

CC1200 Hat
CC1200 HAT - RF board
- Size
- 65.1 × 30.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 108
- Pads
- 335
- Tracks, vias
- 392, 152
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jan 2024
- Updated
- 28 May 2025
Overview
CC1200 Hat is an open-source printed circuit board by M17-Project, from the M17-Project/CC1200_HAT-hw repository on GitHub. It is a 4-layer board of 65.1 × 30.2 mm with 77 parts on 108 nets, routed with 392 tracks and 152 vias.
It is built around the STM32F411CEU6, CC1200RHB and USBLC6-2SC6, with the VJ0402V104ZXJCW1BC, CR0402AJW-101GLF and 0402B103K6R3CT among its other parts. Its parts include 34 capacitors, 17 resistors, 9 inductors, 6 diodes and 4 ICs. It belongs with the STM32 and Raspberry Pi (Linux) boards of this library.
Main components
12STM32F411CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 100MHz 128KB 12bit 32 Bit 36 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CC1200RHB
VQFN-32-EP(5x5)-123dBm -40℃~+85℃ 1.25Mbps 164MHz~950MHz 16dBm 23mA 2V~3.6V 46mA 869.5MHz ISM、802.15.4 Power-on reset function、Supports RSSI function、Supports FEC function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver VQFN-32-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)VJ0402V104ZXJCW1BC
0402-20%~+80% 100nF 16V Y5V 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSVishay IntertechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTCR0402AJW-101GLF
0402-55℃~+155℃ 100Ω 62.5mW Thick Film Resistor ±200ppm/℃ ±5% 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface Mount0402B103K6R3CT
040210nF 6.3V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTLQG15HZ15NJ02D
040215nH 2.5GHz 320mΩ 450mA 8@100MHz Multilayer inductor ±5% 0402 Inductors (SMD) ROHSMurataInductors (SMD)CRCW040210K0FKEDC
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountLQG15HN27NJ02D
04021.6GHz 27nH 300mA 670mΩ 8@100MHz Multilayer inductor ±5% 0402 Inductors (SMD) ROHSMurataInductors (SMD)LCCI0402J56NGTAR
0402Inductors (SMD)Kyocera AVXBAT60A
SOD-323Schottky DiodesSlkorAC0402JR-7W1K5L
0402Chip Resistor - Surface MountYAGEO
README
README.mdCC1200_HAT-hw
CC1200 RF Raspberry Pi Zero shield.
Board overview

Programming
See the firmware's GitHub repository for details.
40MHz TCXO
In case the FT2MNTUM-40.0-T1 40MHz crystal oscillator (X1) is not available, a valid replacement for it is TG2520SMN 40.0000M-MCGNNM0.
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 47n | Capacitor_SMD:C_0402_1005Metric | C10, C11, C15, C17, C18, C19, C20, C22, C30, C32, C33, C34 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C24, C25, C26, C35 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R18 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R7, R9 |
| 3 | 5p1 | Capacitor_SMD:C_0402_1005Metric | C3, C8, C9 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C6, C12 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C21, C23 |
| 2 | 15n | Inductor_SMD:L_0402_1005Metric | L1, L9 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric | C14, C27 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R25, R26 |
| 2 | 27n | Inductor_SMD:L_0402_1005Metric | L6, L8 |
| 2 | 56n | Inductor_SMD:L_0402_1005Metric | L4, L7 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R22, R23 |
| 2 | BAT60A | Diode_SMD:D_SOD-323 | D5, D6 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 18 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 1n5 | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 220n | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 22n | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2p2 | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 39p | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 40MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | X1 |
| 1 | 43n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 4u7 | Inductor_SMD:L_0402_1005Metric | L10 |
| 1 | 56k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 56p | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 6p2 | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | CC1200 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | PROG | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | RPi_Zero | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | PI1 |
| 1 | SMA | Connector_Coaxial:SMA_Wurth_60312002114503_Vertical | P3 |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U6 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TLV70233_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USBLC6-2 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P5 |
| 1 | blue | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | green | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | red | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | yellow | LED_SMD:LED_0402_1005Metric | D3 |
Similar boards
- 4 layers65 × 30 mm

- 4 layers202 × 125 mm

- 2 layers77.2 × 92.9 mm

- 4 layers40 × 40 mm

Tmc5160-usb
janelia-kicad/tmc5160-usb
A stepper controller and driver board combining a TMC5160 and RP2040.
103 parts - 4 layers19.2 × 42.4 mm

- 4 layers18 × 26 mm

- 4 layers56 × 20.5 mm

- 8 layers22.3 × 77.5 mm

Tinker mantis
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
279 parts1GPL-3.0
Questions
How big is the CC1200 Hat PCB?
It measures 65.1 × 30.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CC1200 Hat use?
77 parts, built around the STM32F411CEU6, CC1200RHB, USBLC6-2SC6 and VJ0402V104ZXJCW1BC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CC1200 Hat KiCad files?
From the M17-Project/CC1200_HAT-hw repository on GitHub, at the commit this page was made from: the board is KiCAD/CC1200_Hat.kicad_pcb and its schematic KiCAD/CC1200_Hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CC1200 Hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask M17-Project before reusing the design.