Skip to the content
12345

MCP6001R-I/OT

Microchip TechnologyExtended

-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS

Part id
microchip/MCP6001R-I/OT
Category
Operational Amplifier
Package
SOT-23-5
Pins
5
In stock
20,208 at JLCPCB (C154973)
Used on
20 open-source boards

Overview

The MCP6001R-I/OT is an operational Amplifier made by Microchip Technology in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:MCP6001R, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 20,208 are in stock at JLCPCB (part C154973). 20 open-source boards in 15 repositories on GitHub use it.

Symbol

12V+3+4-5V-
Amplifier_Operational:MCP6001RFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

9
Supply, least
1.8 V · VDD, recommended operating min · p. 3
Supply, most
6 V · VDD, recommended operating max; Note 2 screening qualification · p. 3
Supply, absolute maximum
7 V · VDD – VSS, absolute max · p. 3
Works from
-40 °C · Industrial ambient temperature min · p. 4
Works up to
85 °C · Industrial ambient temperature max · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 3
Takes working
100 µA · VDD quiescent current typical, IO = 0, VDD = 5.5V, VCM = 5V · p. 3
A pin gives at most
30 mA · Output and supply pin current magnitude absolute max · p. 3
Junction to air (5L-SOT-23)
256 K/W · Junction to ambient thermal resistance typical · p. 4

What it is and has

4
Gain Bandwidth Product
1 MHz typical · p. 1
Input/output
Rail-to-rail · p. 1
Phase Margin
90° typical · p. 1
Protection
Input phase reversal prevention · p. 13

Around it

2
cap 0.01 µF to 0.1 µF
between VDD and VSS; Local supply bypass capacitor within 2 mm. · p. 14
cap 1 µF or larger
between VDD and VSS; Bulk supply capacitor within 100 mm; may be shared with nearby analog parts. · p. 14

Specifications

28
ParameterConditionsAs printedPage
VDD – VSSmax 7 V3
Current at Analog Input Pins (VIN+, VIN–)min -2 · max 2 mA3
Current at Output and Supply Pinsmin -30 · max 30 mA3
Storage Temperaturemin -65 · max 150 °C3
Maximum Junction Temperature TJmax 150 °C3
ESD Protection On All PinsHBMmin 4 kV3
Input Offset Voltage VOSVCM = VSS (Note 1)min -4.5 · max 4.5 mV3
Input Offset Drift with Temperature ΔVOS/ΔTATA= -40°C to +125°C, VCM = VSS; typical magnitude ±2.0typ 2 uV/°C3
Power Supply Rejection Ratio PSRRVCM = VSStyp 86 dB3
Input Bias Current: IBTypical magnitude ±1.0typ 1 pA3
Industrial Temperature IBInput bias current; TA = +85°Ctyp 19 pA3
Input Offset Current IOSTypical magnitude ±1.0typ 1 pA3
Common Mode Rejection Ratio CMRRVCM = -0.3V to 5.3V, VDD = 5Vmin 60 · typ 76 dB3
DC Open-Loop Gain (Large Signal) AOLVOUT = 0.3V to VDD – 0.3V, VCM = VSSmin 88 · typ 112 dB3
Output Short Circuit Current ISCVDD = 1.8V; typical magnitude ±6typ 6 mA3
Output Short Circuit Current ISCVDD = 5.5V; typical magnitude ±23typ 23 mA3
Supply Voltage VDDNote 2min 1.8 · max 6 V3
Quiescent Current per Amplifier IQIO = 0, VDD = 5.5V, VCM = 5Vmin 50 · typ 100 · max 170 uA3
Gain Bandwidth Product GBWPtyp 1 MHz4
Phase Margin PMG = +1 V/Vtyp 90 °4
Slew Rate SRtyp 0.6 V/us4
Input Noise Voltage Enif = 0.1 Hz to 10 Hztyp 6.1 uVp-p4
Input Noise Voltage Density enif = 1 kHztyp 28 nV/√Hz4
Input Noise Current Density inif = 1 kHztyp 0.6 fA/√Hz4
Industrial Temperature Range TAIndustrial grademin -40 · max 85 °C4
Operating Temperature Range TAIndustrial devices operate over this range with reduced performance; TJ must not exceed +150°Cmin -40 · max 125 °C4
Storage Temperature Range TAmin -65 · max 150 °C4
Thermal Resistance, 5L-SOT-23 θJA5L-SOT-23typ 256 °C/W4

Open-source boards using it

20See all 20
  • 2 layersCourseWorkScheme, the printed circuit board in 3D

    CourseWorkScheme

    NasterVill/BSUIR_Labs

    Here are gathered all the labs from my CMSnN studying course.

    40 parts27Apache-2.0
  • 2 layers68.5 × 53.3 mmIot wifi uno hw, the printed circuit board in 3D

    Iot wifi uno hw

    iotmakervn/iot-wifi-uno-hw

    Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno

    56 parts26
  • 2 layers37.1 × 8.6 mmNogasm, the printed circuit board in 3D

    Nogasm

    DunkelRatte/nogasm

    This is a fork of the original nogasm project.

    60 parts10
  • 2 layers273.1 × 186.1 mmIon pump controller, the printed circuit board in 3D

    Ion pump controller

    AlexW-proj/ion-pump-controller

    open source controller that takes 24V in and spits out 0 - 7000V, set by a knob with an adjustable ramp time

    63 parts2
  • 2 layers170 × 55.1 mmEC426, the printed circuit board in 3D

    EC426

    jacoblinnabary/JCOBB-Controller-Board

    Analog PWM generator for RC/drone control. Produces 1–2 ms pulses at a 20 ms frame using an RC ramp and comparator.

    49 parts1MIT
  • 4 layers190 × 145 mmMotor izleme karti, the printed circuit board in 3D

    Motor izleme karti

    melikeatilgan/asenkron-motor-bakim

    15 kW asenkron motor için arıza ağacı analizi, aylık bakım formu ve KiCad'de tasarlanmış üç izleme kartı

    191 parts1
  • 2 layers38.2 × 11.9 mmLeviosa, the printed circuit board in 3D

    Leviosa

    Kay-Jack/Leviosa

    A Levitating Pen

    59 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6001R-I/OT?

Yes. The symbol is Amplifier_Operational:MCP6001R and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6001R-I/OT?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the MCP6001R-I/OT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6001R-I/OT?

JLCPCB lists it as part C154973, with 20,208 in stock; the sellers' links on this page open their listings.

What can replace the MCP6001R-I/OT?

Parts like it in the library: the LMV321IDBVR by UMW, the LM321MF by UMW, the TLV9061IDBV by Texas Instruments and the LM321-TR by Gainsil. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6001R-I/OT?

20 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.