2 layers
CourseWorkScheme
NasterVill/BSUIR_Labs
Here are gathered all the labs from my CMSnN studying course.
34 parts27Apache-2.0
2 layers
CourseWorkScheme
NasterVill/BSUIR_Labs27Here are gathered all the labs from my CMSnN studying course.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 38
- Pads
- 153
- Tracks, vias
- 362, 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 May 2019
- Updated
- 14 Dec 2019
Overview
CourseWorkScheme is an open-source printed circuit board by NasterVill, from the NasterVill/BSUIR_Labs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 40 parts on 38 nets, routed with 362 tracks and 1 via.
It is built around the MCP6001R-I/OT and 74VHC86M. Its parts include 16 resistors, 11 connectors, 9 ICs and 4 capacitors.
Main components
2
MCP6001R-I/OT
SOT-23-5-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
74VHC86M
SOIC-14-40℃~+85℃ 1.5V 2V~5.5V 2uA 4 500mV 74VHC Series 8.8ns@5V,50pF 8mA 8mA Overvoltage-tolerant input、Local shutdown mode XOR Gate SOIC-14 Logic Gates ROHSonsemiLogic Gates
README
README.mdBSUIR (Belarusian State University of Informatics and Radioelectronics) laboratory works
Intro
Here I've gathered most of the laboratory works from the CMSnN (Computing Machines, Systems and Networks) course which I've been working on. Some of the labs are far beyond redemption, but all the others are or will be here.
Course Navigation
1 term
2 term
- Algorithms and Programming Foundations
- Arithmetic and Logic Basics of Computing Machines (Course Work)
3 term
- Programming Design and Programming Languages (C++)
- Lightning Paint (Course Work) An application for drawing and simple image editing
4 term
- System Software
- Cross Platform Programming
- Programming Design and Programming Languages (Assembly)
- Personal Computer Architecture
- Lightning Tuner (Course Work) An application for guitar tuning (written in Java) based of FFT algorithm
5 term
- Interfaces and Peripheral Devices
- Theoretical Foundations of Computer Networks
- Structural and Functional Organization of Electronic Computing Machines
- Circuit Design (Course Work)
6 term
- Digital Signal and Image Processing
- System Analysis
- High Performance Processors Architecture
- Software Development and Testing Technologies
7 term
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1625873-3 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R16 |
| 5 | Conn_01x01 | Connector_PinSocket_2.00mm:PinSocket_1x01_P2.00mm_Vertical | J3, J7, J8, J9, J10 |
| 4 | AD790 | AD790:PDIP-8 | U2, U7, U8, U9 |
| 4 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_Drill1.5mm | J4, J5, J6, J11 |
| 4 | GRM188R60J106ME47D | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C3, C4 |
| 4 | MCP6001R | Package_TO_SOT_SMD:SOT-23-5 | U1, U4, U5, U6 |
| 4 | RK163 | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | R12, R13, R14, R15 |
| 1 | 74VHC86M | 74VHC86M:SOIC127P600X175-14N | U3 |
| 1 | Conn_01x07 | Connector_PinSocket_2.00mm:PinSocket_1x07_P2.00mm_Vertical | J2 |
| 1 | DB25_Female_MountingHoles | Connector_Dsub:DSUB-25_Female_Vertical_P2.77x2.84mm_MountingHoles | J1 |
More from NasterVill/BSUIR_Labs
1Similar boards
- 2 layers68.5 × 53.3 mm
Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers37.1 × 8.6 mm
- 2 layers273.1 × 186.1 mm
Ion pump controller
AlexW-proj/ion-pump-controller
open source controller that takes 24V in and spits out 0 - 7000V, set by a knob with an adjustable ramp time
63 parts2 - 2 layers170 × 55.1 mm
EC426
jacoblinnabary/JCOBB-Controller-Board
Analog PWM generator for RC/drone control. Produces 1–2 ms pulses at a 20 ms frame using an RC ramp and comparator.
49 parts1MIT - 4 layers190 × 145 mm
Motor izleme karti
melikeatilgan/asenkron-motor-bakim
15 kW asenkron motor için arıza ağacı analizi, aylık bakım formu ve KiCad'de tasarlanmış üç izleme kartı
191 parts1 - 4 layers84.1 × 66 mm
- 2 layers38.2 × 11.9 mm
- 2 layers25 × 10 mm
Photodiode TIA
shyver/Precision-Light-Sensor-AFE
Designed as a modular Analog Front-End (AFE), this board converts ambient light intensity into a clean, stable analog voltage (0–3.3V) suitable for direct sampling by microcontrollers (e.g., ESP32, STM32, Arduino) using…
8 partsMIT
Questions
What parts does the CourseWorkScheme use?
40 parts, built around the MCP6001R-I/OT and 74VHC86M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CourseWorkScheme KiCad files?
From the NasterVill/BSUIR_Labs repository on GitHub, at the commit this page was made from: the board is CourseWorks/Circuit-Design/KiCad_scheme/CourseWorkScheme/CourseWorkScheme.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CourseWorkScheme design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).