Skip to the content
4 layers36.1 × 37.8 mmGround RF Controller, the printed circuit board in 3D

Ground RF Controller

Apex-Ottawa-Team/hardware

All the PCBs and CAD files for our Apex weather balloon module

Size
36.1 × 37.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
33
Nets
41
Pads
124
Tracks, vias
145, 22
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 May 2025
Updated
11 Jun 2025

Overview

Ground RF Controller is an open-source printed circuit board by Apex-Ottawa-Team, from the Apex-Ottawa-Team/hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 36.1 × 37.8 mm with 33 parts on 41 nets, routed with 145 tracks and 22 vias.

It is built around the CP2102N-A02-GQFN28R, RC0805JR-071KL and RC0402JR-0710KL, with the CRCW040222K1FKEDC, CRCW040247K5FKEDC and SP0503BAHTG among its other parts. Its parts include 11 resistors, 8 capacitors, 3 diodes, 2 ICs and 1 connector. It belongs with the radio and wireless boards of this library.

Main components

7

README

README.md

The Ottawa Skybound Logo

Apex Hardware

Overview

This repository contains the hardware design files for Ottawa Skybound's weather ballon for Apex. The repository contains of multiple PCB modules designed in KiCad. The system includes a motherboard, wireless communication module, and various sensor interfaces.

Boards

LoRa Module: Wireless communication module using LoRa technology. Designed by Adam Turaj

Motherboard: Main control board for the Apex system. Designed by Adam Turaj

Sensor Board: A board containing an IMU and temperature reader. Designed by Joshua Gallinger

Strain ADC: Analog-to-digital converter board for strain measurements. Designed by Adam Turaj

Archive/RF Module: Previous design iteration of the LoRa board. Designed by Adam Turaj

Gas Sensor: Collects data on TVOC concentrations in the air. Designed by Aryan Zafer

Ground RF: Board used to communicate and receive data from the weather balloon. Designed by Aryan Zafer

Development Requirements

KiCad 9.0 or newer

License

This project is licensed under the GNU GENERAL PUBLIC LICENSE. The license can be found here.

Parts

33
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0402_1005MetricC1, C3, C6, C8, C20
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H3, H3, H3, H3
31kResistor_SMD:R_0805_2012MetricR3, R4, R6
34.7uFCapacitor_SMD:C_0402_1005MetricC2, C4, C7
210kResistor_SMD:R_0402_1005MetricR2, R8
2220Resistor_SMD:R_1206_3216MetricR7, R10
25k1Resistor_SMD:R_0603_1608MetricR1, R12
2Jumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
2LEDLED_SMD:LED_0603_1608MetricD2, D3
2LOGOLOGOG***, G***
122.1kResistor_SMD:R_0402_1005MetricR9
147.5kResistor_SMD:R_0402_1005MetricR5
1CP2102N-A02-GQFN28RPackage_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU1
1SP0503BAHTGGround RF Controller:SOT143D6
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ3
1~Ground RF Controller:EBYTE-E220-900T22DU2

More from Apex-Ottawa-Team/hardware

6
  • 2 layers40.5 × 23.3 mmStrain ADC, the printed circuit board in 3D

    Strain ADC

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    92 partsGPL-3.0
  • 2 layers49.8 × 39 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    36 partsGPL-3.0
  • 4 layers35.6 × 25.6 mmRF Module, the printed circuit board in 3D

    RF Module

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    29 partsGPL-3.0
  • 2 layers22.5 × 14 mmSensors, the printed circuit board in 3D

    Sensors

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    15 partsGPL-3.0
  • 2 layers22.5 × 14 mmGas Sensor, the printed circuit board in 3D

    Gas Sensor

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    14 partsGPL-3.0
  • 2 layers40 × 34.5 mmLoRa Module, the printed circuit board in 3D

    LoRa Module

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    13 partsGPL-3.0

Similar boards

  • 6 layers22 × 80 mmM2SmartHome, the printed circuit board in 3D

    M2SmartHome

    lukasznowarkiewicz/M2SmartHome

    Setting up a smart home hub, such as running Home Assistant, often requires hardware with sufficient performance and connectivity options.

    257 parts2
  • 6 layers80.8 × 65.2 mmPROC099A PCB, the printed circuit board in 3D

    PROC099A PCB

    kassemmkk/awr2243

    368 parts
  • 4 layers91 × 53.1 mmNff pcb, the printed circuit board in 3D

    Nff pcb

    o7-machinehum/flipper-blackhat

    Linux based WiFi pentesting device for the Flipper Zero.

    184 parts300
  • 4 layers117.5 × 30 mm4reel ee, the printed circuit board in 3D

    4reel ee

    o7-machinehum/4reel

    Stereo machine vision camera for outdoor mobile robotics.

    179 parts34MIT
  • 2 layers40.3 × 40.3 mmB VL53L7CX EVAL BRK R1.0, the printed circuit board in 3D

    B VL53L7CX EVAL BRK R1.0

    Boardoza/Boardoza_VL53L7CX_Multizone_ToF_Depth_Sensing_Eval_Board

    Boardoza VL53L7CX Time-of-Flight Evaluation Board provides multizone depth sensing and real-time 3D scene mapping with onboard STM32 processing.

    59 partsCC-BY-SA-4.0
  • 4 layers70.2 × 71 mmC3-27-epaper touch, the printed circuit board in 3D

    C3-27-epaper touch

    martinberlin/bistable-smart-switch

    An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)

    64 parts32Apache-2.0
  • 4 layers60 × 40 mmRCcar, the printed circuit board in 3D

    RCcar

    jeffreydthompson/Open_Roadster

    Support files for course creating BLE remote controlled car from scratch.

    95 parts1
  • 4 layers99 × 99.3 mmDeliverable4 schematics, the printed circuit board in 3D

    Deliverable4 schematics

    satomm1/EE256Project

    Project for EE256 at Stanford University, Autumn 2023

    114 partsMIT

Questions

How big is the Ground RF Controller PCB?

It measures 36.1 × 37.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Ground RF Controller use?

33 parts, built around the CP2102N-A02-GQFN28R, RC0805JR-071KL, RC0402JR-0710KL and CRCW040222K1FKEDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ground RF Controller KiCad files?

From the Apex-Ottawa-Team/hardware repository on GitHub, at the commit this page was made from: the board is Ground RF/Ground RF Controller.kicad_pcb and its schematic Archive/RF Module/RF Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ground RF Controller design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).