2 layers100 × 100 mm
2 layers124 × 112 mm
OpenDropV3
GaudiLabs/OpenDrop492Open Source Digital Microfluidics Bio Lab
- Size
- 124 × 112 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 318
- Nets
- 276
- Pads
- 966
- Tracks, vias
- 2,641, 168
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Oct 2014
- Updated
- 1 Jul 2025
Overview
OpenDropV3 is an open-source printed circuit board by GaudiLabs, from the GaudiLabs/OpenDrop repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 124 × 112 mm with 318 parts on 276 nets, routed with 2,641 tracks and 168 vias.
It is built around the MCP6002-I/P, PAM8301AAF and AQY210EH, with the HCPL0534, MAX1771ESA and MCP41010-E/P among its other parts. Its parts include 50 resistors, 37 capacitors, 16 ICs, 16 connectors and 6 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
10
MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
PAM8301AAF
SOT-23-6-40℃~+85℃ 1-Channel 1.5Wx1@8Ω 2.5V~5.5V 4mA 50dB 78dB 88% Class D Enable/shutdown function、Filterless architecture SOT-23-6 Audio Amplifiers ROHSDiodes IncorporatedAudio Amplifiers
AQY210EH
DIP-4-40℃~+85℃ 1.25V 1000MΩ 130mA 18Ω 350V 500us 50mA 550mW 5kV 80us AC,DC One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSPanasonicSolid State Relays (MOS Output)
HCPL0534
SOIC-8-40℃~+85℃ 1Mbit/s 2 2.5kV 2us 2us 40kV/us DC SOIC-8 Logic Output Optoisolators ROHSonsemiLogic Output Optoisolators
MAX1771ESA
SOIC812V or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC ControllerMaxim Integrated (Analog Devices)UncategorisedMCP41010-E/P
PDIP-8-40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHSMicrochip TechnologyDigital PotentiometersTLV1117-33DCY
UncategorisedTexas Instruments100UF 35V 8*12白高频
CAP-TH100uF 12mm 3.5mm 3000hrs@105℃ 35V 640mA@100kHz 8mm 插件,8x12mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - Leaded
ES2F
DO-214AA(SMB)Switching DiodesDIOTECTK560P60Y
DPAKDPAK New Arrivals ROHSToshibaUncategorised
README
README.mdOpenDrop
Open Source Digital Microfluidics Bio Lab
Don't click on the files!
Click on the "Download ZIP" Button to the right. Then unpack the archive.
Open Source Digital Microfluidics Bio Lab
OpenDrop is a new design for an open source digital microfludics platform for research purposes. The device uses recent electro-wetting technology to control small droplets of liquids. Potential applications are lab on a chip devices for automating processes of digital biology. How ever the present design should also open the technology to other field and allow experimentation to find new applications. Including the field of art, music, games and education.
For more info on the open source project see:
License
OpenDrop, all design files and software are licensed under a GNU GENERAL PUBLIC LICENSE See license file in the repository.
Parts
318| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5 | FLUXL_10_2, FLUXL_10_3, FLUXL_10_4, FLUXL_10_5, FLUXL_10_6, FLUXL_10_7, FLUXL_11_2, FLUXL_11_3, FLUXL_11_4, FLUXL_11_5, FLUXL_11_6, FLUXL_11_7, FLUXL_12_2, FLUXL_12_3, FLUXL_12_4, FLUXL_12_5 +60 |
| 24 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_top | FLUXL_3_1, FLUXL_3_8, FLUXL_4_1, FLUXL_4_8, FLUXL_5_1, FLUXL_5_8, FLUXL_10_1, FLUXL_10_8, FLUXL_11_1, FLUXL_11_8, FLUXL_12_1, FLUXL_12_8, FLUXL_13_1, FLUXL_13_8, FLUXL_14_1, FLUXL_14_8 +8 |
| 11 | 100nF | Capacitors_SMD:C_0805 | C2, C3, C12, C13, C14, C22, C26, C30, C33, C34, C36 |
| 10 | 220 | Resistors_SMD:R_0805 | R32, R34, R36, R37, R40, R41, R45, R48, R49, R51 |
| 9 | 10k | Resistors_SMD:R_0805 | R5, R10, R18, R19, R20, R21, R22, R30, R44 |
| 8 | 1uF | Capacitors_SMD:C_0805 | C7, C9, C11, C15, C16, C20, C24, C27 |
| 8 | CONN_01X01 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | P1, P3, P7, P8, P9, P10, P11, P12 |
| 8 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_side | FLUXL_2_3, FLUXL_2_4, FLUXL_2_5, FLUXL_2_6, FLUXL_15_3, FLUXL_15_4, FLUXL_15_5, FLUXL_15_6 |
| 7 | 0k | Resistors_SMD:R_0805 | R14, R23, R24, R25, R26, R27, R28 |
| 6 | 2.2k | Resistors_SMD:R_0805 | R12, R33, R35, R38, R42, R43 |
| 4 | 10R | GaudiLabsFootPrints:R_0805_HeatPad | R7, R15, R16, R17 |
| 4 | 390 | Resistors_SMD:R_0805 | R4, R6, R8, R13 |
| 4 | AQY210EH | GaudiLabsFootPrints:SMD_DIP4 | U10, U11, U12, U13 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res5 | FLUXL_1_2b1, FLUXL_1_7b1, FLUXL_16_2b1, FLUXL_16_7b1 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res3 | FLUXL_1_4, FLUXL_1_5, FLUXL_16_4, FLUXL_16_5 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res2 | FLUXL_1_3, FLUXL_1_6, FLUXL_16_3, FLUXL_16_6 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res1 | FLUXL_1_1, FLUXL_1_8, FLUXL_16_1, FLUXL_16_8 |
| 4 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_res4 | FLUXL_1_2, FLUXL_1_7, FLUXL_16_2, FLUXL_16_7 |
| 3 | HCPL0534 | GaudiLabsFootPrints:HCPL_Optocoupler_SMD | U7, U8, U9 |
| 3 | LED | LEDs:LED-0805 | LED1, LED2, LED3 |
| 2 | 100nF, 250V | GaudiLabsFootPrints:C_1913 | C6, C35 |
| 2 | 1N4148 | Diodes_SMD:D_SOD-323 | D2, D3 |
| 2 | 2.2uF | Capacitors_SMD:C_0805 | C8, C10 |
| 2 | 22pF | Capacitors_SMD:C_0805 | C23, C25 |
| 2 | 22uF | Capacitors_SMD:C_1206 | C5, C21 |
| 2 | 3.3nF | Capacitors_SMD:C_0805 | C28, C29 |
| 2 | 390k | Resistors_SMD:R_0805 | R3, R9 |
| 2 | 4u7, 250V | Capacitors_SMD:c_elec_10x10 | C4, C18 |
| 2 | 5k | Resistors_SMD:R_0805 | R46, R47 |
| 2 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_topleft | FLUXL_2_1, FLUXL_15_8 |
| 2 | FX | GaudiLabsFootPrints:FLUXPAD_2_75_4MIL_4_5_topright | FLUXL_2_8, FLUXL_15_1 |
| 2 | HV507 | GaudiLabsFootPrints:PQFP-80_14x20mm_Pitch0.8mm | U2, U4 |
| 2 | SW_PUSH | GaudiLabsFootPrints:PUSH_BUTTON_SMD | SW1, SW2 |
| 1 | 0R1 | Resistors_SMD:R_2010 | RSENSE1 |
| 1 | 100uF, 35V | GaudiLabsFootPrints:C_2512_HandSoldering | C1 |
| 1 | 100uF,35V | GaudiLabsFootPrints:C_2512_HandSoldering | C32 |
| 1 | 100uH | GaudiLabsFootPrints:SRN1060 | L1 |
| 1 | 15k | Resistors_SMD:R_0805 | R31 |
| 1 | 1M5 | Resistors_SMD:R_2512 | R2 |
| 1 | 1pF | Capacitors_SMD:C_0805 | C17 |
| 1 | 220nF | Capacitors_SMD:C_0805 | C31 |
| 1 | 22uF, 50V | Capacitors_SMD:c_elec_6.3x5.8 | C19 |
| 1 | 32.765 | Crystals:Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | 470pF | Capacitors_SMD:C_0805 | C37 |
| 1 | 47k | Resistors_SMD:R_0805 | R11 |
| 1 | 5.6k | Resistors_SMD:R_0805 | R39 |
| 1 | 6.8k | Resistors_SMD:R_0805 | R1 |
| 1 | 680k? | Resistors_SMD:R_0805 | R29 |
| 1 | 74xx14 | GaudiLabsFootPrints:SOIC-14_N | U16 |
| 1 | CONN_PSEUDO_AC | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | P4 |
| 1 | Conn_02x05_Odd_Even | GaudiLabsFootPrints:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J2 |
| 1 | ES2F | GaudiLabsFootPrints:DO-214AA | D1 |
| 1 | JoystickSMD | GaudiLabsFootPrints:JoystickSMD_SKQUSeries | JS1 |
| 1 | JoystickSMD_SKRH | GaudiLabsFootPrints:SKRHABE010 | JS2 |
| 1 | LOGO | GaudiLabsLogos:ItsASynth | G*** |
| 1 | LOGO | GaudiLabsLogos:GitHubCat | G*** |
| 1 | LOGO | GaudiLabsLogos:AurynBio | G*** |
| 1 | LOGO | GaudiLabsLogos:OSHW_Logo_OpenDrop | G*** |
| 1 | LOGO | GaudiLabsLogos:FLUXL_S2 | G*** |
| 1 | LOGO | GaudiLabsLogos:GaudiLabs_12 | G*** |
| 1 | MAX1771ESA | GaudiLabsFootPrints:SO08 | U1 |
| 1 | MCP41010 | GaudiLabsFootPrints:SO08 | U15 |
| 1 | MCP6002 | GaudiLabsFootPrints:SO08 | U6 |
| 1 | OLED_DISPLAY | GaudiLabsFootPrints:OLED_096_1_Flip | S1 |
| 1 | PAM8301 | TO_SOT_Packages_SMD:SOT-23-6 | U3 |
| 1 | SAMD21G18B-A changed from SAML21 | GaudiLabsFootPrints:TQFP-48_7x7mm_Pitch0.5mm | U5 |
| 1 | SPEAKER | GaudiLabsFootPrints:Speaker16mm | SP1 |
| 1 | SPST | GaudiLabsFootPrints:Switch_On-On | SW5 |
| 1 | SW_PUSH | GaudiLabsFootPrints:SW_SPST_KMS221GLFS | SW3 |
| 1 | ScrewPad1 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P13 |
| 1 | ScrewPad2 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P14 |
| 1 | ScrewPad3 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P15 |
| 1 | ScrewPad4 | GaudiLabsFootPrints:MountingHolePad_3x9mm | P16 |
| 1 | ScrewPad4 | GaudiLabsFootPrints:Measurement_Point_Croki | P2 |
| 1 | TK560P60Y | GaudiLabsFootPrints:D-Pak_TO252AA | T1 |
| 1 | TLV1117-33 | GaudiLabsFootPrints:SOT-223 | U14 |
| 1 | USB_C_Receptacle | Connectors_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
The 275 most common of 318 parts.
More from GaudiLabs/OpenDrop
9- 2 layers124 × 115.4 mm
- 2 layers100 × 69.5 mm
- 2 layers82 × 54.5 mm
- 2 layers82 × 54.5 mm
- 2 layers100 × 70.3 mm
- 2 layers100 × 70.3 mm
- 2 layers100 × 62 mm
- 2 layers82 × 54.5 mm
Similar boards
- 2 layers100 × 117 mm
BHV Badge
biomurph/BioVill_Badge
DEFCON Micro Fluidics Badge Design For Biohacking Village
270 parts1MIT - 2 layers92.3 × 109.5 mm
EWOD
JFost146/EWOD-RF-Switch-FYP
This repo is a demonstration of the work done by Jack Foster for his MEng final year project (FYP).
86 partsGPL-3.0 - 2 layers51.5 × 42 mm
- 2 layers86.4 × 96.5 mm
MicroDroplet
CGrassin/microdroplet_electrowetting
µDroplet is a platform to experiment with electrowetting with an 8×8 array of electrodes.
104 parts24MIT - 2 layers83.8 × 56.1 mm
Hv signal generator
wheeler-microfluidics/hv-signal-generator.kicad
Control board and high-votlage signal generator for the MR Box
49 parts - 2 layers55 × 34 mm
LED Board
rassweiler/pi-networked-counter
3d printed counter using Pi5, python, pyqt6, and sqlite that can export to folders or sharepoint
14 partsGPL-3.0 - 2 layers105 × 33 mm
- 2 layers108.8 × 157 mm
1. Mainboard
DangKhoa2210/Digital-Microfluidics
This repository contains the design files, firmware, and documentation for a Digital Microfluidic (DMF) platform, developed for research in droplet manipulation and potential applications such as on-chip PCR…
237 partsAGPL-3.0
Questions
How big is the OpenDropV3 PCB?
It measures 124 × 112 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OpenDropV3 use?
318 parts, built around the MCP6002-I/P, PAM8301AAF, AQY210EH and HCPL0534. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenDropV3 KiCad files?
From the GaudiLabs/OpenDrop repository on GitHub, at the commit this page was made from: the board is OpenDropV3/Electronics/KiCad_Files/OpenDropV3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenDropV3 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).