2 layers124 × 112 mm
2 layers100 × 117 mm
BHV Badge
biomurph/BioVill_Badge1DEFCON Micro Fluidics Badge Design For Biohacking Village
- Size
- 100 × 117 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 270
- Nets
- 270
- Pads
- 909
- Tracks, vias
- 2,388, 189
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Feb 2018
- Updated
- 6 Mar 2019
Overview
BHV Badge is an open-source printed circuit board by biomurph, from the biomurph/BioVill_Badge repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 117 mm with 270 parts on 270 nets, routed with 2,388 tracks and 189 vias.
It is built around the MCP6002-I/P, PAM8301AAF and AQY210EH, with the HCPL0534, MAX1771ESA and MCP41010-E/P among its other parts. Its parts include 42 resistors, 36 capacitors, 16 ICs, 16 connectors and 6 diodes. It belongs with the lEDs and displays boards and the SAM D and SAM boards of this library.
Main components
10
MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
PAM8301AAF
SOT-23-6-40℃~+85℃ 1-Channel 1.5Wx1@8Ω 2.5V~5.5V 4mA 50dB 78dB 88% Class D Enable/shutdown function、Filterless architecture SOT-23-6 Audio Amplifiers ROHSDiodes IncorporatedAudio Amplifiers
AQY210EH
DIP-4-40℃~+85℃ 1.25V 1000MΩ 130mA 18Ω 350V 500us 50mA 550mW 5kV 80us AC,DC One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSPanasonicSolid State Relays (MOS Output)
HCPL0534
SOIC-8-40℃~+85℃ 1Mbit/s 2 2.5kV 2us 2us 40kV/us DC SOIC-8 Logic Output Optoisolators ROHSonsemiLogic Output Optoisolators
MAX1771ESA
SOIC812V or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC ControllerMaxim Integrated (Analog Devices)UncategorisedMCP41010-E/P
PDIP-8-40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHSMicrochip TechnologyDigital PotentiometersTLV1117-33DCY
UncategorisedTexas Instruments
ES2F
DO-214AA(SMB)Switching DiodesDIOTEC
PTS810SJK250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 16V 2.5mm 2.6N 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile SwitchesTK560P60Y
DPAKDPAK New Arrivals ROHSToshibaUncategorised
README
README.mdBioVill_Badge
DEFCON Micro Fluidics Badge Design For Biohacking Village
Features Lifted From OpenDropV2
- Arduino Micro
- HV507 64 bit high voltage SIPO
- OLED display
- Feedback circuit
- Two pushbutton switches
- Joystick
- Speaker
- Various LEDs
- Various test points
Power Supply
Most important change from OpenDrop is the power supply. This board is asking to be plugged into the mains. Super important to isolate the grounds. Pay attention.
Low voltage power supply sharing ground with USB
- 5VDC supplied by USB connection to computer or battery on Vin
- 3V3 supplied by the Arduino Micro
High voltage power supply sharing ground with high voltage input
- High voltage in to HV507
High voltate input specs
- 110VAC <> 240VAC 50Hz <> 60Hz
Parts
270| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5 | FLUXL_10_2, FLUXL_10_3, FLUXL_10_4, FLUXL_10_5, FLUXL_10_6, FLUXL_10_7, FLUXL_11_2, FLUXL_11_3, FLUXL_11_4, FLUXL_11_5, FLUXL_11_6, FLUXL_11_7, FLUXL_12_2, FLUXL_12_3, FLUXL_12_4, FLUXL_12_5 +60 |
| 24 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_top | FLUXL_3_1, FLUXL_3_8, FLUXL_4_1, FLUXL_4_8, FLUXL_5_1, FLUXL_5_8, FLUXL_10_1, FLUXL_10_8, FLUXL_11_1, FLUXL_11_8, FLUXL_12_1, FLUXL_12_8, FLUXL_13_1, FLUXL_13_8, FLUXL_14_1, FLUXL_14_8 +8 |
| 11 | 100nF | Capacitors_SMD:C_0805 | C2, C3, C12, C13, C14, C22, C26, C30, C33, C34, C36 |
| 10 | 220 | Resistors_SMD:R_0805 | R32, R34, R36, R37, R40, R41, R45, R48, R49, R51 |
| 9 | 10k | Resistors_SMD:R_0805 | R5, R10, R18, R19, R20, R21, R22, R30, R44 |
| 8 | 1uF | Capacitors_SMD:C_0805 | C7, C9, C11, C15, C16, C20, C24, C27 |
| 8 | CONN_01X01 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | P1, P3, P7, P8, P9, P10, P11, P12 |
| 8 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_side | FLUXL_2_3, FLUXL_2_4, FLUXL_2_5, FLUXL_2_6, FLUXL_15_3, FLUXL_15_4, FLUXL_15_5, FLUXL_15_6 |
| 7 | 2.2k | Resistors_SMD:R_0805 | R12, R33, R35, R38, R39, R42, R43 |
| 4 | 10R | GaudiLabsFootPrints:R_0805_HeatPad | R7, R15, R16, R17 |
| 4 | 390 | Resistors_SMD:R_0805 | R4, R6, R8, R13 |
| 4 | AQY210EH | GaudiLabsFootPrints:SMD_DIP4 | U10, U11, U12, U13 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res3 | FLUXL_1_1, FLUXL_1_8, FLUXL_16_1, FLUXL_16_8 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res5 | FLUXL_1_4b1, FLUXL_1_5b1, FLUXL_16_4b1, FLUXL_16_5b1 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res1 | FLUXL_1_2, FLUXL_1_7, FLUXL_16_2, FLUXL_16_7 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res4 | FLUXL_1_4, FLUXL_1_5, FLUXL_16_4, FLUXL_16_5 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res2 | FLUXL_1_3, FLUXL_1_6, FLUXL_16_3, FLUXL_16_6 |
| 3 | HCPL0534 | GaudiLabsFootPrints:HCPL_Optocoupler_SMD | U7, U8, U9 |
| 3 | LED | LEDs:LED-0805 | LED1, LED2, LED3 |
| 2 | 100nF, 250V | Capacitors_SMD:C_1206_HandSoldering | C6, C35 |
| 2 | 1N4148 | Diodes_SMD:D_SOD-323 | D2, D3 |
| 2 | 2.2uF | Capacitors_SMD:C_0805 | C8, C10 |
| 2 | 22pF | Capacitors_SMD:C_0805 | C23, C25 |
| 2 | 22uF | Capacitors_SMD:C_1206 | C5, C21 |
| 2 | 3.3nF | Capacitors_SMD:C_0805 | C28, C29 |
| 2 | 390k | Resistors_SMD:R_0805 | R3, R9 |
| 2 | 4u7, 250V | Capacitors_SMD:c_elec_10x10 | C4, C18 |
| 2 | 5R1 | Resistors_SMD:R_0805 | R14, R23 |
| 2 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_topleft | FLUXL_2_1, FLUXL_15_8 |
| 2 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_topright | FLUXL_2_8, FLUXL_15_1 |
| 2 | HV507 | GaudiLabsFootPrints:PQFP-80_14x20mm_Pitch0.8mm | U2, U4 |
| 2 | SW_PUSH | GaudiLabsFootPrints:PUSH_BUTTON_SMD | SW1, SW2 |
| 1 | 0R1 | Resistors_SMD:R_2010 | RSENSE1 |
| 1 | 100uF, 35V | Resistors_SMD:R_2512_HandSoldering | C1 |
| 1 | 100uF,50V | Resistors_SMD:R_2512_HandSoldering | C32 |
| 1 | 100uH | GaudiLabsFootPrints:SRN1060 | L1 |
| 1 | 15k | Resistors_SMD:R_0805 | R31 |
| 1 | 1M5 | Resistors_SMD:R_2512 | R2 |
| 1 | 1pF | Capacitors_SMD:C_0805 | C17 |
| 1 | 220nF | Capacitors_SMD:C_0805 | C31 |
| 1 | 22uF, 50V | Capacitors_SMD:c_elec_6.3x5.8 | C19 |
| 1 | 32.765 | Crystals:Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | 47k | Resistors_SMD:R_0805 | R11 |
| 1 | 6.8k | Resistors_SMD:R_0805 | R1 |
| 1 | 74xx14 | GaudiLabsFootPrints:SOIC-14_N | U16 |
| 1 | CONN_PSEUDO_AC | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | P4 |
| 1 | Conn_02x05_Odd_Even | GaudiLabsFootPrints:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J2 |
| 1 | DPDT | Solutions:OS202011MA2QS1_DPDT | SW5 |
| 1 | ES2F | GaudiLabsFootPrints:DO-214AA | D1 |
| 1 | JoystickSMD | Solutions:5P_Joystick_SKRHAAE010 | JS1 |
| 1 | LOGO | GaudiLabsLogos:GitHubCat | G*** |
| 1 | LOGO | Solutions:BHVL | G*** |
| 1 | LOGO | GaudiLabsLogos:LOGO | G*** |
| 1 | LOGO | GaudiLabsLogos:ItsASynth | G*** |
| 1 | MAX1771ESA | GaudiLabsFootPrints:SO08 | U1 |
| 1 | MCP41010 | GaudiLabsFootPrints:SO08 | U15 |
| 1 | MCP6002 | GaudiLabsFootPrints:SO08 | U6 |
| 1 | OLED_DISPLAY | GaudiLabsFootPrints:OLED_096_1_Flip | S1 |
| 1 | PAM8301 | TO_SOT_Packages_SMD:SOT-23-6 | U3 |
| 1 | PTS810_SJK_250_SMTR_LFS | OpenBCI:PTS810 | SW3 |
| 1 | SAMD21G18B-A changed from SAML21 | GaudiLabsFootPrints:TQFP-48_7x7mm_Pitch0.5mm | U5 |
| 1 | SPEAKER | GaudiLabsFootPrints:Speaker16mm | SP1 |
| 1 | ScrewPad1 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P13 |
| 1 | ScrewPad2 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P14 |
| 1 | ScrewPad3 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P15 |
| 1 | ScrewPad4 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P16 |
| 1 | ScrewPad4 | GaudiLabsFootPrints:Measurement_Point_Croki | P2 |
| 1 | TK560P60Y | GaudiLabsFootPrints:D-Pak_TO252AA | T1 |
| 1 | TLV1117-33 | GaudiLabsFootPrints:SOT-223 | U14 |
| 1 | USB_C_Receptacle | Connectors_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
The 263 most common of 270 parts.
Similar boards
- 2 layers92.3 × 109.5 mm
EWOD
JFost146/EWOD-RF-Switch-FYP
This repo is a demonstration of the work done by Jack Foster for his MEng final year project (FYP).
86 partsGPL-3.0 - 2 layers86.4 × 96.5 mm
MicroDroplet
CGrassin/microdroplet_electrowetting
µDroplet is a platform to experiment with electrowetting with an 8×8 array of electrodes.
104 parts24MIT - 2 layers51.5 × 42 mm
- 2 layers55 × 34 mm
LED Board
rassweiler/pi-networked-counter
3d printed counter using Pi5, python, pyqt6, and sqlite that can export to folders or sharepoint
14 partsGPL-3.0 - 2 layers108.8 × 157 mm
1. Mainboard
DangKhoa2210/Digital-Microfluidics
This repository contains the design files, firmware, and documentation for a Digital Microfluidic (DMF) platform, developed for research in droplet manipulation and potential applications such as on-chip PCR…
237 partsAGPL-3.0 - 4 layers77 × 83 mm
GeoMCU
NohPei/GeoMCU
Integrated Geophone Boards with programmable gain and an onboard MCU. Can be used over WiFi or wired with an external ADC.
80 parts2CERN-OHL-P-2.0 - 4 layers150 × 100 mm
Questions
How big is the BHV Badge PCB?
It measures 100 × 117 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BHV Badge use?
270 parts, built around the MCP6002-I/P, PAM8301AAF, AQY210EH and HCPL0534. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BHV Badge KiCad files?
From the biomurph/BioVill_Badge repository on GitHub, at the commit this page was made from: the board is DesignFiles/ BHV_Badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BHV Badge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).