2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers
Cp2102
BASM/cp2102Silicon Laboratories CP2102 breakout board
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 10
- Pads
- 57
- Tracks, vias
- 144, 8
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 10 Oct 2013
- Updated
- 23 Apr 2014
Overview
Cp2102 is an open-source printed circuit board by BASM, from the BASM/cp2102 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 6 parts on 10 nets, routed with 144 tracks and 8 vias.
It is built around the CP2102. Its parts include 3 capacitors, 2 connectors and 1 IC.
Main components
1README
README.mdcp2102
Silicon Laboratories CP2102 breakout board.
Input mini-B, output 6 pins(SIL-6):
- 1 -- GND
- 2 -- Vcc(5v),
- 3 -- RX,
- 4 -- TX,
- 5 -- DTR,
- 6 -- RTS.
Good for NXP LPC13xx ARM programming.
Stage: work fine.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C0.1uF | SM0805 | C1, C3 |
| 1 | C1.0uF | SM1210 | C2 |
| 1 | CONN_6 | SIL-6 | P1 |
| 1 | CP2102 | QFN28 | U1 |
| 1 | USB-MINI-B | USB_MINI_B | CON1 |
Questions
What parts does the Cp2102 use?
6 parts, built around the CP2102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cp2102 KiCad files?
From the BASM/cp2102 repository on GitHub, at the commit this page was made from: the board is kicad/cp2102.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cp2102 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers93 × 60 mm
Hornbill Open Universal Remote
ExploreEmbedded/hornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control
75 parts27 - 4 layers97.6 × 145.1 mm
Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 2 layers93 × 60 mm
Hornbill lights
ExploreEmbedded/hornbill-lights
Firmware and App for controlling RGB LED lights with the Hornbill ESP32 Platform
54 parts16 - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers49.8 × 26.8 mm
- 2 layers25.4 × 62.9 mm
