Skip to the content
2 layers100 × 100 mmG2-Control, the printed circuit board in 3D

The Tetrode Boards by Ian White, GM3SEK. Redesigned with KiCad.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
93
Nets
67
Pads
249
Tracks, vias
640, 9
Pours
13
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Apr 2024
Updated
5 Feb 2026

Overview

G2-Control is an open-source printed circuit board by bernerus, from the bernerus/TetrodeBoards repository on GitHub. It is a 2-layer board of 100 × 100 mm with 93 parts on 67 nets, routed with 640 tracks and 9 vias.

It is built around the 78L05, LMC555CMX and 1N4148WS, with the BZX55C15V, V320LA40BP and 1N5337B among its other parts. Its parts include 26 resistors, 17 capacitors, 17 diodes, 7 connectors and 5 ICs.

Main components

11

README

README.md

TetrodeBoards

The Tetrode Boards by Ian White, GM3SEK. Redesigned with KiCad.

In 1998 Ian White, G3SEK, nowadays GM3SEK designed control and protection circuits for RF power amplifiers that use tube tetrodes. These boards were sold for many years by the designer but were retired around 2017 and are no longer available.

The manuals are still available however, and that documantation is excellent.

After my retirement as a system developer I found time to return to the VHF DXing that I used to do as a student in the late 1970's. By then one of the things I built was a VHF power amplifier, described by Fred Merry, W2GN, which was used even for some EME contacts until around 1987 when a storm took my antenna. Since then, the amplifier was only used occasionally.

Now, 37 years later, the ham world has changed quite a lot. Nowadays computers make the waveforms and almost every ham has a spectrum analyzer built into their radio. My signals from the old PA didn't look very good there.

Actually it is probaly at miracle that the PA and its power supply worked at all now. There were lots of electrolytic capacitors in the power supply that were surplus already in the mid 1970's, and when I got reports on hum on my signal, I checked these caps. I had only about 8 uF left and the G1 and G2 voltage varied too much to be happy with.

That's when I found out that these tetrode boards could help, but since the boards were no longer sold, I decided to try to re-engineer them using KiCad. This time using methods available today. Thus this design uses SMD mounted components and professionally produced boards. I have some boards left, so anyone who likes to try building on these boards can have them for the expense of postage. Beware though that they have issues. Check the issues tab at GitHub first.

A crucial component in Ian's design is the 748 op amp. These are no longer manufactured, but they are available at eBay. Luckily for me, I found a few 748 IC:s leftover from the happy '70s in my old junkbox.

Christer Bernérus, SM6FBQ. JO67BQ 2024-04-04.

Parts

93
QtyValueFootprintReferences
81N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD9, D10, D12, D13, D14, D15, D16, D17
710kResistor_SMD:R_1206_3216MetricR22, R23, R24, R25, R26, R27, R29
5100nCapacitor_SMD:C_1206_3216MetricC3, C7, C13, C14, C16
5MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4, H5
41N4148WSDiode_SMD:D_SOD-323D3, D4, D5, D11
3Conn_01x06_PinConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_6-G-5,08_1x06_P5.08mm_VerticalJ1, J102, J103
2100u 16VCapacitor_SMD:CP_Elec_6.3x5.7C1, C15
222kResistor_SMD:R_1206_3216MetricR6, R7
233pCapacitor_SMD:C_0805_2012MetricC5, C6
2AZ822-2C-24DSERelay_THT:Relay_DPDT_Omron_G5V-2K2, K3
2BZX55C15VDiode_THT:D_DO-201_P5.08mm_Vertical_KathodeUpD1, D2
2V320LA40B*Varistor:RV_Disc_D21.5mm_W6.1mm_P7.5mmVDR1, VDR2
1100kResistor_SMD:R_1206_3216MetricR20
1100n 1kVCapacitor_THT:C_Rect_L24.0mm_W12.2mm_P22.50mm_MKTC9
1100u 50V*Capacitor_THT:CP_Radial_D8.0mm_P3.50mmC17
110kPotentiometer_THT:Potentiometer_Bourns_3386P_VerticalRV1
110k 2W*Resistor_THT:R_Axial_Power_L20.0mm_W6.4mm_P7.62mm_VerticalR13
110nCapacitor_SMD:C_0805_2012MetricC4
110n 1kVCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mmC10
110uCapacitor_SMD:C_1206_3216MetricC12
110u 50VCapacitor_SMD:CP_Elec_5x5.4C2
1120R 1W*Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_VerticalR15
1150k 1W*Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_VerticalR10
11N5337BDiode_THT:D_DO-201_P5.08mm_Vertical_KathodeUpD8
1220RResistor_SMD:R_1206_3216MetricR18
1270RResistor_SMD:R_1206_3216MetricR1
127k*Resistor_SMD:R_1206_3216MetricR9
12N4403Package_TO_SOT_THT:TO-92_Inline_WideQ4
12N5061Project_library:TO-92S_WideQ3
12W06Diode_THT:Diode_Bridge_Round_D9.0mmBR1
12k7Resistor_SMD:R_1206_3216MetricR5
1330k*Resistor_SMD:R_1206_3216MetricR19
139kResistor_SMD:R_1206_3216MetricR4
1470RResistor_SMD:R_1206_3216MetricR3
1470R 1WResistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_VerticalR21
1470k 1WResistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_VerticalR8
1470nCapacitor_SMD:C_0805_2012MetricC11
14N36Project_library:SOP-6_6.62x6.62mm_P2.54mmU3
14k7Resistor_SMD:R_1206_3216MetricR2
14n7 630VCapacitor_THT:C_Axial_L17.0mm_D6.5mm_P20.00mm_HorizontalC8
1500RPotentiometer_THT:Potentiometer_Bourns_3386P_VerticalRV2
1680 1W*Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_VerticalR28
178L05Package_TO_SOT_SMD:SOT-89-3U4
1820R*Resistor_SMD:R_1206_3216MetricR16
182kResistor_SMD:R_1206_3216MetricR11
1BC847Package_TO_SOT_SMD:SOT-23Q5
1BZT03C82Diode_THT:D_DO-201_P5.08mm_Vertical_KathodeUpD7
1BZX55C12VDiode_THT:D_DO-201_P5.08mm_Vertical_KathodeUpD6
1Board InterconnectConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_6-G-5,08_1x06_P5.08mm_VerticalJ104
1Conn_01x05_PinConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_VerticalJ4
1Conn_01x07_PinConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_7-G-5,08_1x07_P5.08mm_VerticalJ3
1Heatsink_Pad_2PinProject_library:6025DG_CoolerHS301
1IRF9530NPackage_TO_SOT_THT:TO-220-3_VerticalQ6
1Jumper_2_BridgedResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_HorizontalLK3
1LM317L_SOT89Package_TO_SOT_SMD:SOT-89-3U1
1LMC555CMXPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1Q2_linkConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_VerticalJ2
1Relay voltageConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP101
1Schrack RTE24024Relay_THT:Relay_DPDT_Schrack-RT2-FormC_RM5mmK1
1TIP122Package_TO_SOT_THT:TO-220-3_VerticalQ1
1uA748Package_DIP:DIP-8_W7.62mm_SocketU2

More from bernerus/TetrodeBoards

1
  • 2 layers100 × 100.1 mmG1-ALC, the printed circuit board in 3D

    G1-ALC

    bernerus/TetrodeBoards

    The Tetrode Boards by Ian White, GM3SEK. Redesigned with KiCad.

    96 parts

Similar boards

  • 2 layers64.8 × 76.2 mmController, the printed circuit board in 3D

    Controller

    domergan/drsstc

    My repo containing all my files and codes for my DRSSTC project.

    73 parts
  • 2 layersEstop, the printed circuit board in 3D

    Estop

    SoonerRobotics/igvc_hardware_2020

    Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

    28 parts2
  • 4 layers41.4 × 108 mmMesh3310, the printed circuit board in 3D

    Mesh3310

    JLTelectronics/The-Mesh3310-Project

    Make the worlds strongest Node

    223 parts26MIT
  • 2 layers51.5 × 76.5 mmEsp rfm, the printed circuit board in 3D

    Esp rfm

    Phunkafizer/RFM-gateway

    Hard- and software for the RFM-gateway, a universal platform for integrating sub-GHz radio into your WiFi network

    47 parts1MIT
  • 4 layers190 × 135 mmAudio DSP, the printed circuit board in 3D

    Audio DSP

    HeinVerhallen/Audio-DSP

    545 parts
  • 2 layers122 × 87.4 mmGETWAY, the printed circuit board in 3D

    GETWAY

    maivananh111/GETWAY_PCB

    264 parts

Questions

How big is the G2-Control PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the G2-Control use?

93 parts, built around the 78L05, LMC555CMX, 1N4148WS and BZX55C15V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the G2-Control KiCad files?

From the bernerus/TetrodeBoards repository on GitHub, at the commit this page was made from: the board is G2-Control.kicad_pcb and its schematic G1-ALC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the G2-Control design in my own project?

Its repository states no licence, so its author keeps all rights: ask bernerus before reusing the design.