Skip to the content
2 layers68 × 44.6 mmCat Gate Controller v1.0, the printed circuit board in 3D

Cat Gate Controller v1.0

bgmbzk/Cat-Gate-Controller-v1.0

ATmega328P based automated cat-gate controller with DRV8833 motor driver, designed in KiCad with a focus on high-current power management and noise reduction.

Size
68 × 44.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
36
Pads
83
Tracks, vias
118, 6
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Apr 2026
Updated
21 Apr 2026

Overview

Cat Gate Controller v1.0 is an open-source printed circuit board by bgmbzk, from the bgmbzk/Cat-Gate-Controller-v1.0 repository on GitHub. It is a 2-layer board of 68 × 44.6 mm with 18 parts on 36 nets, routed with 118 tracks and 6 vias.

It is built around the ATMEGA328P-AU, DRV8833PW and L7805. Its parts include 8 capacitors, 5 connectors, 3 ICs, 1 resistor and 1 crystal. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

Cat-Gate Controller v1.0 🐱🚪

Bu proje, kedilerin sesli komutlarına (veya belirli miyavlama frekanslarına) duyarlı bir şekilde çalışan, otomatik bir kedi kapısı kontrol sistemidir. Donanım tasarımı tamamen KiCad kullanılarak gerçekleştirilmiştir.

🎯 Projenin Amacı

Projenin temel amacı, evcil hayvanların eve giriş ve çıkış süreçlerini otomatize ederek hem konforu hem de güvenliği artırmaktır. Sistem, bir mikrofon sensöründen gelen verileri işleyerek DRV8833 motor sürücüsü üzerinden kapı mekanizmasını harekete geçirir.

🛠 Teknik Özellikler ve Tasarım Süreci

Bu tasarımda ATmega328P mikrodenetleyici kullanılmıştır. Tasarım süreci boyunca sadece bir devre kurmayı değil, aynı zamanda yüksek akım çeken bileşenlerin bir sistem üzerindeki etkilerini yönetmeyi öğrendik.

🚀 Kritik Tasarım Noktaları & Kazanımlar

Projede özellikle motorun elektriksel gerekliliklerini yerine getirmek adına şu teknik detaylara odaklanılmıştır:

  • Yüksek Akım ve Kalın Yollar: Motorun çalışma anında çektiği yüksek akım (inrush current) nedeniyle, güç hatlarını (VCC ve GND) standart sinyal yollarından çok daha kalın tutarak voltaj düşümlerini ve ısınmayı engelledik.
  • Gürültü Yönetimi: Motorların devreye girerken oluşturduğu elektriksel gürültünün (noise) hassas mikrodenetleyici sinyallerini bozmaması için Ground Plane (Toprak Düzlemi) stratejisi uygulanmıştır.
  • Katman Yönetimi: Kartın her iki yüzünde de (F.Cu ve B.Cu) geniş bakır alanlar oluşturularak hem gürültü kalkanı sağlanmış hem de termal rahatlama (soğutma) elde edilmiştir.

📸 Proje Görselleri

1. Devre Şematiği (Schematic)

Sistemin mantıksal bağlantılarını ve bileşenler arası iletişimi temsil eder. Schematic

2. PCB Tasarımı (Layout)

Güç yollarının kalınlığına ve gürültü kalkanına dikkat edilen baskı devre yerleşimi. PCB Layout

3. 3D Model Önizlemesi

Donanımın fiziksel olarak bitmiş halinin 3D render görüntüsü. 3D View

📁 Dosya Yapısı

  • /Production: Fabrika üretimi için gerekli olan Gerber ve Drill (.drl) dosyaları.
  • /Source: KiCad proje dosyaları (.kicad_pro, .kicad_sch, .kicad_pcb).

Bu proje, gömülü sistemler ve donanım tasarımı konusundaki öğrenim sürecinin bir parçası olarak geliştirilmiştir.

Parts

18
QtyValueFootprintReferences
3Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J4, J5
2100nFCapacitor_SMD:C_0805_2012MetricC7, C8
222pFCapacitor_SMD:C_0805_2012MetricC2, C3
110kΩResistor_SMD:R_0805_2012MetricR1
110nFCapacitor_SMD:C_0805_2012MetricC5
12.2uFCapacitor_SMD:C_0805_2012MetricC6
1ATmega328P-APackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1Barrel_JackConnector_BarrelJack:BarrelJack_HorizontalJ2
1CCapacitor_SMD:C_0805_2012MetricC4
1C_PolarizedCapacitor_SMD:CP_Elec_5x5.4C1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1CrystalCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
1DRV8833PWPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU2
1L7805Package_TO_SOT_SMD:SOT-223-3_TabPin2U3

Similar boards

  • 2 layers90 × 119 mmSkid Steer 4x4 ESP32 DRV8833 PCB, the printed circuit board in 3D

    Skid Steer 4x4 ESP32 DRV8833 PCB

    retrobuiltRyan/4x4_Rover_ESP32

    1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control

    111 parts2BSD-3-Clause
  • 4 layers138.4 × 138.3 mmGRBL board, the printed circuit board in 3D

    GRBL board

    ephemeridis/GRBL_board

    This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.

    287 parts2GPL-3.0
  • 2 layers80 × 29.5 mmMini sumo 328P, the printed circuit board in 3D

    Mini sumo 328P

    Alejojoa/MiniSumo-Gally

    Robot Mini Sumo Amateur

    43 parts1
  • 2 layers109.9 × 32.7 mmBio Data Bridge, the printed circuit board in 3D

    Bio Data Bridge

    bgmbzk/Bio-Data-Bridge-v1.0

    Bio-Data-Bridge, insan vücudundan alınan hassas biyometrik sinyalleri (EKG, EMG veya diğer analog veriler) güvenli bir şekilde işlemek ve dijital ortama aktarmak için tasarlanmış, yüksek izolasyonlu bir Biyometrik Veri…

    35 parts
  • 2 layers30.5 × 114.3 mmClockOmat, the printed circuit board in 3D

    ClockOmat

    cybaer/ClockOmat

    Clock generator for eurorack

    92 parts
  • 2 layers77.2 × 32.5 mmPPSoMatLight, the printed circuit board in 3D

    PPSoMatLight

    cybaer/PPSoMatLight

    21 parts
  • 2 layers28 × 10 mmMINI SERVER BATTERY, the printed circuit board in 3D

    MINI SERVER BATTERY

    G-Deni/Smart-Battery

    A battery standard used in all of my projects

    66 parts

Questions

How big is the Cat Gate Controller v1.0 PCB?

It measures 68 × 44.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cat Gate Controller v1.0 use?

18 parts, built around the ATMEGA328P-AU, DRV8833PW and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cat Gate Controller v1.0 KiCad files?

From the bgmbzk/Cat-Gate-Controller-v1.0 repository on GitHub, at the commit this page was made from: the board is Cat-Gate Controller v1.0.kicad_pcb and its schematic Cat-Gate Controller v1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cat Gate Controller v1.0 design in my own project?

Its repository states no licence, so its author keeps all rights: ask bgmbzk before reusing the design.