Skip to the content
12345678

MAX1771ESA

Maxim Integrated (Analog Devices)

12V or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC Controller

Part id
maxim/MAX1771ESA
Category
Uncategorised
Package
SOIC8
Pins
8
Used on
11 open-source boards

Overview

The MAX1771ESA is an uncategorised made by Maxim Integrated (Analog Devices) in a SOIC8 package with 8 pins. 12V or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC Controller.

PCBKit's library has its KiCad symbol (Regulator_Switching:MAX1771xSA, from KiCad's library) and its footprint (Package_SO:SO-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 11 open-source boards in 5 repositories on GitHub use it.

Symbol

EXT1V+2FB3SHDN4REF5AGND6GND7CS8
Regulator_Switching:MAX1771xSAFrom KiCad's library

Footprint

12345678
Package_SO:SO-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the MAX1771ESA
PinNameType
1EXTOutput
2V+Power in
3FBInput
4SHDNInput
5REFPassive
6AGNDPower in
7GNDPower in
8CSInput

Open-source boards using it

11See all 11
  • 2 layers124 × 112 mmOpenDropV3, the printed circuit board in 3D

    OpenDropV3

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    318 parts492GPL-3.0
  • 2 layers86.4 × 96.5 mmMicroDroplet, the printed circuit board in 3D

    MicroDroplet

    CGrassin/microdroplet_electrowetting

    µDroplet is a platform to experiment with electrowetting with an 8×8 array of electrodes.

    104 parts24MIT
  • 2 layers100 × 117 mmBHV Badge, the printed circuit board in 3D

    BHV Badge

    biomurph/BioVill_Badge

    DEFCON Micro Fluidics Badge Design For Biohacking Village

    270 parts1MIT
  • 2 layers92.3 × 109.5 mmEWOD, the printed circuit board in 3D

    EWOD

    JFost146/EWOD-RF-Switch-FYP

    This repo is a demonstration of the work done by Jack Foster for his MEng final year project (FYP).

    86 partsGPL-3.0
  • 2 layers100 × 100 mmOpenDropV2, the printed circuit board in 3D

    OpenDropV2

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    232 parts492GPL-3.0
  • 2 layers124 × 115.4 mmOpenDropV4, the printed circuit board in 3D

    OpenDropV4

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    170 parts492GPL-3.0
  • 2 layers93.5 × 88.5 mmEWOD, the printed circuit board in 3D

    EWOD

    JFost146/EWOD-RF-Switch-FYP

    This repo is a demonstration of the work done by Jack Foster for his MEng final year project (FYP).

    39 partsGPL-3.0
  • 2 layers69 × 69 mmEWOD, the printed circuit board in 3D

    EWOD

    JFost146/EWOD-RF-Switch-FYP

    This repo is a demonstration of the work done by Jack Foster for his MEng final year project (FYP).

    30 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX1771ESA?

Yes. The symbol is Regulator_Switching:MAX1771xSA and the footprint Package_SO:SO-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX1771ESA?

SOIC8, with 8 pins. Its footprint is drawn on this page.

What can replace the MAX1771ESA?

Parts like it in the library: the BP2636BL by BPS, the BP85956D by BPS, the BP85958D by BPS and the BP87652 by BPS. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX1771ESA?

11 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.