2 layers96.8 × 101.5 mm
PLL SSTC
Pranav2008-droid/PLL-SSTC
This is a Phase locked loop Solit State Tesla Coil that I'm designing including the schematics and the pcb design.
96 parts
2 layers64.8 × 76.2 mm
Controller
domergan/drsstcMy repo containing all my files and codes for my DRSSTC project.
- Size
- 64.8 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 47
- Pads
- 206
- Tracks, vias
- 286, 86
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Sep 2026
- Updated
- 12 Sep 2026
Overview
Controller is an open-source printed circuit board by domergan, from the domergan/drsstc repository on GitHub. It is a 2-layer board of 64.8 × 76.2 mm with 73 parts on 47 nets, routed with 286 tracks and 86 vias.
It is built around the UCC27523D, 74HC08D and 74HC14, with the 74HC74D, LM311 and 1N5337B among its other parts. Its parts include 21 capacitors, 17 diodes, 13 resistors, 8 ICs and 5 connectors.
Main components
8
UCC27523D
SOIC-8-40℃~+140℃ 1.9V~2.3V 1V~1.4V 2 4.5V~18V 5A 5A 7ns 9ns IGBT、MOSFET Low Side Under Voltage Protection SOIC-8 Gate Drivers ROHSTexas InstrumentsGate Drivers
74HC08D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV 2 27ns@4.5V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops
LM311
SOP-80℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSGcoreComparators
1N5337B
DO-15-55℃~+150℃ 1 Independent 2Ω 4.465V~4.935V 4.7V 450Ω 5W 5uA ±5% DO-27(DO-201AD) Zener Diodes ROHSLGEZener DiodesFDS4559
SOP-8-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.2V 25nC@10V、26nC@10V 25pF、110pF 2W 30mΩ@10V、88mΩ@10V 500pF、1.45nF 5A、6A 60V 60pF、145pF N-Channel + P-Channel SOP-8 MOSFETs ROHSTECH PUBLICMOSFETs
TB210S
ABS-55℃~+150℃ 100V 2A 300uA@100V 40A 850mV@2A Single-Phase Rectifier ABS Bridge Rectifiers ROHSShandong Jingdao MicroelectronicsBridge Rectifiers
README
README.mdDual Resonance SSTC
My repo containing all my files and codes for my DRSSTC project.
Sources
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R6, R7, R8, R9, R11, R12 |
| 6 | 1N5819 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_CathodeUp | D1, D4, D7, D8, D9, D10 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C8, C9, C20 |
| 5 | 1N4148 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_CathodeUp | D5, D6, D12, D13, D15 |
| 5 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11, C16, C17, C18 |
| 5 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2, J3, J4, J5 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C7, C21 |
| 4 | M3 / 3.2mm NPTH | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C13, C14, C15 |
| 3 | LED | LED_THT:LED_D3.0mm | D11, D16, D17 |
| 2 | 10R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R10 |
| 2 | 1N5337B | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D18, D19 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C19 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R13 |
| 2 | FDS4559 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP3 |
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C12 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 22n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 74HC08 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 74HC74 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | LM311 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U8 |
| 1 | LM7809_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM7824_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U10 |
| 1 | TB210S | Controller:TB210S_ABS | D14 |
| 1 | UCC27523D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
Similar boards
- 2 layers97.5 × 97.5 mm
Ud27c
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
106 parts59 - 2 layers100 × 100 mm
G2-Control
bernerus/TetrodeBoards
The Tetrode Boards by Ian White, GM3SEK. Redesigned with KiCad.
93 parts - 2 layers216 × 150 mm
Motherboard-101
artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer
124 parts67 - 2 layers92 × 90 mm
- 2 layers147.3 × 94 mm
Spielmodul
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
234 parts5BSD-2-Clause - 2 layers100 × 80 mm
- 2 layers100 × 87.5 mm
Questions
How big is the Controller PCB?
It measures 64.8 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
73 parts, built around the UCC27523D, 74HC08D, 74HC14 and 74HC74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the domergan/drsstc repository on GitHub, at the commit this page was made from: the board is kicad/controller/controller.kicad_pcb and its schematic kicad/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask domergan before reusing the design.