2 layers230 × 63 mm
2 layers92 × 90 mm
Motor driver tpc8408-panel-2x4
daisuke-ym/motor-driver- Size
- 92 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 202
- Nets
- 16
- Pads
- 578
- Tracks, vias
- 816, 448
- Pours
- 80
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jun 2024
- Updated
- 25 Apr 2026
Overview
Motor driver tpc8408-panel-2x4 is an open-source printed circuit board by daisuke-ym, from the daisuke-ym/motor-driver repository on GitHub. It is a 2-layer board of 92 × 90 mm with 202 parts on 16 nets, routed with 816 tracks and 448 vias.
It is built around the FDS4559 and 74HC00D. Its parts include 64 resistors, 24 ICs, 8 capacitors and 8 connectors. It belongs with the robots and motor control boards of this library.
Main components
2
FDS4559
SOP-8-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.2V 25nC@10V、26nC@10V 25pF、110pF 2W 30mΩ@10V、88mΩ@10V 500pF、1.45nF 5A、6A 60V 60pF、145pF N-Channel + P-Channel SOP-8 MOSFETs ROHSTECH PUBLICMOSFETs
74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
Parts
202| Qty | Value | Footprint | References |
|---|---|---|---|
| 96 | CuttingHole_0.8 | MyLib:CuttingHole_0.8 | CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH**, CH** +80 |
| 32 | 20 | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R2, R2 +16 |
| 32 | 2k2 | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3, R3, R3, R3, R3, R4, R4, R4, R4, R4, R4, R4, R4 +16 |
| 16 | FDS4559 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U1, U1, U1, U1, U1, U1, U1, U2, U2, U2, U2, U2, U2, U2, U2 |
| 8 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C1, C1 |
| 8 | 74HC00 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3, U3, U3, U3, U3, U3, U3, U3 |
| 8 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Horizontal | J1, J1, J1, J1, J1, J1, J1, J1 |
The 200 most common of 202 parts.
More from daisuke-ym/motor-driver
12- 2 layers142 × 134 mm
- 2 layers142 × 134 mm
- 2 layers230 × 63 mm
- 2 layers153 × 58 mm
- 2 layers80 × 74 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers72 × 54 mm
- 2 layers140 × 40 mm
- 2 layers72 × 54 mm
- 2 layers80 × 78 mm
Similar boards
- 2 layers64.8 × 76.2 mm
- 2 layers96.8 × 101.5 mm
PLL SSTC
Pranav2008-droid/PLL-SSTC
This is a Phase locked loop Solit State Tesla Coil that I'm designing including the schematics and the pcb design.
96 parts - 2 layers245.1 × 160 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers191.8 × 121.3 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 2 layers203.2 × 149.9 mm
- 2 layers99.1 × 88.9 mm
1002 EPROM EMU NG 2.2d
Kris-Sekula/EPROM-EMU-NG
EPROM Emulator Project with Arduino
49 parts161Apache-2.0 - 4 layers120 × 98 mm
- 2 layers99.1 × 99.1 mm
BE6502 SBC
tebl/BE6502-Build-a-65c02-computer
A PCB being made while watching Ben Eaters "Build a 6502 computer" video series. Includes the computer itself, a standalone slow clock and an Arduino Mega shield for the bus monitor sketch..
61 parts129
Questions
How big is the Motor driver tpc8408-panel-2x4 PCB?
It measures 92 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor driver tpc8408-panel-2x4 use?
202 parts, built around the FDS4559 and 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor driver tpc8408-panel-2x4 KiCad files?
From the daisuke-ym/motor-driver repository on GitHub, at the commit this page was made from: the board is pcb/motor-driver-tpc8408/motor-driver-tpc8408-panel-2x4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor driver tpc8408-panel-2x4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask daisuke-ym before reusing the design.