-P16-TR | J1, J2 |
| 2 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U4, U5 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 2u2 | Capacitor_SMD:C_0402_1005Metric | C49 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 3u3 | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 560k | Resistor_SMD:R_0402_1005Metric | R44 |
| 1 | Buzzer | peripherals1:PS1440P02BT | BZ1 |
| 1 | CMEJ-0415-42-P | peripherals1:CMEJ-0415_CUD | MK1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | microcontroller:PogoPins | J3 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J5 |
| 1 | Conn_02x15_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x15_P2.54mm_Vertical | J6 |
| 1 | DISPLAY CONN | peripherals2:FPC_30 | J8 |
| 1 | FDN327N | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | FZ2812-5050 | peripherals1:LED_FZ2812-5050 | D6 |
| 1 | GSDA213 | peripherals2:LGA12_GAS-M | U6 |
| 1 | INL-3AHIR15 | LED_THT:LED_D3.0mm_IRBlack | D11 |
| 1 | LED_BLUE | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | LED_RED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | LED_YELLOW | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | LTR-329ALS-01 | peripherals2:LTR-329ALS-01_LTO-M | U7 |
| 1 | MSD-4-A | peripherals2:CUI_MSD-4-A | J7 |
| 1 | OP598A | peripherals1:TO-18-2 | Q3 |
| 1 | PDV-P8103 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | RV1 |
| 1 | PTV09A-4020F-B102 | peripherals1:PTV09A-4020F-B102 | RV2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias | U2 |
| 1 | RP2350 | microcontroller:QFN-80_EP_14x14_Pitch0.4mm | U3 |
| 1 | SL2301S | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | TLV78533PDBVR | power_supply:DBV0005A-IPC_B | U1 |
Similar boards
- 4 layers90 × 85 mm
ESP32 CHUNGUS RAPIDUS
robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.
98 parts1GPL-2.0 - 2 layers19.1 × 25.4 mm
MD-90SM breakout
db-electronics/MD-90SM-breakout-kicad
A simple breakout board for the MD-90SM Mini-Din 9 (Sega Genesis 2 A/V) connector
3 parts14 - 2 layers91 × 120 mm
- 4 layers49 × 80 mm
70MHz Soil Sensor
jhns-de/70MHz-Soil-Sensor
Soil moisture and electrical conductivity (EC) sensor based on 70 MHz impedance measurement, developed as part of my master’s thesis.
130 parts2 - 4 layers150 × 150 mm
- 2 layers63.5 × 78.7 mm
Project 06
lucadaloia/MSP430-LDR_ECE492
This project involved the design and manufacturing of a microcontroller-based system focused on analog signal acquisition and real-time user interaction.
61 partsMIT - 2 layers50 × 30 mm
ClockV1
TehoorMarjan/grannyclock
The GrannyClock PCB is an add-on module designed for the TFA Dostmann 60.3518.01 radio-controlled clock mechanism.
55 parts
Questions
How big is the Zbook PCB?
It measures 78 × 89 mm and has 4 copper layers, 1.55 mm thick.
What parts does the Zbook use?
170 parts, built around the SC0914(13), W25Q16JVSSIQ, LTR-329ALS-01 and MSD-4-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zbook KiCad files?
From the VinnieT1/zbook repository on GitHub, at the commit this page was made from: the board is zbook.kicad_pcb and its schematic microcontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zbook design in my own project?
Its repository states no licence, so its author keeps all rights: ask VinnieT1 before reusing the design.