2 layers84 × 84 mm
4 layers54 × 100 mm
DualLevelSensor
Bergi84/GrowOMatic- Size
- 54 × 100 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 95
- Nets
- 62
- Pads
- 253
- Tracks, vias
- 647, 109
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2022
- Updated
- 1 Nov 2025
Overview
DualLevelSensor is an open-source printed circuit board by Bergi84, from the Bergi84/GrowOMatic repository on GitHub. It is a 4-layer board of 54 × 100 mm with 95 parts on 62 nets, routed with 647 tracks and 109 vias.
It is built around the RP2040, AP63357QZV and W25Q16JVUXIQ, with the BAT54W among its other parts. Its parts include 36 resistors, 22 capacitors, 22 switches, 5 connectors and 3 ICs. It belongs with the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
AP63357QZV
VDFN-13(2x3)-40℃~+125℃@(TA) 1 22uA 3.5A 3.8V~32V 450kHz 800mV~32V Adjustable Buck Buck Built-in Yes VDFN-13(2x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASH
BAT54W
SOD-123Schottky Diodeshongjiacheng
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | capPad | Bergi:dummyPad | K1, K2, K3, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22 +6 |
| 20 | 100k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 +4 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C9, C10, C12, C15, C16, C19, C21, C23 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R4, R5, R6, R33, R34 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C8 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric | R35, R36 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1µF | Capacitor_SMD:C_0603_1608Metric | C13, C17 |
| 2 | 22µ | Capacitor_SMD:C_1206_3216Metric | C18, C20 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3, J4 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C11, C14 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10µ | Capacitor_SMD:C_1210_3225Metric | C6 |
| 1 | 12Mhz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 1µ | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 3.3n | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 4.7u | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | AP63357Q | Bergi:V-DFN3020-13 | U3 |
| 1 | BAT54W | Diode_SMD:D_SOD-323 | D1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | W25Q16JVUXIQ | Bergi:DFN-8-1EP_3x2mm_P0.5mm_EP0.3x1.6mm | U1 |
Questions
How big is the DualLevelSensor PCB?
It measures 54 × 100 mm and has 4 copper layers, 1.61 mm thick.
What parts does the DualLevelSensor use?
95 parts, built around the RP2040, AP63357QZV, W25Q16JVUXIQ and BAT54W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DualLevelSensor KiCad files?
From the Bergi84/GrowOMatic repository on GitHub, at the commit this page was made from: the board is Hardware/DualLevelSensor/DualLevelSensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DualLevelSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bergi84 before reusing the design.
More from Bergi84/GrowOMatic
12- 2 layers96 × 96 mm
- 4 layers50 × 50 mm
- 4 layers40 × 63 mm
- 4 layers50 × 45 mm
- 4 layers50 × 40 mm
- 4 layers35.5 × 35 mm
- 4 layers21.3 × 83 mm
- 2 layers82 × 50 mm
- 4 layers30 × 30 mm
- 4 layers45 × 36.6 mm
- 2 layers279.5 × 36.6 mm
Similar boards
- 2 layers84 × 50 mm
Bldcdriver
corvusoul/BLDC-USB
USB compatible BLDC Motor Driver with RP2040 Microcontroller, DRV8304 Gate Driver and Infineon MOSFETs.
15 parts1 - 4 layers90 × 87.6 mm
- 4 layers73.6 × 59.8 mm
Leak sensor v1
lewipewi/leakwatch
A multi-channel leak sensor for equipment enclosures. Instead of reporting "wet / dry" like a normal leak probe, it measures how wet each enclosure is, on a separate channel per enclosure, and carries a second circuit…
90 parts - 2 layers52 × 51.3 mm
- 4 layers21 × 51 mm
Easyduino RP2040
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
65 parts755CERN-OHL-P-2.0 - 2 layers172 × 152.9 mm
- 2 layers33.8 × 131 mm
MicrocontrollerInputModule
FrameworkComputer/InputModules
Reference designs and documentation for the Input Module system in the Framework Laptop 16
47 parts245 - 4 layers263.4 × 114.3 mm
