Skip to the content
12345678910111213141516

DRV8833PW

Texas InstrumentsExtended

-40℃~+85℃ 2 2.7V~10.8V 360mΩ 500mA Bipolar Driver Yes TSSOP-16 Stepper Motor Driver ROHS

Part id
ti/DRV8833PW
Category
Stepper Motor Driver
Package
TSSOP-16
Pins
16
In stock
2,078 at JLCPCB (C544801)
Used on
93 open-source boards

Overview

The DRV8833PW is a stepper Motor Driver made by Texas Instruments in a TSSOP-16 package with 16 pins. -40℃~+85℃ 2 2.7V~10.8V 360mΩ 500mA Bipolar Driver Yes TSSOP-16 Stepper Motor Driver ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8833PW, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2,078 are in stock at JLCPCB (part C544801). 93 open-source boards in 77 repositories on GitHub use it.

Symbol

1SLEEP2AOUT13AISEN4AOUT25BOUT26BISEN7BOUT18FAULT9BIN110BIN211VCP12VM13GND14VINT15AIN216AIN1
Driver_Motor:DRV8833PWFrom KiCad's library

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

Pinout

16
The pins of the DRV8833PW
PinNameType
1SLEEPInput
2AOUT1Power out
3AISENInput/output
4AOUT2Power out
5BOUT2Power out
6BISENInput/output
7BOUT1Power out
8FAULTOpen collector
9BIN1Input
10BIN2Input
11VCPInput/output
12VMPower in
13GNDPower in
14VINTPower in
15AIN2Input
16AIN1Input

Open-source boards using it

93See all 93
  • 2 layers110 × 110 mmMs pcb, the printed circuit board in 3D

    Ms pcb

    opatiny/micromouse

    Designing a custom micromouse robot.

    39 parts15CERN-OHL-P-2.0
  • 4 layers102 × 100 mmZelvicka, the printed circuit board in 3D

    Zelvicka

    RoboticsBrno/Robutek

    Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.

    214 parts12
  • 2 layers60 × 100 mmRobot boosterpack, the printed circuit board in 3D

    Robot boosterpack

    Hylian/BoosterBot

    Turn your TI LaunchPad into a robot!

    62 parts7
  • 2 layers91.9 × 67.1 mmUpdatedPCB2024, the printed circuit board in 3D

    UpdatedPCB2024

    CWRUbotix/Micromouse-2023-24

    A fully autonomous maze-solving not-quite-mouse-sized robot.

    31 parts6GPL-3.0
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6
  • 2 layers93.6 × 102.8 mmMote hardware, the printed circuit board in 3D

    Mote hardware

    empriselab/mote

    A low cost, high confidence mobile robot optimized for education.

    75 parts5MIT
  • 2 layers104.1 × 76.2 mmBiotracker tracks, the printed circuit board in 3D

    Biotracker tracks

    interspecifics/ComunicacionesEspeculativas

    Es un proyecto basado en una máquina que es capaz de observar y aprender de microorganismos para crear un score audiovisual a partir de los patrones que encuentre en su comportamiento.

    16 parts4
  • 2 layers71.5 × 48.3 mmEsp32-2wd, the printed circuit board in 3D

    Esp32-2wd

    nochkin/esp-line-follower

    A simple educational project to build a line following 2WD robot

    13 parts3MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DRV8833PW?

Yes. The symbol is Driver_Motor:DRV8833PW and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8833PW?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the DRV8833PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8833PW?

JLCPCB lists it as part C544801, with 2,078 in stock; the sellers' links on this page open their listings.

What can replace the DRV8833PW?

Parts like it in the library: the DRV8860PWPR by Texas Instruments, the DRV8860PW by Texas Instruments, the TC78H621FNG,EL by Toshiba and the DRV8847SPW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8833PW?

93 boards in 77 repositories on GitHub; the most starred are listed on this page, with their KiCad files.