2 layers57.2 × 57.2 mm
2 layers57.2 × 57.2 mm
RocketBeaconModule
explosion33/ArmLabRadio_PCB4KiCad files for CC1200 based 2m / 70cm radio
- Size
- 57.2 × 57.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 95
- Pads
- 356
- Tracks, vias
- 1,100, 129
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Oct 2022
- Updated
- 2 May 2025
Overview
RocketBeaconModule is an open-source printed circuit board by explosion33, from the explosion33/ArmLabRadio_PCB repository on GitHub. It is a 2-layer board of 57.2 × 57.2 mm with 96 parts on 95 nets, routed with 1,100 tracks and 129 vias.
It is built around the STM32F401CCU6, CC1200RHB and MCP41010-E/P, with the PT100 and TYPE-C-31-M-12 among its other parts. Its parts include 43 capacitors, 15 resistors, 8 inductors, 6 connectors and 5 ICs. It belongs with the STM32 boards of this library.
Main components
5
STM32F401CCU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 12bit 256KB 32 Bit 36 64KB 84MHz ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
CC1200RHB
VQFN-32-EP(5x5)-123dBm -40℃~+85℃ 1.25Mbps 164MHz~950MHz 16dBm 23mA 2V~3.6V 46mA 869.5MHz ISM、802.15.4 Power-on reset function、Supports RSSI function、Supports FEC function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver VQFN-32-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
MCP41010-E/P
PDIP-8-40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHSMicrochip TechnologyDigital PotentiometersPT100
--Production Auxiliary MaterialsThermostat
TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdArmLabRadio_PCB
KiCad files for CC1200 and STM32 based 2m / 70cm radio
Software
This is the hardware repo for the project, checkout
CC1200stm32 for the embedded device code
ArmLabCC1200 for Serial / I2C inteface libraries
Other
checkout
RGRadioAPI for an example use case
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 47nF | Capacitor_SMD:C_0402_1005Metric | C15, C17, C18, C19, C23, C24, C25, C28, C29 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R10, R11, R19 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C7, C8, C13 |
| 4 | 100pF | Capacitor_SMD:C_0402_1005Metric | C27, C68, C72, C73 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C10, C20, C22, C69 |
| 4 | 10pF | Capacitor_SMD:C_0402_1005Metric | C3, C6, C31, C36 |
| 4 | 5.11k | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R12 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C67, C70, C71 |
| 3 | 5.1pF | Capacitor_SMD:C_0402_1005Metric | C32, C33, C35 |
| 2 | 15nH | Capacitor_SMD:C_0402_1005Metric | L5, L6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 27nH | Capacitor_SMD:C_0402_1005Metric | L3, L4 |
| 2 | 56nH | Capacitor_SMD:C_0402_1005Metric | L1, L2 |
| 2 | GND | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | J3, J5 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D2, D3 |
| 2 | PWR | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | J2, J4 |
| 1 | 0.22 uF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 0R | Capacitor_SMD:C_0402_1005Metric | R13 |
| 1 | 1.8nF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 1000 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 18 | Capacitor_SMD:C_0402_1005Metric | R9 |
| 1 | 2.2pF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 22nH | Capacitor_SMD:C_0402_1005Metric | L7 |
| 1 | 39pF | Capacitor_SMD:C_0402_1005Metric | C30 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 40MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | 4259-63 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | PE4259-63 |
| 1 | 43nH | Inductor_SMD:L_0402_1005Metric | L16 |
| 1 | 56k | Capacitor_SMD:C_0402_1005Metric | R8 |
| 1 | 56pF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 6.2pF | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | Antenna_Shield | Connector_Coaxial:SMA_Amphenol_132134-11_Vertical | AE2 |
| 1 | CC1200 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | CP2102N-Axx-xQFN20 | CP2102:WFQFN-20 | U2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | EXT1 | Connector_FFC-FPC:Molex_200528-0080_1x08-1MP_P1.00mm_Horizontal | EX1 |
| 1 | MCP41010 | MCP41010:SOIC127P599X175-8N | U7 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | PT100 | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | PWR_LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | RA07H4047M-101 | RA07H4047m:RA07h4047M | RFAMP2 |
| 1 | RXT | LED_SMD:LED_0402_1005Metric | D5 |
| 1 | STM32F401CCU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | TXT | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | TYPE-C-31-M-12 | usbc:HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers60 × 52 mm
- 2 layers57.2 × 57.2 mm
- 4 layers65.1 × 30.2 mm
- 4 layers34.8 × 34.8 mm
- 2 layers75.2 × 95.2 mm
- 2 layers105.5 × 119 mm
Fruit sorter
nmduc9624/fruit-quality-detection-and-sorting-system
A complete personal engineering project built and validated from February to May 2026. The system combines edge computer vision, embedded firmware, custom electronics, a real conveyor and a Flutter monitoring…
21 parts - 4 layers55.9 × 55.9 mm
QUADCOPTER
Riskerx/QUADCOPTER
QuadCopter Rev B: STM32F401 four-layer flight-controller PCB, manufacturing files, hardware documentation and firmware integration plan.
103 parts
Questions
How big is the RocketBeaconModule PCB?
It measures 57.2 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RocketBeaconModule use?
96 parts, built around the STM32F401CCU6, CC1200RHB, MCP41010-E/P and PT100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RocketBeaconModule KiCad files?
From the explosion33/ArmLabRadio_PCB repository on GitHub, at the commit this page was made from: the board is rocketBeaconModule.kicad_pcb and its schematic CC1200.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RocketBeaconModule design in my own project?
Its repository states no licence, so its author keeps all rights: ask explosion33 before reusing the design.