Skip to the content
12345678

MCP4131-103E/P

Microchip TechnologyExtended

-40℃~+125℃ 0.5LSB 1 1.8V~5.5V 10kΩ 129 1MHz 2.5uA 50ppm/℃ 75Ω Linear Power-on reset RAM SPI ±20% PDIP-8 Digital Potentiometers ROHS

Part id
microchip/MCP4131-103E/P
Category
Digital Potentiometers
Package
PDIP-8
Pins
8
In stock
7 at JLCPCB (C640353)
Used on
3 open-source boards

Overview

The MCP4131-103E/P is a digital Potentiometer made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+125℃ 0.5LSB 1 1.8V~5.5V 10kΩ 129 1MHz 2.5uA 50ppm/℃ 75Ω Linear Power-on reset RAM SPI ±20% PDIP-8 Digital Potentiometers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP4161-502E_SN, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 7 are in stock at JLCPCB (part C640353). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1CS#2SCK3SDI/SDO4VSS5P0A6P0W7P0B8VDD
EasyEDA_Cloud:MCP4161-502E_SNFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP4131-103E/P
PinNameType
1CS#Unspecified
2SCKUnspecified
3SDI/SDOUnspecified
4VSSUnspecified
5P0AUnspecified
6P0WUnspecified
7P0BUnspecified
8VDDUnspecified

Open-source boards using it

3
  • 2 layers105.6 × 72 mmSolar mppt charge controller, the printed circuit board in 3D

    Solar mppt charge controller

    Pendu1699/solar-mppt-charge-controller

    ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.

    25 parts2MIT
  • 2 layers64.8 × 41.3 mmAudioAmplifier-1, the printed circuit board in 3D

    AudioAmplifier-1

    brucemack/KC1FSZ-AudioAmplifier-1

    KiCad Project: Audio amplifier based on the LM386. Has digital potentiometer for volume control.

    26 parts
  • 2 layers129.5 × 114.3 mmV2 rampGen, the printed circuit board in 3D

    V2 rampGen

    KGAtomTrapLab/ramp_gen_pcb

    Altium files for the ramp generator PCB

    27 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP4131-103E/P?

Yes. The symbol is EasyEDA_Cloud:MCP4161-502E_SN and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP4131-103E/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP4131-103E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP4131-103E/P?

JLCPCB lists it as part C640353, with 7 in stock; the sellers' links on this page open their listings.

What can replace the MCP4131-103E/P?

Parts like it in the library: the MCP4131-104E/P by Microchip Technology, the MCP4151-502E/P by Microchip Technology, the MCP4162-103E/P by Microchip Technology and the MCP41010-E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP4131-103E/P?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.