Skip to the content
12345678

MCP41010-E/P

Microchip TechnologyExtended

-40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHS

Part id
microchip/MCP41010-E/P
Category
Digital Potentiometers
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C640349)
Used on
30 open-source boards

Overview

The MCP41010-E/P is a digital Potentiometer made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHS.

PCBKit's library has its KiCad symbol (Potentiometer_Digital:MCP41010, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C640349). 30 open-source boards in 26 repositories on GitHub use it.

Symbol

1CS2SCK3SI4VSS5PA06PW07PB08VDD
Potentiometer_Digital:MCP41010From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP41010-E/P
PinNameType
1CSInput
2SCKPassive
3SIInput
4VSSPower in
5PA0Passive
6PW0Passive
7PB0Passive
8VDDPower in

Open-source boards using it

30See all 30
  • 2 layers124 × 112 mmOpenDropV3, the printed circuit board in 3D

    OpenDropV3

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    318 parts492GPL-3.0
  • 2 layers169.3 × 128 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupply

    SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

    134 parts96
  • 2 layers50 × 100 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupplyMini

    118 parts16
  • 2 layers57.2 × 57.2 mmRocketBeaconModule, the printed circuit board in 3D

    RocketBeaconModule

    explosion33/ArmLabRadio_PCB

    KiCad files for CC1200 based 2m / 70cm radio

    96 parts4
  • 2 layers63.5 × 31.8 mmLucid, the printed circuit board in 3D

    Lucid

    breadboardbasics/Lucid

    Everything that deals with my Lucid Dreaming project

    41 parts2MIT
  • 4 layers77 × 83 mmGeoMCU, the printed circuit board in 3D

    GeoMCU

    NohPei/GeoMCU

    Integrated Geophone Boards with programmable gain and an onboard MCU. Can be used over WiFi or wired with an external ADC.

    80 parts2CERN-OHL-P-2.0
  • 2 layers100 × 117 mmBHV Badge, the printed circuit board in 3D

    BHV Badge

    biomurph/BioVill_Badge

    DEFCON Micro Fluidics Badge Design For Biohacking Village

    270 parts1MIT
  • 2 layers101.5 × 55.8 mmSilverZap, the printed circuit board in 3D

    SilverZap

    hanebuechenes/SilverZap

    Generator für kolloidales SIlber / Gold nach Dr. Beck

    40 parts1GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP41010-E/P?

Yes. The symbol is Potentiometer_Digital:MCP41010 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP41010-E/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP41010-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP41010-E/P?

JLCPCB lists it as part C640349, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MCP41010-E/P?

Parts like it in the library: the MCP4131-104E/P by Microchip Technology, the MCP4151-502E/P by Microchip Technology, the MCP4131-103E/P by Microchip Technology and the MCP4162-103E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP41010-E/P?

30 boards in 26 repositories on GitHub; the most starred are listed on this page, with their KiCad files.