2 layers96 × 96 mm
2 layers84 × 84 mm
Nutzen
Bergi84/GrowOMatic- Size
- 84 × 84 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 400
- Nets
- 8
- Pads
- 950
- Tracks, vias
- 1,250, 825
- Pours
- 275
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Aug 2022
- Updated
- 1 Nov 2025
Overview
Nutzen is an open-source printed circuit board by Bergi84, from the Bergi84/GrowOMatic repository on GitHub. It is a 2-layer board of 84 × 84 mm with 400 parts on 8 nets, routed with 1,250 tracks and 825 vias.
It is built around the TVS2700DRV. Its parts include 125 connectors, 100 capacitors, 75 resistors, 50 ICs and 25 diodes.
Main components
1Parts
400| Qty | Value | Footprint | References |
|---|---|---|---|
| 75 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D2.0mm | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +59 |
| 50 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2 +34 |
| 50 | 10µ | Capacitor_SMD:C_1210_3225Metric | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +34 |
| 50 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +34 |
| 25 | 0R36 | Resistor_SMD:R_0603_1608Metric | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +9 |
| 25 | 15µH | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1 +9 |
| 25 | 1M | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +9 |
| 25 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3 +9 |
| 25 | 3V3 | Diode_SMD:D_SOD-323 | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +9 |
| 25 | TPS92200DxRXL | Bergi:VQFN-HR | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +9 |
| 25 | TVS2700DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 +9 |
Questions
How big is the Nutzen PCB?
It measures 84 × 84 mm and has 2 copper layers, 1 mm thick.
What parts does the Nutzen use?
400 parts, built around the TVS2700DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nutzen KiCad files?
From the Bergi84/GrowOMatic repository on GitHub, at the commit this page was made from: the board is Hardware/LedModul/LEDTreiber/Nutzen.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nutzen design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bergi84 before reusing the design.
More from Bergi84/GrowOMatic
12- 4 layers50 × 50 mm
- 4 layers40 × 63 mm
- 4 layers50 × 45 mm
- 4 layers50 × 40 mm
- 4 layers35.5 × 35 mm
- 4 layers21.3 × 83 mm
- 4 layers54 × 100 mm
- 2 layers82 × 50 mm
- 4 layers30 × 30 mm
- 4 layers45 × 36.6 mm
- 2 layers279.5 × 36.6 mm
Similar boards
- 4 layers100 × 95.1 mm
- 2 layers50 × 50 mm
- 4 layers99.5 × 69 mm
Pump controller reva
UWARG/pump-controller-hardware
Hardware for Competition 2026 Water Pump Controller on Project Valkyrie
244 parts - 2 layers215.8 × 159 mm
SNSP CPU-01
stonedDiscord/nonSNES
Super Nintendo Entertainment System PAL schematic and board layout
400 parts66GPL-3.0 - 2 layers171.5 × 127 mm
- 2 layers99.6 × 114.8 mm
MiniFPGA panel
MicrochipTech/veryVerilog
Learn Verilog basics the easy way with the world's smallest FPGA.
400 parts15 - 2 layers191.3 × 181.7 mm
IO Card G3
PerMalmberg/IO-Card-G3
This is my custom I/O card, third generation. Main purpose is to serve as an alarm system.
400 parts7MIT - 2 layers172.2 × 211.6 mm
Slider potentiometer
SolderedElectronics/Slider-potentiometer-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Slider-potentiometer-breakout designed by Soldered Electronics.
400 parts1