2 layers124.5 × 81.3 mm
2 layers141 × 90 mm
BoardConsolePCB
bartoszp1992/boardConsole2Board computer for motorboat with GPS speedo, clock, tachometer and much more
- Size
- 141 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 128
- Pads
- 407
- Tracks, vias
- 816, 182
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2023
- Updated
- 17 Dec 2024
Overview
BoardConsolePCB is an open-source printed circuit board by bartoszp1992, from the bartoszp1992/boardConsole2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 141 × 90 mm with 134 parts on 128 nets, routed with 816 tracks and 182 vias.
It is built around the AT24C04CN, NE555P and TXS0108EPW, with the ESD9R3.3ST5G(ES), BC548 and BZV55C3V9 among its other parts. Its parts include 41 resistors, 39 capacitors, 12 diodes, 8 ICs and 7 connectors. It belongs with the STM32 boards of this library.
Main components
9
AT24C04CN
DIP-8EEPROMHGSEMI
NE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
ESD9R3.3ST5G(ES)
SOD-923SOD-923 ESD and Surge Protection (TVS/ESD) ROHSElecSuperUncategorised
BC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
BZV55C3V9
SOD-80-65℃~+200℃ 1 Independent 2uA@1V 3.7V~4.1V 3.9V 500mW 600Ω 85Ω SOD-80 Zener Diodes ROHSLGEZener DiodesCG90L
插件Gas Discharge Tube Arresters (GDT)Littelfuse
ES1D
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1A 1V@1A 200V 35ns 5uA@200V SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHSMDDDiodes - Rectifiers - Fast Recovery
SMBJ5.0A
DO-214AA(SMB)-65℃~+150℃ 5V 600W@10/1000us 65.3A@10/1000us 7V 800uA 9.2V TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C6, C11, C14, C16, C17, C22, C23, C29, C32, C37, C38, C39, C40 +1 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R6, R14, R23, R25, R32, R33, R37, R39 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R5, R19, R24, R36, R38, R40, R41 |
| 8 | 1u | Capacitor_SMD:C_0603_1608Metric | C15, C19, C20, C21, C33, C34, C35, C36 |
| 5 | 4k7 | Resistor_SMD:R_0603_1608Metric | R12, R13, R26, R27, R28 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3, TP5, TP7, TP8, TP9 |
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 100R | Resistor_SMD:R_0805_2012Metric | R29, R30, R31 |
| 3 | 220R | Resistor_SMD:R_1206_3216Metric | R7, R15, R18 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D3, D4 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R9, R35 |
| 2 | 0R | Resistor_SMD:R_2512_6332Metric | R16, R17 |
| 2 | 1000u 10V | BartLib_Capacitor:CP_D8mm_H13mm_P3.5mm_horizontal | C10, C28 |
| 2 | 100mA | Fuse:Fuse_0603_1608Metric | F2, F3 |
| 2 | 100u | BartLib_Capacitor:CP_D8mm_H13mm_P3.5mm_horizontal | C18, C24 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 10p 3kV(NM) | Capacitor_THT:C_Disc_D8.0mm_W5.0mm_P7.50mm | C2, C3 |
| 2 | 4k3 | Resistor_SMD:R_2512_6332Metric | R3, R34 |
| 2 | ESD9R3.3ST5G | Diode_SMD:D_SOD-923 | D10, D11 |
| 2 | IRML0030TR | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LL4148-DIO | Diode_SMD:D_MiniMELF | D5, D13 |
| 2 | NM | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | NM | Resistor_SMD:R_0603_1608Metric | R8, R11 |
| 1 | 1000uF 25V | BartLib_Capacitor:CP_D12.5mm_H22mm_P5.0mm_horizontal | C31 |
| 1 | 100n(NM) | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 100p(NM) | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 100p/0R | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10k | Potentiometer_THT:Potentiometer_ACP_CA9-H5_Horizontal | RV1 |
| 1 | 16M | Crystal:Crystal_SMD_HC49-SD | Y2 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 1k (NM) | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 47n | Capacitor_SMD:C_0603_1608Metric | L1 |
| 1 | 6k8 | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | ABC016002C34-FHA-R-01 | BartLib_Display:WH1602L1-YYH-CT010 | U7 |
| 1 | AT24C04C | Package_DIP:DIP-8_W7.62mm | U9 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | AZ1117-5.0 | Package_TO_SOT_SMD:TO-252-2 | U6 |
| 1 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BUTTONS | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | BZV55C3V9 | Diode_SMD:D_MiniMELF | D9 |
| 1 | Bart's Design | BartLib_Logo:BD_full 20x5.2 | X1 |
| 1 | CG90L | boardConsoleLib:CG90L | GD1 |
| 1 | CH004-2032 | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | ES1D | Diode_SMD:D_SMA | D7 |
| 1 | FUEL/TRIM | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | HCM1205/A2 | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | LS1 |
| 1 | L76-L | BartLib_GPS:L76-L | U5 |
| 1 | LOGO | BartLib_Logo:BD_small 3.5x2.6 | G*** |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | PRG_UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | SMA F | BartLib_Connector:SMA-F | J2 |
| 1 | SMBJ5.0A | Diode_SMD:D_SMB | D2 |
| 1 | STAT1 | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | STAT2 | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | STM32G071RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U8 |
| 1 | to HV cable | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
Questions
How big is the BoardConsolePCB PCB?
It measures 141 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BoardConsolePCB use?
134 parts, built around the AT24C04CN, NE555P, TXS0108EPW and ESD9R3.3ST5G(ES). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BoardConsolePCB KiCad files?
From the bartoszp1992/boardConsole2 repository on GitHub, at the commit this page was made from: the board is boardConsolePCB/boardConsolePCB.kicad_pcb and its schematic boardConsolePCB/boardConsolePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BoardConsolePCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers82 × 29 mm
Windbird fox electronics
windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.
51 parts15 - 2 layers84 × 29 mm
Main+front
pioupiou-archive/pioupiou-v1-electronics
This repository contains the electronic parts of the Pioupiou V1 wind sensor.
44 parts4 - 4 layers58.4 × 54 mm
- 4 layers73 × 98 mm
ALBERT FLIGHTCOMPUTER
felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.
161 partsMIT - 2 layers115 × 85 mm
Switches with lcd display
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
121 parts1 - 6 layers313 × 259.5 mm
Open8-vga motherboard
adham404/Open8-VGA
An 8-bit computer from 74HC logic: microcoded CPU, VGA, PS/2, on-board editor and assembler. Play it in your browser.
322 parts3MIT - 2 layers59.1 × 53.3 mm
