2 layers84 × 84 mm
4 layers50 × 50 mm
PumpCon
Bergi84/GrowOMatic- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.65 mm
- Parts
- 138
- Nets
- 152
- Pads
- 573
- Tracks, vias
- 1,164, 231
- Pours
- 38
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2022
- Updated
- 1 Nov 2025
Overview
PumpCon is an open-source printed circuit board by Bergi84, from the Bergi84/GrowOMatic repository on GitHub. It is a 4-layer board of 50 × 50 mm with 138 parts on 152 nets, routed with 1,164 tracks and 231 vias.
It is built around the RP2040, AP63357QZV and MCP6001R-I/OT, with the W25Q16JVUXIQ, ULN2003F12FN and 74HC595 among its other parts. Its parts include 52 capacitors, 33 resistors, 20 ICs, 19 connectors and 7 inductors. It belongs with the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
AP63357QZV
VDFN-13(2x3)-40℃~+125℃@(TA) 1 22uA 3.5A 3.8V~32V 450kHz 800mV~32V Adjustable Buck Buck Built-in Yes VDFN-13(2x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
MCP6001R-I/OT
SOT-23-5-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASH
ULN2003F12FN
UDFN-3030-10-EP-40℃~+125℃ 1.2V 1A 20V 5.5V Four channels UDFN-3030-10-EP Darlington Transistor Arrays ROHSDiodes IncorporatedDarlington Transistor Arrays
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
BAT54W
SOD-123Schottky Diodeshongjiacheng
Parts
138| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C10, C16, C17, C18, C19, C22, C25, C27, C28, C32, C33, C43, C44, C47, C48 +1 |
| 9 | 10µ | Capacitor_SMD:C_1210_3225Metric | C9, C11, C12, C13, C14, C34, C37, C39, C40 |
| 8 | Conn_01x05 | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J12, J13, J14, J15, J16, J17, J18, J19 |
| 8 | ULN2003F12 | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm | U11, U12, U13, U14, U17, U18, U19, U20 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R12, R13, R19, R28, R29 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R7, R16, R20, R24, R25 |
| 6 | 22µ | Capacitor_SMD:C_1206_3216Metric | C29, C31, C45, C46, C49, C50 |
| 6 | DNP | Capacitor_SMD:C_0603_1608Metric | C4, C6, C24, C26, C35, C36 |
| 4 | 1µF | Capacitor_SMD:C_0603_1608Metric | C5, C23, C30, C52 |
| 4 | 74HC595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U9, U10, U15, U16 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C8, C15, C21 |
| 3 | 100µ | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C38, C41, C42 |
| 3 | 1R | Resistor_SMD:R_0603_1608Metric | R22, R32, R33 |
| 3 | 33µ | Inductor_SMD:L_12x12mm_H8mm | L5, L6, L7 |
| 2 | 1.1k | Resistor_SMD:R_0603_1608Metric | R30, R31 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R8, R14 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 20R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 6.8u | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L2, L4 |
| 2 | 62k | Resistor_SMD:R_0603_1608Metric | R9, R15 |
| 2 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6, J7 |
| 2 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J10, J11 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J8, J9 |
| 2 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4, J5 |
| 2 | DRV8231ADSGR | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U7, U8 |
| 1 | 12Mhz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 15µ | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L3 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 3.3n | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 390p | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 600R | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | AP2127K-ADJ | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AP63357Q | Bergi:V-DFN3020-13 | U6 |
| 1 | BAT54W | Diode_SMD:D_SOD-323 | D1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MCP6001R | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | TPS92200DxRXL | Bergi:VQFN-HR | U4 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | W25Q16JVUXIQ | Bergi:DFN-8-1EP_3x2mm_P0.5mm_EP0.3x1.6mm | U1 |
Questions
How big is the PumpCon PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.65 mm thick.
What parts does the PumpCon use?
138 parts, built around the RP2040, AP63357QZV, MCP6001R-I/OT and W25Q16JVUXIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PumpCon KiCad files?
From the Bergi84/GrowOMatic repository on GitHub, at the commit this page was made from: the board is Hardware/pumpCon/pumpCon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PumpCon design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bergi84 before reusing the design.
More from Bergi84/GrowOMatic
12- 2 layers96 × 96 mm
- 4 layers40 × 63 mm
- 4 layers50 × 45 mm
- 4 layers50 × 40 mm
- 4 layers35.5 × 35 mm
- 4 layers21.3 × 83 mm
- 4 layers54 × 100 mm
- 2 layers82 × 50 mm
- 4 layers30 × 30 mm
- 4 layers45 × 36.6 mm
- 2 layers279.5 × 36.6 mm
Similar boards
- 4 layers80 × 100 mm
- 4 layers120 × 100 mm
- 2 layers84 × 50 mm
Bldcdriver
corvusoul/BLDC-USB
USB compatible BLDC Motor Driver with RP2040 Microcontroller, DRV8304 Gate Driver and Infineon MOSFETs.
15 parts1 - 4 layers90 × 87.6 mm
- 4 layers73.6 × 59.8 mm
Leak sensor v1
lewipewi/leakwatch
A multi-channel leak sensor for equipment enclosures. Instead of reporting "wet / dry" like a normal leak probe, it measures how wet each enclosure is, on a separate channel per enclosure, and carries a second circuit…
90 parts - 2 layers52 × 51.3 mm
- 2 layers
CourseWorkScheme
NasterVill/BSUIR_Labs
Here are gathered all the labs from my CMSnN studying course.
40 parts27Apache-2.0 - 2 layers68.5 × 53.3 mm
Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26